V-TAC VT-11410 Manual


Læs gratis den danske manual til V-TAC VT-11410 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2 anmeldelser. Har du et spørgsmål om V-TAC VT-11410, eller vil du spørge andre brugere om produktet?

Side 1/1
DIMMABLE DRIVER
INTRODUCTION & WARRANTY
Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please read these
instructions carefully before starting the installation and keep this manual handy for future reference.
If you have any another query, please contact our dealer or local vendor from whom you have
purchased the product. They are trained and ready to serve you at the best. The warranty is valid for
5 years from the date of purchase. The warranty does not apply to damage caused by incorrect
installation or abnormal wear and tear. The company gives no warranty against damage to any
Hours Daily operation. Usage of product for 24 Hours a day would void the warranty. This product is
warranted for manufacturing defects only.
Caution, risk of electric shock.
This marking indicates that this
product should not be disposed
of with other household wastes.
TECHNICAL DATA
WIRING DIAGRAM OF TRIAC DIMMING OPERATION:
DIMMING OPERATION:
PRODUCT TERMINALS
OUTPUT CURRENT ADJUSTABLE VIA A BUILT-IN DIP SWITCH
WARNING:
5
YEARS
WARRANTY
*
1. Please make sure to turn off the power before starting the installation.
2. Connect the AC input source to the power supply and the AC plug (not in the scope of delivery
included). AC plugs can be bought in any hardware store.
3. Wire the DC output of the power supply unit to the LED Panel.
4. Plug the power adapter into the socket to illuminate the whole system.
INSTALLATION:
1) Please make sure to turn off the power before starting the installation.
2) Observe the connection diagram provided before connecting to the power supply
3) Installation should be done by a qualified electrician.
4) Disconnect the power supply when wiring or soldering the LED.
5) Please ensure to check the DC output of the power supply matches with the DC Input of the Panel.
6) For LED Modules only
7) For Infoor use only
AC-L Input terminal of AC live wire
AC-N Input terminal of AC neutral wire
INPUT
Output Voltage Output Current 1 2 3 4 DIP Switch Diagram
9-38Vdc 1050mA ON ON ON ON
9-40Vdc 1000mA ON ON ON OFF
9-42Vdc 950mA OFF ON ON ON
9-42Vdc 900mA OFF ON ON OFF
9-42Vdc 850mA OFF OFF ON ON
9-42Vdc 800mA OFF OFF ON OFF
9-42Vdc 750mA OFF OFF OFF ON
9-42Vdc 700mA OFF OFF OFF OFF
CURRENT ADJUSTMENT TABLE
LED+ Positive electrode output of LED driver
LED- Negative electrode output of LED driver
OUTPUT
20
PAP
SKU 11410
MAX INPUT CURRENT MAX 0.3A
INPUT VOLTAGE
AC:220-240V, 50/60Hz
RATED POWER 40W(MAX)
PF >0.9
AMBIENT TEMPERATURE (ta) 45°C
CRITICAL TEMPERATURE (tc) 90°C
OUTPUT POWER DC:9-38V
INPUT STANDBY MODE 0.75-1.5mm²
OUTPUT STANDBY MODE
0.5-1.0mm²
STANDBY POWER (Psb) Psb<0.5W
EFFICIENCY IN FULL-LOAD >83%
Triac/ELV Dimmer
0~100% Dimming
Input
Output
Neutral - black or blue
Live - brown or red
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT PLEASE REACH OUT TO US AT
SUPPORT@VTACEXPORTS.COM V-TAC HOUSE, KELPATRICK ROAD, SLOUGH, BERKSHIRE, SL1 6BW, UK.
NOTE: The dimmable driver cannot no-load


Produkt Specifikationer

Mærke: V-TAC
Kategori: Ikke kategoriseret
Model: VT-11410

Har du brug for hjælp?

Hvis du har brug for hjælp til V-TAC VT-11410 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret V-TAC Manualer

V-TAC

V-TAC VT-11410 Manual

12 Januar 2026
V-TAC

V-TAC VT-10184 Manual

19 December 2025
V-TAC

V-TAC VT-81005 Manual

16 December 2025
V-TAC

V-TAC VT-8027 Manual

8 Oktober 2025
V-TAC

V-TAC VT-6076 Manual

8 Oktober 2025
V-TAC

V-TAC VT-10242W Manual

8 Oktober 2025
V-TAC

V-TAC VT-16076W Manual

8 Oktober 2025
V-TAC

V-TAC VT-8094 Manual

8 Oktober 2025
V-TAC

V-TAC VT-120137E Manual

8 Oktober 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer