Vaxcel Burnaby C0308 Manual

Vaxcel Lys Burnaby C0308

Læs gratis den danske manual til Vaxcel Burnaby C0308 (2 sider) i kategorien Lys. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Vaxcel Burnaby C0308, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Hex Nut (F)

ASSEMBLY AND INSTALLATION

INSTRUCTIONS

NOTES: 1. Before installing, consult local electrical codes for wiring and grounding requirements.

2. Read and save these instructions.

C0258 / C0308

Hardware Package (included):

WARNING:

TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF

POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.

Turn off the power at fuse or circuit box

Installation Steps

Canopy

Bolt Nut (D)

Threaded Pipe

Mounting Screw (B) Wire Connector (C) Bolt Nut (D)

Mounting Plate Unit (A)

House Ground Wire

Fixture Ground Wire

Fixture Mounting Screw

Wire Connector (C)

Mounting Plate Unit (A)

Green Ground Screw

Mounting Screw (B)

Outlet Box

Page 1 / 2

240222

Max. 60W Medium Base bulb

(not included)

Socket

Coupling

Tube

Hex Nut (F)

Metal Pad (G)

Long Threaded Pipe (E)

Decorative Cup (H)

Finial (I)

Acrylic Diffuser

Frosted Side

Bracket

Linen Shade

Hex Nut (F)

Metal Pad (G)Long Threaded Pipe (E) Decorative Cup (H) Finial (I)

. Attach the mounting plate unit (A) to the outlet box by

using two mounting screws (B).

Thread the fixture wire through the tube and the canopy.

3. Attach one end of the tube to the canopy, then connect the other

end to the threaded pipe of the fixture.

4. Install 4 x 60W Max. medium base bulbs (not included).

See relamping label at socket area or packaging for

maximum wattage allowed.

5. Attach the long threaded pipe

(E)

to coupling,

then secure the preinstalled hex nut

(F)

Attach the hex nut

(F)

and the metal pad

(G)

the long threaded pipe

(E)

, slip the acrylic diffuser

and decorative cap

(H)

up through the long

threaded pipe

(E)

, then secure them with the

finial

(I)

NOTE: The depth of the lower hex nut (F) and

the metal pad (G) in long threaded pipe may

need to be adjusted to properly fit the acrylic

diffuser. The acrylic diffuser should be flatly

laid on three brackets, and the frosted side of

the acrylic diffuser should be faced down.

Produkt Specifikationer

Mærke:	Vaxcel
Kategori:	Lys
Model:	Burnaby C0308

Har du brug for hjælp?

Hvis du har brug for hjælp til Vaxcel Burnaby C0308 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Lys Vaxcel Manualer

Vaxcel Estelle P0228 Manual

7 Januar 2026

Vaxcel Akron W0285 Manual

6 Januar 2026

Vaxcel Monticello P0443 Manual

6 Januar 2026

Vaxcel Vine VL38841 Manual

6 Januar 2026

Vaxcel Harwich OD21506 Manual

6 Januar 2026

Vaxcel L0004 Manual

6 Januar 2026

Vaxcel Standford WL35121 Manual

6 Januar 2026

Vaxcel Orbit C0194 Manual

5 Januar 2026

Vaxcel Vermont W0406 Manual

5 Januar 2026

Vaxcel VL55704 Manual

5 Januar 2026

Lys Manualer

Nyeste Lys Manualer

Chauvet COLORdash Par-H18XIP Manual

7 Januar 2026

WAC Lighting 6401 Manual

7 Januar 2026

WAC Lighting 2052 Manual

7 Januar 2026

NightStick XPR-5590 Manual

7 Januar 2026

WAC Lighting FM-306-9CS Manual

6 Januar 2026

WAC Lighting FM-21728 Manual

6 Januar 2026

WAC Lighting 1041 Manual

6 Januar 2026

WAC Lighting 7062 Manual

6 Januar 2026

WAC Lighting FM-306MS Manual

6 Januar 2026

WAC Lighting FM-73142 Manual

6 Januar 2026