Tripp Lite TLNETCARD Manual


Læs gratis den danske manual til Tripp Lite TLNETCARD (44 sider) i kategorien Uafbrydelig strømforsyning (UPS). Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Tripp Lite TLNETCARD, eller vil du spørge andre brugere om produktet?

Side 1/44
User’s Guide
TLNETCARD
Documentation Notice: This User’s Guide is a supplement to the printed manual that came with your TLNETCARD or network-enabled
Tripp Lite device. Refer to the printed manual for instructions on hardware installation and basic conguration, including IP address assignment.
If you have misplaced your printed manual, refer to the downloadable electronic version by going to www.tripplite.com/support and entering
TLNETCARD in the search window.
1. Introduction ........................................................2
1.1 System Requirements 2 ....................................
2. Installation and Configuration 3 ............................
2.1 SNMP Configuration 3 ........................................
2.1.1 Configuring with TLNET Configurator 3 ............
2.1.2 Configuring via TLNET Supervisor 4 ................
2.1.3 Configuring via Telnet 5 ................................
2.1.4 Configuring via Text Mode 6 ..........................
2.1.5 Configuring through COM Port 9 ....................
3. TLNET Supervisor 10 ...............................................
3.1 Monitor .........................................................10
3.1.1 Information 10 ............................................
3.1.2 History 13 ...................................................
3.1.3 Environment 14 ...........................................
3.1.4 About 15 ....................................................
3.2 Devices.........................................................15
3.2.1 Management.......................................... 15
3.3 System .........................................................19
3.3.1 Administration 19 ........................................
3.3.2 Notification 24 ............................................
4. TLNET Configurator 27 ............................................
4.1 Batch Configuration 27 ......................................
4.2 Batch Upgrade 29 ..............................................
5. Modbus TCP 31 .......................................................
5.1 Configuration ................................................31
5.2 Operation......................................................32
6. Troubleshooting 40 ..................................................
Appendix A – Default System Settings 42 ...................
Appendix B – Default SNMP Settings 43 ......................
Table of Contents
1111 W. 35th Street, Chicago, IL 60609 USA • www.tripplite.com/support
Copyright © 2016 Tripp Lite. All rights reserved. All trademarks are the sole property of their respective owners.
2
TLNETCARD is an optional network card you can install in the accessory slot of a compatible UPS system. TLNETCARD connects your Tripp Lite
device to your Ethernet network for remote monitoring, control and condition reporting. You can manage the device from an SNMP Network
Management Station, a Web browser or telnet. The TLNETCARD can also send SNMP traps or email messages to the addresses you specify,
alerting you automatically to events such as power failures.
1.1 System Requirements
Tripp Lite UPS system with compatible accessory slot.
Ethernet network that supports the TCP/IP protocol. Firewall ports 3664 and 3665 may need to be opened.
One of the following options for remote monitoring and control:
SNMP-based Network Management Station (such as HP® OpenView®)
Web browser
VT-100 Telnet and/or SSH Client
For “Terminal Mode” configuration only:
Terminal emulation software program (such as TeraTerm Pro by Ayera Technologies)
Computer with available DB9 serial port
Warning: Use of this equipment in life support applications where failure of this equipment can reasonably be expected to cause the failure of the
life support equipment or to significantly affect its safety or effectiveness is not recommended. Do not use this equipment in the presence of a
flammable anesthetic mixture with air, oxygen or nitrous oxide.
1. Introduction


Produkt Specifikationer

Mærke: Tripp Lite
Kategori: Uafbrydelig strømforsyning (UPS)
Model: TLNETCARD
Bredde: 60.5 mm
Dybde: 131.8 mm
Højde: 19 mm
Vægt: 70 g
Brugervejledning: Ja
Produkttype: Netværksstyringskort
Pakkevægt: 250 g
Pakkedybde: 154.9 mm
Pakkebredde: 152.9 mm
Pakkehøjde: 40.9 mm
Ethernet LAN-porte (RJ-45): 1
Ethernet LAN-datahastigheder: 10, 100 Mbit/s
Sikkerhedsalgoritmer: SNMP, SSH
Kabelteknologi: 10/100BaseT(X)
Understøttede netværksprotokoller: IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv3, Telnet, SSH, FTP, DHCP, BOOTP and SCP
Webbaseret administration: Ja
LED-indikatorer: Ja
Bæredygtighedscertifikater: RoHS
Hovedkassen højde (udvendigt): 165.1 mm
Hovedkassens længde (udvendigt): 485.1 mm
Hovedkassens bruttovægt (udvendigt): 5690 g
Hovedkassens bredde (udvendigt): 307.3 mm
Værtsgrænseflade: 26-polet
Oprindelsesland: Kina
Produkter pr. hovedkasse (udvendigt): 21 stk
Ethernet-grænsefladetype: Hurtigt ethernet
Hovedkasse (udvendig) GTIN (EAN/UPC): 10037332191677
Syslog: Ja

Har du brug for hjælp?

Hvis du har brug for hjælp til Tripp Lite TLNETCARD stil et spørgsmål nedenfor, og andre brugere vil svare dig