Vaddio IR Manual

Vaddio Fjernbetjening IR

Læs gratis den danske manual til Vaddio IR (3 sider) i kategorien Fjernbetjening. Denne vejledning er vurderet som hjælpsom af 47 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 24 anmeldelser. Har du et spørgsmål om Vaddio IR, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/3

Document Number 411-0058-41 Rev A – August 2022

User Guide for the

Vaddio IR Remote Controller

August 2022

998-2105-000 (Worldwide)

Installing the Batteries

The remote uses two AAA batteries.

1. Remove the cover from the back of the remote. You may need to press down on the

upper edge while sliding it off.

2. Install the batteries as shown in the diagram in the battery opening.

3. Slide and snap the cover back into place.

Tips for Using the Remote

Presets: The remote provides access to camera presets. Your camera’s web interface may

provide access to additional camera presets.

Camera selection: The remote has three IR channels, so it can control up to three

cameras independently. Check your camera’s manual for information on setting it as

camera 1, camera 2, or camera 3. By default, Vaddio cameras respond as camera 1

Troubleshooting tip: If the camera does not respond to the remote, press the Camera 1 button and try

again. If that doesn’t fix the problem, try the other camera selection buttons.

Auto-framing cameras: Auto-framing pauses when you press any button that affects the shot (arrows,

home, zoom, presets).

IR Remote Controller Quick Reference

The remote may have controls for capabilities that your camera does not have. Some

buttons behave in different ways depending on the camera’s capabilities.

Power button and indicator – Set the camera to standby mode, or

return to full-power mode.

Arrow buttons – Pan and tilt.

Home button – Function depends on the model of camera. For Auto-

framing cameras, press to resume auto-framing.

Network button – Display the camera's IP address on the video

output(s).

Backlight button – Adjusts for excess light behind the camera’s

subject.

Mute button – Mute connected or built-in microphone(s).

Volume +/– button – Increase or decrease the volume from the

connected or built-in speaker.

Focus +/– buttons – Adjust the focal distance in or out, when Manual

focus mode is selected.

Zoom +/– button– Increase or decrease the zoom.

Focus Auto/Man buttons – Select automatic or manual focus.

Pan Dir buttons – Set pan direction relative to the person using the

remote. Std is from the camera’s perspective. Rev is from the

perspective of a person facing the camera.

Set, Clr, and Preset buttons – Set, clear, or select preset shots.

User Guide for the Vaddio IR Remote Controller

Produkt Specifikationer

Mærke:	Vaddio
Kategori:	Fjernbetjening
Model:	IR
Bredde:	51 mm
Dybde:	25 mm
Højde:	168 mm
Vægt:	200 g
Antal pr. pakke:	1 stk
Produktfarve:	Sort
Indbygget skærm:	Ingen
Batteriteknologi:	Alkaline
Batterier inkluderet:	Ja
Knapper med baggrundsbelysning:	Ingen
Batteritype:	AAA
Antal understøttede batterier:	2
Bæredygtighedscertifikater:	CE, Federal Communications Commission (FCC), Trade Agreements Act (TAA)
Grænseflade:	IR trådløs
Indbygget batteri:	Ingen
Kompatible produkter:	all Vaddio IR cameras and Sony PTZ camera model
Mærke kompatibilitet:	Vaddio
Indgangstype:	Tryk på knapper
Maks. rækkevidde:	- m