USX-Mount SAS008 Manual

USX-Mount Højtalerbeslag SAS008

Læs gratis den danske manual til USX-Mount SAS008 (2 sider) i kategorien Højtalerbeslag. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 16 anmeldelser. Har du et spørgsmål om USX-Mount SAS008, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/2
SAS008
INSTRUCTION MANUAL
If you have any questions along the way,
please leave us
message via Amazon.
We’re ready to help!
R
USA-B1
1
2
3
4
Does your soundbar
(including accessories)
weigh MORE than
22 lbs. (10 kg)?
Do you have
all the tools
needed?
(NOT INCLUDE)
Tape
Measure
CAUTION
Pencil Electric
Drill
No? Perfect – you may continue.
Yes? This mount is NOT compatible.
Drywall with
wood studs?
CAUTION: DO NOT exceed the maximum weight
indicated. This mounting system is intended for use only
with the maximum weights indicated. Use with products
heavier than the maximum weights indicated may result
in collapse of the mount and its accessories, causing
possible injury.
Solid concrete
?
3/8 in.
(10 mm)
Socket
Wrench
● Do not use this product for any purpose not explicitly specified by manufacturer
● Manufacturer is not responsible for damage or injury caused by incorrect assembly or use
Unsure?
Message to us.
3/8 in.
(10 mm)
Masonry
Drill Bit
Hammer
Level
If you want to mount
on the wall, you
should know what
your wall made of.
2
FRONT VIEW
3-D
3
WARNING: This product contains small items that could be a choking hazard if swallowed. Before starting assembly, verify all parts
are included and undamaged. If any parts are missing or damaged, do not return the damaged item to your dealer; contact
Customer Service.
Never use damaged parts!
NOTE: Not all hardware included will be used.
Parts and Hardware for Brackets Installation
x
2
￠
1.6
x
25
mm
Nail
Wall
Bracket
M
6
x5
0
mm
Lag Bolt
Allen Key
x
1
x
2
x
24
4
5
6
CAUTION: PLEASE READ ENTIRE MANUAL PRIOR O USE AND SAVE THESE INSTRUCTIONS T
Parts and Hardware
Dimensions
!
STEP 1 Split wall bracket into 2 parts
Max:
22 LBS
(10 kg)
70mm
[2.76in]
72mm
[2.83in]
Contact us
and
message to us
to have these
additional pieces shipped directly to you.
Concrete Wall
Anchor
2pcs
Co
ncrete wall anchor (NOT INCLUDED)
06
03 04
05
CAUTION: Avoid potential personal injury or property damage!
● Drywall covering the wall, must exceed 3/8 in. (10 mm)
Loosen the screw (the screw remains on the hook) with allen key , and split it into two parts: the
wall plate and the hook .
06
01
02
05
Screw
Loosen
1. Please measure the length (L) of your soundbar .
Option 1 For Drywall
STEP 2 Wall plate installation
Stud
Finder
1/8 in.
(3 mm)
Wood
Drill Bit
Solid Drywall
Per
fect!
Per
fect!
Per
fect!
Wood Stud Install
Concrete Install
Drywall Install
RIGHT VIEW - RETRACTED RIGHT VIEW -
EXTENDED
105mm
[4.13in]
160mm
[6.30in]
2. Fixing the wall plates to the drywall with 24 steel nails .
IMPORTANT: The installation distance of the two wall plates should be less than the soundbar
length (L), and the distance between the wall plate and the ground is H.
Before putting soundbar, please try to pull the wall plate to make sure that it has been assembled on
the wall tightly.
01
04
L
＜
L
H
H
Drywall
Level
05
01
02
04
01
7
3. Insert 2 anchors.
CAUTION: Be sure the anchors are seated flush with the concrete surface.
CAUTION: Improper use could reduce the holding power of the lag bolt.
DO NOT over-tighten the lag bolts
.
4. Install wall plate using 2 lag bolts . Tighten the lag bolts only until they are pulled firmly against
the wall plate.
9
Concrete Wall
Anchor
(Not included)
3/8"
(10mm)
2.16"(55mm)
CAUTION: Avoid potential personal injury or property damage!
● Mount the wall plate assembly directly onto the concrete surface
● Minimum
solid concrete
thickness: 8 in. (203 mm)
2. Drill 2 pilot holes using a 3/8 in. (10 mm) diameter masonry drill bit.
IMPORTANT:
The installation distance of the two wall plates should be less than the soundbar
length (L), and the distance between the drilling position and the ground is H. Pilot holes
must be drilled to a depth of 2.16 in. (55 mm).
8
10
12
11
Before putting soundbar, please try to pull the wall plate to make sure that it has been assembled on
the wall tightly.
Please
message to us
to
ask for
these
additional
anchors shipped directly to you.
Option 2 For solid concrete wall or brick wall
01
03
Level
03
01
3. Drill pilot holes using a 1/8 in. (3 mm) diameter drill bit.
IMPORTANT: Pilot holes must be drilled to a depth of 2.16 in. (55 mm). Be sure to drill into the center
of the studs.The distance between the drilling position and the ground is H.
4.
F
ix wall plate
to the wall
with
lag bolts
.
CAUTION: Improper use could reduce the holding power of the lag bolt.
DO NOT over-tighten the lag bolts
.
2.16"(55mm)
1
/
8
"
(
3
mm)
Level
NEVER USE ANCHOR FOR WOOD STUDS ASSEMBLY
Before putting soundbar, please try to pull the wall plate to make sure that it has been assembled on
the wall tightly.
01
03
03
01
Centre line
CAUTION: Avoid potential personal injury or property damage!
● Drywall covering the wall, must not exceed 5/8 in. (16 mm)
● Minimum
wood stud
size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm)
● Stud center must be verified.
1. Please measure the length (L) of your soundbar.
2. Finding your wooden studs and mark the center of the wooden studs.
Option 3 For wood studs
1. Please measure the length (L) of your soundbar.
IMPORTANT:
The installation distance of the two wooden studs centre should be less than the
soundbar length (L), If it is longer than the soundbar length (L), you can finish the
installation on drywall directly as option 1.
Again, find another wood stud
Hang the hooks onto wall plate and tighten the screws.
If the width of your soundbar is within 3.5” ~5.6”, you can just simply put your soundbar on the hooks.
You can adjust the hook width by bolts as below drawing shown.
Tighten
Loosen
Soundbar
STEP 3 Hang the Hooks onto wall plate
02
05
Screws
Tighten
STEP 4 Put the Soundbar onto hooks
05
05
Concrete Wall
L
＜
L
H
H
L
＜
L
H
H
Concrete Wall Concrete Wall

