V-TAC VT-3240 Manual

V-TAC Insektfjerner VT-3240

Læs gratis den danske manual til V-TAC VT-3240 (14 sider) i kategorien Insektfjerner. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om V-TAC VT-3240, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/14

WEEE Number: 80133970

INSTALLATION INSTRUCTION

IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU

FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST DEALERS.

V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B

OPERATING INSTRUCTION:

• Check the local voltage before powering the device. Plug in the appliance under normal

input voltage and turn on the switch to the ON side to start the appliance. To shut down the

appliance please turn the switch to OFF side and pull out the plug to cut the power supply.

DO NOT intend to touch the internal high voltage grids when the device is powered on due

to risk of electric shock. Never put metal objects inside the grids while the device is powered

On/Off.

• Repair should be carried out by the manufacturer or qualified electricians. Never remove

any fixed part of the appliance to make any internal adjustment to avoid electric shock. If

the supply cord, the lamp, starters or other part of appliance is damaged, the manufacturer,

its service agent or similarly qualified person must replace it in order to avoid a hazards.

• Unplug the appliance before cleaning. Use suitable brush to clean the high voltage metal

and throw away accumulated insects on collection tray every week. Be sure to cut off

electricity when cleaning and repairing the machine.

• Make sure that your local voltage and frequency is suitable for the machine. Ensure

earthing-connection to prevent damage or danger.

• Don’t touch the high-voltage grid by fingers or metal.

• Non waterproof, no washing by water, no placing in rain. Not suitable for use in garages,

stables and similar environment. Can be cleaned each twice weeks by a brush to clean the

high voltage.

• Not for use in inflammable and/or explosive locales and the similar environment.

WARNING!

• The appliance is indoor use only.

• It is not suitable for use in barns, stables and similar locations.

• The appliance is not to be used in locations where flammable vapors or explosive dust is

likely to exist.

• Only hang or mount the appliance on a place where children can’t reach. (Above 2.0 m).

• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent

or similarly qualified persons in order to avoid a hazard.

• Please make sure to turn off the power before starting the installation.

• The lamps in this appliance cannot be replaced. Scrap the appliance when the lamps

cease to operate

• High voltage 2200~2500V. Never touch the high tension grid when the appliance is

working. The appliance should be kept away and out of reach from children.

• This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless they

have been given supervision or instruction concerning use of the appliance by a person

responsible for their safety. Children should be supervised to ensure that they do not play

with the appliance.

• This appliance can be used by children aged from 8 years and above and persons with

reduced physical, sensory or mental capabilities or lack of experience and knowledge if they

have been given supervision or instruction concerning use of the appliance in a safe way

and understand the hazards involved. Children shall not play with the appliance. Cleaning

and user maintenance shall not be made by children without supervision.

This marking indicates that this

product should not be disposed

of with other household wastes.

Caution, risk of electric shock.

ANGEROUS

VOLTAGE

Inner cover board

Outer cover board

Collection tray fixing plate

High-voltage grid support

Lampstand

Toplid

PCB

Mesh

Lamp

Collection tray

INSECT KILLER

INTRODUCTION

Thank you for selecting and buying V-TAC product. V-TAC will serve you the best. Please

read these instructions carefully before starting the installation and keep this manual handy

for future reference. If you have any another query, please contact our dealer or local

vendor from whom you have purchased the product. They are trained and ready to serve

you at the best.

• The insect killer attracts flying insects (flies, moths, mosquitoes, and other pests) via the

UV light, and electrocutes them through the electrically charged, high voltage metal grids.

The insect killer is designed with high efficiency and safety, with non-clogging killing grid

non-rust, cracked or fade surface.

• The UV (Ultraviolet Rays) light tube is completely harmless to humans and pets.

• The outer mesh protects the user from touching the high tension grid.

• No chemicals are utilized in this equipment –– no fumes, no smell, no sprays, no mess,

and pollution-free. Ideal for indoor use (residences, factories, restaurants, butcher’s storage,

hospitals, etc.)

• Please turn off all other light source in the room for the best performance..

TECHNICAL DATA:

Model No VT-3216 VT-3220 VT-3230 VT-3240

Power 16W 20W 30W 40W

Tubes 2*8W UV Tubes 2*10W UV Tubes 2*15W UV Tubes 2*20W UV Tubes

Coverage Area 50m² 80m² 100m² 150m²

Size 354x93.5x280mm 397x93.5x280mm 502x93.5x280mm 655x93.5x280mm

Lamp Life Up to 80,000 Hours Up to 80,000 Hours Up to 80,000 Hours Up to 80,000 Hours

Input Power AC 220-240V, 50/60 Hz

Produkt Specifikationer

Mærke:	V-TAC
Kategori:	Insektfjerner
Model:	VT-3240

Har du brug for hjælp?

Hvis du har brug for hjælp til V-TAC VT-3240 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Insektfjerner V-TAC Manualer

V-TAC VT-3240 Manual

12 August 2024

V-TAC VT-3215 Manual

11 August 2024

Insektfjerner Manualer

Nyeste Insektfjerner Manualer

7 Juni 2025

4 Juni 2025

3 Juni 2025

27 Januar 2025

Noveen IKN1080 Manual

26 Januar 2025

26 Januar 2025

26 Januar 2025

26 Januar 2025

26 Januar 2025

26 Januar 2025