Ansmann Powerline 5 LCD Manual

Ansmann Batterioplader Powerline 5 LCD

Læs gratis den danske manual til Ansmann Powerline 5 LCD (42 sider) i kategorien Batterioplader. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Ansmann Powerline 5 LCD, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/42



OPERATING INSTRUCTIONS

BEDIENUNGSANLEITUNG

MANUEL DʼUTILISATION



ИНСТРУКЦИЯ

MANUALE DʼISTRUZIONE

HASZN

ÁLATI UTASÍTÁS

INSTRUCCIONES DE MANEJO



LIETOŠANAS INSTRUKC

İJA



LATAUSLAITE

INSTRUKTIONSMANUAL



INSTRUKTION FOR BRUG



GEBRUIKSAANWIJZING



ZASTOSOWANIE



NÁVOD K POUŽITÍ



KASUTUSJUHIS



NÁVOD NA POUŽITIE



NAVODILA ZA UPORABO

ZA POLNILNIK



INSTRUCTIUNI DE UTILIZARE



OΔΗΓΊΕΣ ΛΕΙΤΟΥΡΓΊΑΣ ΤΟΥ

POWERLINE 5 LCD



OPERATING INSTRUCTIONS POWERLINE 5 LCD

Please read the operating instructions before use!

USE OF THE CHARGER

Charger with LCD Display and discharge function for 1-4 NiCD/NiMH batteries of the sizes Micro (AAA); Mignon (AA);

Baby (C); Mono (D) and 1-2 9V block.

ATTENTION

Use only with NiCD/NiMH cells. Non rechargeable batteries or other types could cause an explosion!

• Do not attempt to charge Alkaline batteries or other types of primary batteries • Do not dispose of batteries in fire as

the battery may explode, leak or catch fire

FEATURES

Separate charging processes for each inserted cell; Automatic start of charging at contact with the cell; NiCD as well as

NIMH cells can be charged at the same time; Microprocessor controlled charging for cylindrical cells; Automatic switch-

over to trickle charging for cylindrical cells; Discharging option for cylindrical cells; Faulty cell detection for cylindrical

cells

Display for cylindrical cells (1):

LED flashing red: charging

LED blinking (fast) red: faulty cell

LED flashing yellow: discharging

LED flashing green: ready /trickle charge

Display for 9V block (2):

LED flashing red: charging

LCD Display for cylindrical cells (3):

Additional information about the charging status and about the capacity level can be seen. (see drawing).

In rotation the charging status (charging or discharging) will be shown. Additionally the capacity of the inserted cells will

be shown in 25% steps for around 3 seconds. “OK” means end of charge / trickle charge; “BAD” means faulty cell.

Discharge button (4):

Press this button (PRESS) for approx. 3 seconds to start the discharge function for the cylindrical cells.

SAFETY INSTRUCTIONS:

Keep the charger in a dry place (indoor or in-vehicle use only) • In order to avoid the risk of fire and / or electrical

shock, the charger must be protected against high humidity and water • Ensure that the ventilation slots are kept free,

Produkt Specifikationer

Mærke:	Ansmann
Kategori:	Batterioplader
Model:	Powerline 5 LCD
Type:	Indendørs batterioplader
Produktfarve:	Sølv
Batterispænding:	9 V
Indbygget skærm:	Ja
Antal understøttede batterier:	6
Indgangsspænding:	- V
Indgangsfrekvens:	- Hz
Kompatible batteristørrelser:	AA, AAA, C,D