Trust Predator XK 100 Manual

Trust Joystick Predator XK 100

Læs gratis den danske manual til Trust Predator XK 100 (2 sider) i kategorien Joystick. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Trust Predator XK 100, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Trust Predator XK 100

1. Connecting

1. Turn off your computer.

2. Connect the plug of the joystick to the 15-pin D-connector of the game port.

Note: The game port of your PC is usually located on the sound card, with the

connector at the back of your computer. Consult the manual of your sound card

to activate the game port on your sound card.

3. Turn on your computer.

2. Installation

Note: In order for you to be able to make optimum use of your joystick and game, DirectX

5.0 (or higher) must be installed before you install the joystick.

Note: Calibration of Trust Predator XK 100 can be different for each game. Consult the

manual of the software package being used.

2.1 Windows 95 / 98 / 2000

1. Start up Windows.

2. Click on ‘Start’ on your task bar and choose ‘Control Panel’.

3. Double-click the icon ‘Game Controllers’. See Figure 1.

Figure 1: Game-Controllers icon

4. Click on ‘Add’ to add a joystick.

5. Select ‘2 axis, 4-button joystick’.

6. Click the ‘Properties’ button.

7. Click the ‘Calibrate’ button. Follow the instructions on the screen.

8. To test your joystick, select the tab ‘Test’. Follow the instructions on your screen.

9. Trust Predator XK 100 is ready for use.

2.2 Windows 3.1x/DOS

The joystick does not have to be installed in Windows 3.1x and DOS. Calibration must then often

be carried out in the game. If necesssary, Consult the game’s manual to do this.

Note: Some games support only two fire buttons instead of four.

3. Fire buttons

Buttons 1 to 4 are fire buttons that work independently of each other. Switch A is used to activate

and deactivate the rapid-fire function of fire buttons 1 and 2.

Trust Predator XK 100

Figure 2: Helicopter view of Trust Predator XK 100

4. Troubleshooting

Problem Cause Possible Solutions

The plug is not

connected properly.

Connect the plug to the game port properly.

The game port of the

game card is not active.

Set the game port of the sound card to active.

Consult the manual of the sound card and of

the software being used.

The sound card is not

installed properly.

Re-install the sound card. Consult the manual

of the sound card.

The joystick

does not

respond.

No joystick is defined in

Windows 95 / 98.

Add the joystick. Consult Chapter 2.1.

The joystick

does not

function

properly.

The joystick is not

calibrated.

Calibrate the joystick. Consult the manual of

your software. Consult Chapter 2.1 for

Windows 95/98.

5. Maintenance and Use

Read the following instructions thoroughly:

1. Remove the plugs from the outlet before cleaning the joystick. Do not use any cleaning

fluids or spray cans. Wipe off the joystick with a damp cloth.

2. Do not use this joystick in damp or wet environments; e.g., bathrooms, damp cellars,

swimming pools etc.

Produkt Specifikationer

Mærke:	Trust
Kategori:	Joystick
Model:	Predator XK 100
Bredde:	135 mm
Dybde:	145 mm
Højde:	205 mm
Vægt:	500 g
Produktfarve:	Sort
Forbindelsesteknologi:	Ledningsført
Strømkilde:	Kabel
Kabellængde:	1.8 m
Enhedsgrænseflade:	Spilleport
Antal knapper:	4
Understøttede Windows-operativsystemer:	Windows 2000,Windows 95,Windows 98,Windows NT
Enhedstype:	Joystick
Understøttede gaming platforme:	PC