Trust KB-1300 Manual

Trust Tastatur KB-1300

Læs gratis den danske manual til Trust KB-1300 (6 sider) i kategorien Tastatur. Denne vejledning er vurderet som hjælpsom af 10 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 5.5 anmeldelser. Har du et spørgsmål om Trust KB-1300, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/6

KB-1300 PS/2 KEYBOARD

Method when using for the first time Chapter

Connecting (4.1)

Uninstalling old drivers and devices (4.2)

Installation in Windows (4.3)

U K

Checking (4.4)

Testing (4.5)

1 Introduction 1 Introduction

This instruction manual is for users of the ‘KB-1300 PS/2 KEYBOARD ‘ keyboard. The

‘KB-1300 PS/2 KEYBOARD’ keyboard has 13 special function keys.

This instruction manual is for users of the ‘KB-1300 PS/2 KEYBOARD ‘ keyboard. The

‘KB-1300 PS/2 KEYBOARD’ keyboard has 13 special function keys.

2 Safety 2 Safety

Carefully read the following instructions before use: Carefully read the following instructions before use:

1. The ‘KB-1300 PS/2 KEYBOARD’ keyboard does not require any special

maintenance. Use a slightly damp, clean cloth to clean the keyboard.

1. The ‘KB-1300 PS/2 KEYBOARD’ keyboard does not require any special

maintenance. Use a slightly damp, clean cloth to clean the keyboard.

2. Do not use aggressive substances, such as petrol or white spirit, to clean the

device. These may harm the material.

2. Do not use aggressive substances, such as petrol or white spirit, to clean the

device. These may harm the material.

3. Do not submerge the device in liquid. This will damage the device. Do not

use this device near water.

3. Do not submerge the device in liquid. This will damage the device. Do not

use this device near water.

4. Make sure nothing is placed on the power cable. Do not use this device in an

area where the cable can become worn or damaged as a result of people

walking over it.

4. Make sure nothing is placed on the power cable. Do not use this device in an

area where the cable can become worn or damaged as a result of people

walking over it.

5. Do not repair this device yourself. If you open this device, you may touch live

components. This device must only be repaired by qualified personnel.

5. Do not repair this device yourself. If you open this device, you may touch live

components. This device must only be repaired by qualified personnel.

6. Under the following circumstances, have the device repaired by qualified

personnel:

6. Under the following circumstances, have the device repaired by qualified

personnel:

a) The wire or the plug is damaged or has become worn. a) The wire or the plug is damaged or has become worn.

b) The device has come into contact with rain, water or another liquid. b) The device has come into contact with rain, water or another liquid.

3 Approval 3 Approval

- This device meets the essential requirements and other relevant conditions of

the applicable European directives. The Declaration of Conformity (DoC) is

available at www.trust.com/12836/ce .

KB-1300 PS/2 KEYBOARD

4 Installation

4.1 Connecting

Follow the instructions given below to connect the keyboard.

1. Turn the computer off.

2. Disconnect the old keyboard.

3. Connect the keyboard to your computer’s PS/2 port.

4. Turn the computer on.

5. The keyboard will now work as a standard keyboard.

You will have to install the software provided if you wish to use the multimedia keys.

4.2 Uninstalling old drivers and devices

The most common cause of faults during installation is the presence of a driver for a

similar, old product. The best solution is to first remove all drivers related to old

devices before installing the new driver.

1. Enter the Windows ‘Safe Mode’ (press F8 when starting Windows and then

select ‘Safe Mode’ from the menu which is displayed).

2. Go to ‘Start – Settings – Control Panel’ and double-click on the ‘Add/Remove

programs’ icon.

3. Find all the programs for similar, old devices and remove these by clicking on

the ‘Add/Remove’ button. When in the ‘Safe Mode’, it is possible for some

programs to appear twice. In that case, remove all programs which appear

twice.

4. Restart the computer.

4.3 Installing the software in Windows 95 / Windows 98 /

Windows ME / Windows 2000 / Windows XP

Note: The latest driver can be downloaded from www.trust.com/12836 . Check

whether a new driver is available and use this for the installation.

Note: Make sure all other programs are closed during the installation.

Note: During installation in Windows XP, you may receive a message saying

that the driver has not been signed. This does not cause a problem for

the functionality

Note: In the example, ‘D:\’ was used to indicate the CD-ROM drive. This may be

different for your computer.

1. Insert the CD-ROM into your CD-ROM drive. The installation program will

start automatically. If it does not start automatically, carry out the following:

2. Select 'Run' from the Start menu.

3. Type [D:\SETUP.EXE] and click on 'OK' to start the Trust software Installer.

4. Figure 1 will appear.

5. Click on the language you wish to use for the installation.

6. Click on ‘Touch Manager’ to start the installation.

7. Follow the on-screen instructions.

8. Your computer will be restarted after the installation has been completed.

Produkt Specifikationer

Mærke:	Trust
Kategori:	Tastatur
Model:	KB-1300
Materiale:	Plast
Forbindelsesteknologi:	Ledningsført
LED-indikatorer:	Ja
Enhedsgrænseflade:	PS/2
Kompatible operativsystemer:	Windows 95, 98, ME, 2000, XP
Understøttede Mac-operativsystemer:	Ingen
Intern:	Ingen
Mus inkluderet:	Ingen
Minimum plads på lagerdisk:	4 MB
Minimum systemkrav:	CD-ROM
Minimum processor:	Pentium
Minimum processorhastighed:	75 Mhz
Minimum RAM:	16 MB