Uni-T LM570LD-II Manual

Uni-T Laser pointer LM570LD-II

Læs gratis den danske manual til Uni-T LM570LD-II (2 sider) i kategorien Laser pointer. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om Uni-T LM570LD-II, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

P N 110401109312X/ :

PREFACE

Thank you for purchasing this brand new product. In order to use this product

safely and correctly, please read this manual thoroughly, especially the safety

notes.

After reading this manual, it is recommended to keep the manual at an easily

accessible place, preferably close to the device, for future reference.

LIMITED WARRANTY AND LIABILITY

Uni-Trend guarantees that the product is free from any defect in material and

workmanship within one year from the purchase date. This warranty does not

apply to damages caused by accident, negligence, misuse, modification,

contamination or improper handling. The dealer shall not be entitled to give any

other warranty on behalf of Uni-Trend. If you need warranty service within the

warranty period, please contact your seller directly.

Uni-Trend will not be responsible for any special, indirect, incidental or

subsequent damage or loss caused by using this device.

PRODUCT APPEARANCE

1. Laser emission window

2. Power/lock switch

3. Battery compartment

4. 1/4 inch adapter screw hole

5. Laser switch

SAFETY INSTRUCTION

To use the product properly, please read the user manual and safety information

thoroughly before use. Users must fully understand and observe all the

instructions.

Notes:

Do not expose eyes to the laser beam during operation. Prolonged exposure

to the laser beam may cause eye damage.

Some product set provide with accessory glasses. Please note that this kind

of glasses is not safety glasses. It only helps user to easily identify the laser

beam in strong ambient light or far away from the laser meter source.

Warnings:

The following print (or label) shown on the product describes safety and

related disposal information.

Never stare into at the laser beam directly or observing it by any optical

instrument. Do not set the meter at a visual height (to avoid injury caused by

exposing eyes to laser beam).

Do not disassemble or modify the laser meter in any way. No inner parts can

be repaired by users. Unauthorized modifications may emit harmful laser

radiation.

Keep the laser meter away from children or danger may occur. Class II laser

should not be observed for more than 2s.

OPERATION MODE

Tap the laser switch on the top or toggle the power/lock switch to turn on the

meter and the laser line.

only when the meter's pendulum is locked, tap the laser switch can Note:

turn off the meter and laser line.

Manual Mode

After the meter is turned on, manual mode will be enabled when the pendulum

is in locked position. The laser line can set to different angles as needed. Note:

In the manual mode, the laser line cannot be horizontal/vertical reference.

In the manual mode, self-leveling mode is turned off. The laser line flashes

every 5s to indicate that manual mode has been turned on.

MAINTENANCE

The meter has been carefully calibrated and packaged according to various

precise specifications before leaving the factory. It is recommended to

perform accuracy test before the first-time use and perform test regularly,

especially during high precision requirements.

Turn the meter off and make sure the pendulum is locked when it is not in use.

In the manual mode, the self-leveling mode is off, which means the laser

beam cannot be horizontal/vertical reference.

Do not short-circuit the battery contacts, charge the alkaline battery, or throw

the battery into fire, these actions may cause dangerous accidents.

Do not use old and new batteries simultaneously. Be sure to replace all of

them with the same type of batteries in same brand.

Keep the battery out of the reach of children.

Remove the batteries if the meter is not in use for long period.

Do not expose the meter to sunlight or high

temperatures. The meter shell and some parts are made of plastic, which

may be damaged in high temperature environments.

Clean the outer plastic parts with a damp cloth. It is not recommended to

clean it with dissolvent. Wipe away moisture with a dry soft cloth before

putting the meter into the box.

Store the meter properly in its carrying bag or package. Remove the batteries

during long-time storage to avoid battery leakage.

Do not dispose the meter into household trash. Dispose the battery or related

electronic waste according to local laws and WEEE (Waste Electrical and

Electronic Equipment) rules.

Model

Laser type

Laser wave length

Laser power

Laser class

Number of laser lines

Horizontal/Vertical accuracy

Laser line width

Horizontal/Vertical emission angle

Working distance (Line)

Operating temperature range

Storage temperature range

Self-leveling time

Self-leveling range

Battery type

Product size

Net weight

Operating time

Standard accessories

LM570LD-II

Green laser LD

520nm±5nm

20mW

Class II

≤±3mm @ 10m

<4mm/10m (at 80~100lux indoor)

≥120°

10m (at 30~100lux indoor)

-10°C~+40°C

-20°C~+70°C

3°±1°

2*1.5V AA (LR6)

85.5mm x 62mm x 90.3mm

0.24kg ±5%

4h (all lasers on)

Device, wall mount, manual,

carrying bag, package, batteries

Self-leveling Mode

Self-leveling mode can only be turned on when the meter pendulum is unlocked.

The laser line will flash quickly at a frequency of 2Hz to indicate its operating

mode/state when the meter exceeds self-leveling working range (3°±1°).

In the self-leveling mode, its full-time pulse function can be used normally with

the laser receiver.

TECHNICAL SPECIFICATIONS

Produkt Specifikationer

Mærke:	Uni-T
Kategori:	Laser pointer
Model:	LM570LD-II

Har du brug for hjælp?

Hvis du har brug for hjælp til Uni-T LM570LD-II stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Laser pointer Uni-T Manualer

6 August 2025

5 August 2025

31 August 2024

31 August 2024

31 August 2024

Uni-T LM570LD-II Manual

31 August 2024

Uni-T LM576 Manual

31 August 2024

Uni-T LM573LD-II Manual

31 August 2024

Uni-T LM585 Manual

31 August 2024

Uni-T LM550G-LD Manual

31 August 2024

Laser pointer Manualer

Nyeste Laser pointer Manualer

RIX MK-R3000 Manual

4 November 2025

DeWalt DWHT78200 Manual

3 November 2025

DeWalt DWHT77200 Manual

31 Oktober 2025

Bosch GLL 2-15 G Professional Manual

13 Oktober 2025

Blue Tees Golf Series 2 Pro Manual

8 Oktober 2025

Laserliner DistanceMaster 50 Manual

7 September 2025

Laserliner DistanceCheck 25 Manual

7 September 2025

American DJ Ani-Motion Manual

6 September 2025

DeWalt DW0880 Manual

3 September 2025

DeWalt DW030 Manual

3 September 2025