Valco Baby Rebel Q Manual


Læs gratis den danske manual til Valco Baby Rebel Q (8 sider) i kategorien Klapvogn. Denne vejledning er vurderet som hjælpsom af 36 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 18.5 anmeldelser. Har du et spørgsmål om Valco Baby Rebel Q, eller vil du spørge andre brugere om produktet?

Side 1/8
Thank you for purchasing a quality VALCO BABY product. Please read and follow the instructions outlined in
this guide carefully. Familiarise yourself with the construction and safety features; be sure that you understand
all the warnings and safety guidelines before use.
Retain this guide in a safe place for future reference.
PRODUCT REFERENCE GUIDE
Due to our policy of continuous product development, this product is
constantly evolving. It is possible that some features or procedures outlined
here have changed since this document was written.
If you are unsure of any procedure shown here, please contact us via the web
at info@valco.com.au to obtain the most up to date information before use.
Include the batch number, which can be found on a sticker on the frame.
All pictures and diagrams herein are provided for illustration purposes only.
Actual product, colour or fabric may vary. VALCO BABY reserves the right
to modify or alter any specication or colour without notice or obligation to
modify any product previously purchased
REBEL Q STROLLER
WITH OPTIONAL
BASSINET ACCESSORY
FURTHER INFORMATION
valcobaby.com.au
© Copyright VB 2014
vs270214
Find us on:
ASSEMBLY
OPENING YOUR STROLLER
FIGURE A
1. Remove the stroller from the carton and dispose
of all packaging responsibly. The front wheels, rear
wheels, seat, bumper bar and hood all need to be
installed prior to use
2. Lay the stroller frame at on the ground with the
handle facing upwards. Release the frame lock if
engaged (see Diagram Q)
3. Lift the handle upward to a vertical position. You
will feel the chassis unfolding as you lift.
FIGURE B
4. Continue to lift the handle until you feel the
chassis lock into the open position.
IMPORTANT WARNING: ALWAYS TEST THAT ALL
LATCHES ARE SECURELY ENGAGED BEFORE USE.
INSTALLING/REMOVING THE WHEELS
FIGURE C - REAR WHEELS
5. Pressing on the axle release button, insert the
axle through the outside of the metal hub and
through the nylon brake cog.
IMPORTANT: INSERT THROUGH OUTSIDE OF THE
WHEEL - THE SIDE WHICH DOES NOT HAVE THE
BRAKE COG SPROCKETS
6. While pressing the axle release button (6), insert
the wheel axle into the wheel housing of the frame
at the rear of the stroller chassis.
7. Keeping the axle release button depressed, insert
the wheel as far as it will go into the channel.
Release the button and pull the wheel slightly
back toward you to ensuring that it has locked
securely into place.
8. Repeat this procedure for the other wheel.
9. To remove a rear wheel, rmly grasp the wheel
spokes while pressing the axle release button.
Gently pull the wheel free of the wheel housing.
FIGURE D - FRONT WHEELS
10. Line each front wheel pin (10) with the
corresponding front wheel housing (11).
11. Insert wheel pin into the wheel housing and push
it up until it clicks into place.
12. To remove the front wheel, rmly grasp the wheel
while pressing the wheel release button (13) and
gently pull the wheel free of the wheel housing
PRESS
6
A
B
C
Outside
wheel hub
Axle button
5
click
10
11
13
D


Produkt Specifikationer

Mærke: Valco Baby
Kategori: Klapvogn
Model: Rebel Q

Har du brug for hjælp?

Hvis du har brug for hjælp til Valco Baby Rebel Q stil et spørgsmål nedenfor, og andre brugere vil svare dig