
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
Glass Shade
NOTE: 1. Before installing, consult local electrical codes for wiring and grounding requirements.
2. Read and save these instructions.
C0304
WARNING:
TO AVOID RISK OF ELECTRICAL SHOCK, BE SURE TO SHUT OFF
POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE.
Outlet Box
House Ground Wire
Wire Connector (C)
Fixture Mounting Screw
Mounting Strap Unit (A)
Green Ground Screw
Lock Nut
Mounting Screw (B)
Fixture Wire
Fixture Ground Wire
Bolt Nut (D)
Socket
Fixture
Socket Ring
Max. 60W Medium
Base Bulb (not included)
Page 1 / 2
231121
Turn on the power at fuse or circuit box
1.
Unscrew the bolt nuts (D), take out the mounting strap
unit (A) and then attach to the outlet box by using two
mounting screws (B).
2
. Pull out the source wires from the outlet box. Make wire
connections using wire connectors (C) as follows:
• Connect the hot wire (black insulation) from the fixture
to the black wire from the power source.
• Connect the neutral wire (white insulation) from the
fixture to the white wire from the power source.
• Attach the fixture ground wire (bare wire) to the mounting
strap unit (A) with green ground screw, then depending on
local code, connect it to the house ground wire with the
wire connector (C).
Carefully put all of the wires back into the outlet box.
3. Attach the fixture to the mounting
strap
unit (A) by inserting
the fixture mounting screws, then secure it with two bolt nuts (D).
4. Attach the glass shade to the socket carefully, then secure it with
the socket ring.
5
. Install 1 x 60W Max. medium base bulb (not included). See
relamping label at socket area or packaging for maximum
wattage allowed.
Turn off the power at fuse or circuit box
Installation Steps
Hardware Package (included):
Wire Connector (C)
Mounting Screw (B)
Mounting Strap Unit (A)
Bolt Nut (D)