Vaxcel Franklin T0411 Manual

Vaxcel Ikke kategoriseret Franklin T0411

Læs gratis den danske manual til Vaxcel Franklin T0411 (3 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 4 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 2.5 anmeldelser. Har du et spørgsmål om Vaxcel Franklin T0411, eller vil du spørge andre brugere om produktet?

Side 1/3
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
T0347
Hardware Package (included):
IMPORTANT:
Turn off the power at fuse or circuit box
Installation Steps
1. Attach the cross bar unit (A) to the outlet box by using two mounting screws (B). Adjust the length of the preinstalled
fixture mounting screws if necessary.
Note: Make sure that the fixture mounting screws are lined up horizontally to make the fixture level.
Mounting Screw (B)
Wire Connector (C) Bolt Nut (D)
Cross Bar Unit (A)
Rubber Pad (E)
Max.100W Type A Bulb
(not included)
Backplate
Photocell
Fixture
Shade
Socket Ring
Bolt Nut (D)
Rubber Pad (H)
Wire Connector (C)
House Ground Wire
Outlet Box
Mounting Screw (B)
Fixture Mounting Screw
Green Ground Screw
Cross Bar Unit (A)
Fixture Wire
Fixture Ground Wire
The sensor has an excellent photocell function
to enable the light to turn on at dusk and off at
dawn automatically.
Page 1 / 3
230327
W
WARNING: Turn off the main power at circuit breaker before installing fixture.
AVERTISSEMENT: Coupez la source d’alimentation principale au panneau
central de disjoncteurs avant d’installer le luminaire.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. READ
AND SAVE THESE INSTRUCTIONS.


Produkt Specifikationer

Mærke: Vaxcel
Kategori: Ikke kategoriseret
Model: Franklin T0411

Har du brug for hjælp?

Hvis du har brug for hjælp til Vaxcel Franklin T0411 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Vaxcel Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer