ASSEMBLY AND INSTALLATION
INSTRUCTIONS
1. Attach the mounting strap unit (A) to the outlet box by using two
mounting screws (B).
2. Choose the length of the chain (G) you need, then weave the fixture
wire and the fixture ground wire through the chain (G), collar (E)
and canopy (D).
3. Connect one end of the chain (G) with the loop by using a quick link (F).
4. Connect the other end of the chain (G) with the top loop by using
another quick link (F).
5. Thread the fixture wire and fixture ground wire through the top loop,
threaded pipe and mounting strap unit (A).
6. Hook the lamp with three fixtures and then adjust
the angle, finally lock the loop with quick link (F).
7. Pull out the outlet wires and house ground wire
from the outlet box. Make wire connections using
the wire connectors (C):
--The smooth wire (marked) from the fixture to
the black wire from the power source.
---The ridged wire (unmarked) from the fixture
to the white wire from the power source.
---Attach the fixture ground wire to the mounting
strap unit (C) with the green ground screw.
Then connect it to the house ground wire with a wire connector (C).
Carefully put the wires back into the outlet box.
Turn off the power at fuse or circuit
box.
Installation Steps
Page 1 / 2
231116
H0261
Mounting Strap Unit (A) Wire Connector (C)
Collar (E)
Mounting Screw (B)
Canopy (D)
Quick Link (F)
Chain (G)
Hardware Package(inculded):
WARNING:
TO
L SHOCK, BE SURE TO SHUT OFF
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. Read
and save these instructions.
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
Outlet Box
Housing Ground Wire
Wire Connector (C)
Fixture Wire
Fixture Ground Wire
Mounting Strap Unit (A)
Green Ground Screw
Mounting Screw (B)
Threaded Pipe
Hex Nut
Washer
Top Loop
Canopy (D）
Quick Link (F)
Quick Link (F)
Quick Link (F)
Collar (E)
Chain (G)
Loop
Tube
Loop
Max. 60W Candelabra
Base Bulb
(not included)
Fixture