Produkt Specifikationer

Mærke: USX-Mount
Kategori: Højtalerbeslag
Model: SAS008

Har du brug for hjælp?

Hvis du har brug for hjælp til USX-Mount SAS008 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Højtalerbeslag USX-Mount Manualer

USX-Mount

USX-Mount SAS008 Manual

20 Juni 2025
USX-Mount

USX-Mount XAS010 Manual

17 Juni 2025
USX-Mount

USX-Mount XAS005 Manual

10 Juni 2025
USX-Mount

USX-Mount XAS002-01 Manual

9 Juni 2025

Højtalerbeslag Manualer

Nyeste Højtalerbeslag Manualer

Triangle

Triangle S01 Manual

6 Oktober 2025
APart

APart MASK2CMT-W Manual

6 Oktober 2025
Triangle

Triangle S04 Manual

6 Oktober 2025
Triangle

Triangle S08C Manual

5 Oktober 2025
Triangle

Triangle S08 Manual

5 Oktober 2025
Triangle

Triangle S05 Manual

5 Oktober 2025
APart

APart MASK2CMT Manual

5 Oktober 2025
Insignia

Insignia NS-SPST2B Manual

29 September 2025
Sanus

Sanus WSWME11 Manual

28 September 2025
Sanus

Sanus VMCC1 Manual

27 September 2025