Vaddio Quick-Connect 4 Manual

Vaddio Støvsuger Quick-Connect 4

Læs gratis den danske manual til Vaddio Quick-Connect 4 (8 sider) i kategorien Støvsuger. Denne vejledning er vurderet som hjælpsom af 17 personer og har en gennemsnitlig bedømmelse på 4.1 stjerner ud af 9 anmeldelser. Har du et spørgsmål om Vaddio Quick-Connect 4, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/8
Installation and User Guide
Camera and Electronic Products for Integrators
Vaddio Quick-Connect 4 - Document 341-256-1 Rev C
Quick-Connect™ 4
Video, Power and Control Wiring Center
INTRODUCTION
simplifies Operator and Presenter camera systems using the Vaddio EZCamera™
Cabling standard. The Quick-Connect 4 can accommodate up to four separate
Vaddio PTZ cameras, combining and consolidating four Vaddio Quick-Connect
Boxes, four PowerRite™ power supplies and four EZCamera Control Adapters used
with the EZCamera cable system.
Each camera port has an individual 18VDC supply to power a single PTZ camera.
Power is provided to the camera and S-Video and Composite video are both
returned to the Quick-Connect 4 on the same single Cat. 5 cable for Power/Video.
Individual control ports are supplied for camera control systems like the
ProductionVIEW™ and camera control daisy chaining is accommodated through the
first camera control port as well.
Control inputs are either DB-9 or RJ-45 and control outputs are RJ-45, which
connect easily with all Vaddio WallVIEW™, CeilingVIEW™, EZCamera and
HideAway series cameras.
INTENDED USE
Before operating the Vaddio Quick-Connect 4, please read the entire manual
thoroughly. The wiring system was designed, built and tested for use indoors.
unit and/or create a potentially unsafe operating condition. Use only the Vaddio
provided power supply.
SAVE THESE
INSTRUCTIONS
The information contained in this manual will help you install and operate your
Vaddio Quick-Connect 4. For reference, Vaddio keeps copies of Specifications,
Installation and User Guides and most pertinent product drawings for the Vaddio
product line on the website. These documents can be downloaded from
www.vaddio.com
free of charge.
IMPORTANT
SAFEGUARDS
Read and understand all instructions before using. Do not operate the device if it
has been dropped or damaged. In this case, a Vaddio technician must examine the
product before operating. To reduce the risk of electric shock, do not immerse in
water or other liquids and avoid extremely humid conditions.
Figure 1:
Vaddio Quick-Connect 4
Video, Power and Control
Wiring Center
Front Panel (above) and
Back Panel (below) shown
Quick-Connect 4
Vaddio Quick-Connect 4 - Document 341-256-1 Rev C
Page 2 of 8
UNPACKING
Carefully remove the device and all of the parts from the packaging.
Unpack and identify the following parts:
• One (1) Quick-Connect 4 Wiring Center (rack mount)
• One (1) 18VDC, 5.5Amp, 100W PowerRite Power Supply
• Installation and User Guide (341-256-1)
INSTALLATION
The Quick-Connect 4 was specifically designed for simplifying the installation of
camera systems using the Vaddio Cat. 5 cabling scheme for distribution of Video
(both S-Video and Composite video) and Power on the same Cat. 5 cable with
Control handled on a second Cat. 5 cable which adheres to both the Sony and
Canon Daisy chain wiring convention for control of multiple cameras with a single
control port. Below is a list of compatible Vaddio Camera Systems using the
Vaddio wiring standard.
Compatible
Camera
Systems
The Quick-Connect 4 is compatible with the following Vaddio cameras and
Camera Systems:
• Vaddio WallVIEW 100
• Vaddio WallVIEW 70
• Vaddio WallVIEW 50i
• Vaddio CeilingVIEW 70 PTZ
• Vaddio CeilingVIEW 70 PTZ HideAway*
• Vaddio CeilingVIEW 50iR PTZ
• Vaddio WallVIEW 50i PTZ HideAway*
• EZCamera PTZ Series Camera Kit (Camera, Cat. 5 Shoe and Remote)
• Vaddio Model 100 PTZ
• Vaddio Model 70 PTZ
• Vaddio Model 50 PTZ
• Vaddio Model 50iR PTZ
*Note: Due to the power requirements for proper operation, the Quick-Connect 4 can supply
power to only two (2) of the HideAway products (CeilingVIEW 70 PTZ HideAway and WallVIEW 50i
PTZ HideAway) at any given time.
Controls, Inputs
and Outputs
(Camera 1)
Figure 2: Back Panel Connections
A) Power Input (18V, +center, 5.5A) Supports up to Four (4) PTZ Cameras
B) Video/Power Connection – Carries Power to the camera and returns S-Video and
Composite Video to the Quick-Connect 4
C) S-Video Output of Camera on 4-pin mini din
D) Composite Video Output of Camera on BNC
E) Control Through Output Port to Camera (RS-232 on Cat. 5 cable)
F) Control Through Input Port from Controller (RS-232 on Cat. 5)
G) Control Through Input Port from Controller (RS-232 on DB-9)
Use only the power supply provided with the Quick-Connect 4 Wiring
Center. Use of any unauthorized power supplies will void any and all
warranties.
A
B
C
D E
F
G

Produkt Specifikationer

Mærke: Vaddio
Kategori: Støvsuger
Model: Quick-Connect 4

Har du brug for hjælp?

Hvis du har brug for hjælp til Vaddio Quick-Connect 4 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Støvsuger Vaddio Manualer

Vaddio

Vaddio Quick-Connect 4 Manual

27 Marts 2025

Støvsuger Manualer

Nyeste Støvsuger Manualer

Einhell

Einhell TE-AV 18/15 Li C Manual

22 August 2025
Philips

Philips Triathlon HR6834 Manual

22 August 2025
Scheppach

Scheppach SprayVac20 Manual

22 August 2025
Vacmaster

Vacmaster VH105 0101 Manual

22 August 2025
Dirt Devil

Dirt Devil DD2504 Manual

22 August 2025
Vacmaster

Vacmaster Professional VJH1612PF 0202 Manual

22 August 2025
Scheppach

Scheppach NTS20 Manual

22 August 2025
Hoover

Hoover HandiVac 7.2 Manual

22 August 2025
Dyson

Dyson Cinetic Big Ball Animal+ Manual

22 August 2025
Nedis

Nedis VCWI230WT Manual

22 August 2025