Unicol HTS2 Manual

Unicol Ikke kategoriseret HTS2

Læs gratis den danske manual til Unicol HTS2 (4 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 33 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 17 anmeldelser. Har du et spørgsmål om Unicol HTS2, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/4

WARNING

Please carefully inspect the product before assembling. If you notice any apparent damage, call your

carrier claims agent and do not continue the installation until it has been reviewed. Please watch for

pinch points. Do not put your ﬁngers between moveable parts. Do not tamper with or disassemble any

spring loaded parts. Before installing, make sure that the supporting surface will support ﬁve times the

combined load of the solution and the hardware. Never exceed the maximum load capacity. Please also

layout all components to ensure that you have all of the required parts before proceeding (see BOM list

on following page). Use of this product for anything other than its speciﬁed use may result in failure or

personal injury. This product is intended for indoor use only. We recommend using a qualiﬁed trades

person for installation. Use an assistant or lifting equipment to lift and position products.

For support, please call: +44 (0)1865 767676 or email: sales@unicol.com

Revised 15/12/20

01865 767676

sales@unicol.com

www.unicol.com

*Please check model speciﬁc details before installing*

HTS1 / HTS2

Screen Size: Guide Max. Weight: 46-110” 60-110kg

Produkt Specifikationer

Mærke:	Unicol
Kategori:	Ikke kategoriseret
Model:	HTS2
Dybde:	95 mm
Højde:	568 mm
Produktfarve:	Sort
Produkttype:	Beslag
Panel montering grænseflade:	200 x 200,600 x 400 mm
Maksimal vægtkapacitet:	60 kg
Forbedret kabelstyring:	Ja
Maksimal skærmstørrelse kompatibilitet:	70 "
Minimal skærmstørrelse kompatibilitet:	46 "
Justerbar bredde:	Ja
Bredde justeringsområde:	680 - 1575 mm