VAIS SoundLinQ2 SL2iC Manual

VAIS Ikke kategoriseret SoundLinQ2 SL2iC

Læs gratis den danske manual til VAIS SoundLinQ2 SL2iC (19 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 25 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 13 anmeldelser. Har du et spørgsmål om VAIS SoundLinQ2 SL2iC, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/19

iPod Out and iPod Video Out

interface

Owner’s Manual

Model :SL2iC

Model :SL2iCModel :SL2iC

VAIS

AIS

VAIS

www.vaistech.com

iPod touch 2nd generation

iPod touch 3rd generation

iPod touch 4th generation

iPhone 4

iPhone 3G

iPhone 3GS

iPad

iOS 4.0 and up

iOS 4.2 and up

Unit compatibility

DO NOT DISASSEMBLE OR ALTER

Doing so may result in an accident, fire or electric shock.

Do not block your view

Do not mount product or any added audio and/or video equipment where it can block your view through the windshield or

your view of dashboard indicators and displays.

Do not block the airbag

Do not mount product or any added audio and/or video equipment where it can obstruct the operation of the safety device

such as the airbag.

Distraction warning

Do not let product or any added audio and/or video equipment to distract you while you are driving.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL

DO NOT SPLICE INTO ELECTRICAL CABLES

Never cut away cable insulation to supply power to other equipment. Doing so will exceed the current carrying capacity of

the wire and result in fire or electric shock .

DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS

Cables or wiring that obstruct or get caught on the places such as the steering wheel, shift lever, brake pedals, etc. can be

extremely hazardous.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST

Moisture or dust may result in product failure.

HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS

The wiring and installation of this product requires special technical skills and experience.

USE ONLY SPECIFIED ACCESSORY PARTS

Use of other than specified parts may damage product internally.

FOLLOW THE OPERATIONAL AND INSTALLATION MANUALS.

YOU SHOULD READ AND FAMILIARIZE YOURSELF THOROUGHLY WITH THE FOLLOWING INFORMATION PRIOR

TO INSTALLING AND USING THIS UNIT. IN ADDITION, YOU MUST CAREFULLY READ AND FOLLOW THE

INSTALLATION SCHEMATICS/INSTRUCTIONS FOR THE PRODUCT AND THE VEHICLE IN WHICH IT IS BEING

INSTALLED. FAILURE TO FOLLOW INSTALLATION INSTRUCTIONS MAY DAMAGE THE PRODUCT AND THE

VEHICLE, WILL VOID THE PRODUCT WARRANTY, MAY VOID THE VEHICLE WARRANTY

CHECK YOUR LOCAL LAWS

Some States/Provinces or other governmental jurisdictions (such as cities) may have laws that prohibit the operation of a

video screen within the sight of the Driver. If you have purchased such a product, you should use the product only in

locations where it is legal to do so, and if you do use the product, set up the screen so it is only visible to passengers.

TROUBLESHOOTING

Should this product fail to operate properly, please contact your Dealer or our Customer Service Department at

support@vaistech.com.

Before starting any installation work , you must wait 90 seconds after turning the ignition switch to the LOCK position and disconnecting the negative (-) terminal

from the battery. The supplemental restraint system (airbag) is equipped with a backup power source. If installation work is started less 90 seconds after

disconnection of the negative (-)battery terminal, the SRS may deploy. When the negative (-) terminal cable is disconnected from the battery the clock and audio

systems memory will be erased. Before starting installation work make a record of the clock and audio systems memory settings. When installation is complete,

reset the clock and audio systems to their previous settings . Power tilt, power telescopic steering column, front power seats, power mirrors, and power shoulder

belt anchorage are equipped with a memory function .The rear power seat is not equipped with a memory function. e and they can make a record of the memory

contents, rear power seat is not equipped with the memory function. When installation is complete, it is necessary to readjust the features to their previous settings