Triwa Lansen Chrono Manual

Triwa Ur Lansen Chrono

Læs gratis den danske manual til Triwa Lansen Chrono (4 sider) i kategorien Ur. Denne vejledning er vurderet som hjælpsom af 29 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 15 anmeldelser. Har du et spørgsmål om Triwa Lansen Chrono, eller vil du spørge andre brugere om produktet?

Side 1/4
L A N S E N C H RO N O I N S T R U C T I O N S
SETTING TIME AND DATE
Setting the TIME:
1. Release crown by screwing counter-clockwise
2. Pull out the crown 2 steps
3. Set the time by screwing the crown
4. When time is set, push the crown all the way back and x it by screwing clockwise
RESET Chronograph hands:
1. Release crown by screwing counter-clockwise
2. Pull out the crown 2 steps
3. Push A to reset the hands position to zero. Continue to push A to put them forward.
4. When set, push the crown all the way back down and secure by screwing clockwise
Setting the DATE:
NOTE: DO NOT set the date between 9:00pm - 1:00am
1. Release crown by screwing counter-clockwise
Home /LANSEN CHRONO INSTRUCTIONS
2. Pull out the crown 1 step
3. Set the date by screwing the crown counter-clockwise
4. When date is set, push the crown back and x it by screwing clockwise
CHANGE STRAP
1. Using the TRIWA strap tool, place the strap changing end between the lug and the strap to reach the metal pin
2. Push down to release the spring and remove the strap
3. Move the pins from the old to the new strap
4. Place the pin end to the lug hole
5. Use the tool again to push down the spring so that the pin end reaches the hole for fastening
ATTACHING NATO/MONO STRAP


Produkt Specifikationer

Mærke: Triwa
Kategori: Ur
Model: Lansen Chrono

Har du brug for hjælp?

Hvis du har brug for hjælp til Triwa Lansen Chrono stil et spørgsmål nedenfor, og andre brugere vil svare dig