
1. Attach the crossbar unit (A) to the outlet box with two
mounting screws (B).
2. Pull out the source wires from the outlet box.
Make wire connections using wire connectors (C)
as follows:
• Connect the hot wire (black insulation) from the
fixture to the black wire from the power source.
• Connect the neutral wire (white insulation) from
the fixture to the white wire from the power source.
• Attach the fixture ground wire (bare wire) to the
crossbar unit (A) with green ground screw, then
depending on local code, connect it to the house
ground wire with the wire connector (C).
Carefully put all of the wires back into the outlet box.
3. Attach the ceiling pan to the crossbar unit (A) by inserting
the two screws, then secure it with the bolt nuts (D) .
4. Install the bulbs (not included). See relamping label at
socket area or packaging for maximum wattage allowed.
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
T0665
Hardware Package (included):
Turn off the power at fuse or circuit box.
Installation Steps
WARNING
TO TO SHUT OFF
Mounting Screw (B)
Washer (E) Hex Nut (G)
Threaded Pipe (H) Cap (I) Metal Pad (J)
Crossbar Unit (A) Wire Connector (C)
Finial (F)Bolt Nut (D)
Turn off the power at fuse or circuit box.
Outlet Box
House Ground Wire
Fixture Ground Wire
Wire Connector (C)
Screw
Ceiling Pan
Socket
Coupling
Hex Nut (G)
Threaded Pipe (H)
Frame
Cap (I)
Finial (F)
Crossbar Unit (A)
Green Ground Screw
Mounting Screw (B)
Lock Nut
Max.60W Type A Bulb
(not included)
Washer (E)
Bolt Nut (D)
Hex Nut (G)
Metal Pad (J)
W
WARNING: Turn off the main power at circuit breaker before installing fixture.
AVERTISSEMENT: Coupez la source d’alimentation principale au panneau
central de disjoncteurs avant d’installer le luminaire.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. Read
and save these instructions.
230824
Page 1 / 2