Vaxcel Hyannis OW37051 Manual

Vaxcel Ikke kategoriseret Hyannis OW37051

Læs gratis den danske manual til Vaxcel Hyannis OW37051 (2 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Vaxcel Hyannis OW37051, eller vil du spørge andre brugere om produktet?

Side 1/2
Page 1 / 2
230825
W
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
Hardware Package (included):
Mounting Screw (B) Wire Connector (C)
Bolt Nut (D)
Crossbar Unit (A)
OW37051BBZ / OW37051TB
WARNING: Turn off the main power at circuit breaker before installing fixture.
AVERTISSEMENT: Coupez la source d’alimentation principale au panneau
central de disjoncteurs avant d’installer le luminaire.
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. Read
and save these instructions.
1. Unscrew the two bolt nuts (D), remove the crossbar unit (A)
from the backplate.
2. Attach the crossbar unit (A) to the outlet box by using two mounting screws (B).
Adjust the length of the preinstalled headless screws if necessary.
Note: Make sure that the headless screws are lined up horizontally to
make the fixture level.
Turn off the power at fuse or circuit box
Installation Steps
Rubber Pad (E)
Wire Connector (C)
House Ground Wire
Outlet Box
Mounting Screw (B)
Green Ground Screw
Headless Screw
Crossbar Unit (A)
Fixture Wire
Fixture Ground Wire
Backplate
Bolt Nut (D)
Rubber Pad (E)
Handle
Screwdriver
Max. 60W Medium Base Bulb
(not included)
Bolt Nut
Socket
Frame
Fixture
Set Screw


Produkt Specifikationer

Mærke: Vaxcel
Kategori: Ikke kategoriseret
Model: Hyannis OW37051

Har du brug for hjælp?

Hvis du har brug for hjælp til Vaxcel Hyannis OW37051 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Vaxcel Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer