Uni-T LM320F Manual

Uni-T Måling LM320F

Læs gratis den danske manual til Uni-T LM320F (1 sider) i kategorien Måling. Denne vejledning er vurderet som hjælpsom af 66 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 33.5 anmeldelser. Har du et spørgsmål om Uni-T LM320F, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/1
5
109
Enter the Relative
Value mode
Relative Value
mode
Absolute Value
mode
User Manual
Angle Meter
LM320D/LM320E/LM320F
PREFACE
T k y for purchasi t w A le Meter. In order tohan ou ng he ne ng
use this product safely and correctly, please read this manual
thoroughly.
After reading this manual, it is recommended to keep the manual
at an easily accessible place, preferably close to the device, for
future refer ce. en
LI ITM ED WARRANTY AND LIAB YILIT
Uni-
Trend guarantees that the product is free from any defect in
material and workmanship within one year from the purchase date.
This warranty does not apply to damages caused by accident,
negligence,misuse,modification,contamination and improper
handling. The dealer shall not be entitled to give any other
warranty on
behalf of Uni-
Trend. If you need warranty service
within the warranty period, please contact authorized service
center or send the product back with problem description.This
warranty is the only compensation you can obtain.Uni-
Trend will
not be
responsible for any special,indirect, incidental or subsequent
damage or loss caused by any reason or speculation. As some areas
or countries do not allow imitations on implied warranties and
incidental or subsequent damage, the above limitation o li i ty andf ab li
stipulati may t ply o y . on no ap t ou
1
Product Structure
1
2
Laser ON/OFF Button nly LM320E, LM 0F) (o 32
3
-/+ Display Ic
on
4
5
Absolute/Relative Value Switch
6 Angle Displ ay
Absolute / Relative Value Display
Unit Switch/S d ON/OFF oun
Battery Display
Mute Icon
Data old Display -H
7
8
9
10
11
Angle Direction lcon
(in/ft,mm/m,%,°)Unit Switch
2
9
10
11
POWER/Data Lock Button
La er (ons Emi ion Hole ss ly LM320 320E LM, F)
Type- i P tC Charg ng or
bu on ontt to power .
bu on pott to wer off.
In wer-po
on state, short pre ss
Operati s:on
Power On n wer-: I po
off state l, ong press
Power Of n wer-f: I po
on , ong state l press
La 320ser ON/O (LMFF E)
button to make all lasers on,
bu on gatt a in, t he
button again to make the laser off on the right
bu agtton ain to make all lasers
off.
In wer-on po
state, short pre ss
laser on the left side is off,
La 320ser ON/O (LMFF F)
button to make all lasers on,
button again, th laser on the left side is off, e
bu ag hetton ain to make t laser off on the top
bu on ag hett ain to make t lase of on r f
the righ sidet
; ttS rt press ho bu on aga in o make a lasers o . t ll ff
and ho s rt press
si . Short pressde
and t short press hen
and ho s rt press
side. S rt press ho
and th s rt press en ho
3
Left-sided laser of
LM320E/LM320F
Right-sided laser of
LM320E/LM320F
Top-sided laser of
LM320F
Angle M urementeas
In werpo -on state, place the device on the inclined plane,
screen is the angle value betweent show val the he ue on
the inclined pl t riz tal pl e.ane and he ho on an
RE (Relative Val M ): F ue ode
In the measurement mode, short press button to enter
(Set the current value to 0), and
the Relative Val m e ue od
shor press it in o exi mo .t aga t t the de
fi re 2). gu
Ca bration M eli od
Place the device on the absolute horizon, continuously
long
the to zero calibration (see igure 3).au f Rotate the device 90
Rotate the device 90 d rees, press eg button and
CAL1
scre , s rt press mode (see fi re 1); CAL0 flashes on the en hogu
t calibration recover use o is a er wer- .he , and the f ft po on
calibration (see figure 5).Thec firm to ter the auto zero on en
s rt press ho button to confirm to enter
flas s on the rhe sc
een;
bu he eentton and CAL2 flas s on the rsc ; d rees, press eg
s rt press ho
button to confirm to enter
the auto zero calibration
d rees, presseg(see figure 4).Rotate the device 90 button
short press button toand CAL3 flas s on the r ; he sc een
three times to ter the self -en
calibration
press tt for bu on
bu on on en hett to c firm to ter t auto zero ca bration (s li ee
4
6
button to lock the
Data ckLo
In m surem t mode shor pre the ea en , t ss
curr measur data; s rt pre a in o lock he ta.ent ed ho ss ga t un t da
Figure 1
Figure 4 Figure 5
Figure 2 Figure 3
Data-Lock lcon
7
Charge
LM320D
Unit Switch
When low battery icon shows on the screen, please charge
the device with charging cable in the accessories. In the power-off
state, battery is fully charged when its icon stops flashing and not
showed on the screen any more.
LM320E/LM320F
Unit Switch
Sound Indication
ON/OFF
Unit Switch & Sound ON FF/O
within ‘measured value -1/8 ~ measured value’;when+’icon
shows, the range of measured value is within‘measured value ~
For LM D shor press IT to switch he unit.320 , t UN bu ontt t
For LM E/LM F320 320 , sho bu ourt press tton o make he s t t nd
For LM320E/LM320F, long press button to switch the unit
mm/m,%, or in/ n in it display, wft.I /ft un hen(in ° unit by f lt),de au
‘-‘icon shows on the screen, the range of
measured value is
measur value+1/8’.For example, 11.7/8 display means 11ed
and 7/8; 9 /8 display means 9 and 3/8. -3
LM D s rt press 320 , ho button to make i icati /of For nd on on f;
t s nd i icati on/o . he ou nd on ff
8
Type-C Charging Interface
M lsode
Tec cahni l Parameters
LM D320 LM E320 LM F320
R eang
M s m t ea ure en 4* ° 4*90 90° 4* °90
Resoluti ±0. °on 05 ±0. °05 ±0. °05
±0.2° A le A acyng ccur ±0.2° ±0.2°
±0.2° R t ty ±0.2°epea abili ±0.2°
N La er ne nes Li s 2 li s 3 sline
A le; P cent ; Metric s tem of /m; British system of in/ft.ng er age ys mm
N La ers A acyccur ±3 /5mmm
M tic Baseagne Two- Two-si m tic F r-si m ticsi m ticded agne ded agne ou ded agne
Relative/Absolute
A le ng
M s m tea ure en
A le Hold ng
Sc Rotationreen
Pow Off No ti s in 5 mi tes. er opera on nu
Mat ialser Al-a oy frame +ABS ll
Pow S lyer upp 3.7V 1000mAh lithium battery
Unit
Cautions:
CLASS 2 CONSUMER LASER PRODUCT
Model: LM320E
Resolution: 0.05°
IEC 60825-1:2014
EN 60825-1:2014/A11:2021
EN 50689:2021
Consumer Laser Product
Name: Angle Meter
Magnetic Base: Two-Sided
Measurement Range: 4×90° Accuracy: ±0.2°
Batery:3.7V 1000mAh Maximum Output Power: 1mW＜
Wavelength: 630nm~670nm
Laser Lines:2
Model: LM320F
Resolution: 0.05°
IEC 60825-1:2014
EN 60825-1:2014/A11:2021
EN 50689:2021
Consumer Laser Product
Name: Angle Meter
Magnetic Base: Four-Sided
Measurement Range: 4×90° Accuracy: ±0.2°
Batery:3.7V 1000mAh Maximum Output Power: 1mW＜
Wavelength: 630nm~670nm
Laser Lines:3
LM320E LM320F
Working
0 ~ + 50℃ ℃
N Class 2
N 630- n m, <1mW670
14 h 8h 6h
Size 83.5* 70 *35.5mm
Temperature
Laser Class
Laser Life
Battery Life
Package Angle Meter*1, Type-C Cable*1, Gift Box*1, User M al*1 anu
Compliance with lEC/EN 60825-1, EN 50689.
DO NOT STARE INTO BEAM
LASER RADIATION
3. r power saving, the device will be auto power off if no operations Fo
2. Do not damage the surface of device; use soft cloth towipe the dust
in 5 minutes.
for its accuracy.
1. Do not use organic solvents to wash the percision equipmet. Take
it far away from water and corrosives.
The manual is subject to changge without prior notice!
Due to different batches, the materials and details of actual products
may be slightly different from the graphic information, please refer to
the actual product received. Experimental data provided in the page
is from internal laboratory of UNI-T, but it should not be a reference
for customer to place orders. Any questions, please contact thecustomer
service, thanks!
P/N:110401113327X

Produkt Specifikationer

Mærke: Uni-T
Kategori: Måling
Model: LM320F

Har du brug for hjælp?

Hvis du har brug for hjælp til Uni-T LM320F stil et spørgsmål nedenfor, og andre brugere vil svare dig


Måling Uni-T Manualer

Uni-T

Uni-T A12T Manual

7 August 2025
Uni-T

Uni-T UT625B Manual

5 August 2025
Uni-T

Uni-T UT890C Manual

5 Juli 2025
Uni-T

Uni-T UT620T Manual

15 Juni 2025
Uni-T

Uni-T LM320F Manual

5 April 2025
Uni-T

Uni-T UT202+ Manual

18 Marts 2025
Uni-T

Uni-T UT501E Manual

20 Juli 2024
Uni-T

Uni-T UT213C Manual

12 Maj 2024
Uni-T

Uni-T UT278A+ Manual

11 Maj 2024
Uni-T

Uni-T UT658LOAD Manual

9 Maj 2024

Måling Manualer

Nyeste Måling Manualer

PCE Instruments

PCE Instruments PCE-VM 10 Manual

4 November 2025
PCE Instruments

PCE Instruments PCE-LT 12 Manual

3 November 2025
PCE Instruments

PCE Instruments PCE-RAM 5 Manual

3 November 2025
Steinberg

Steinberg SBS-DT-74 Manual

2 November 2025
Steinberg

Steinberg SBS-DT-72 Manual

2 November 2025
Dasqua

Dasqua 5111-0000 Manual

1 November 2025
Dasqua

Dasqua 1804-3611 Manual

31 Oktober 2025
LogiLink

LogiLink WZ0028 Manual

31 Oktober 2025
Dasqua

Dasqua 2015-1005 Manual

31 Oktober 2025
ANCEL

ANCEL AD310 Manual

31 Oktober 2025