Vaxcel Yosemite OW33483 Manual

Vaxcel Ikke kategoriseret Yosemite OW33483

Læs gratis den danske manual til Vaxcel Yosemite OW33483 (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Vaxcel Yosemite OW33483, eller vil du spørge andre brugere om produktet?

Side 1/1
Fixture
ASSEMBLY AND INSTALLATION
INSTRUCTIONS
WARNING:
TO AVOID RISK OF ELECTRIC SHOCK, BE SURE TO SHUT OFF
POWER WHILE INSTALLING OR SERVICING THIS FIXTURE.
NOTE: Before installing, consult local electrical codes for wiring and grounding requirements.
OW33483 / OW33583 / OW35083 / OW36983 / OW35683
Mounting Screw
Cross Bar
Green Grounding Screw
Wire Nut
Hex Nut
Wall Box
Grounding Wire
Set Screw
Fixture Wire
House Grounding Wire
Wall Bracket
1. Attach the cross bar to the wall box by using 2 mounting screws.
2. Adjust the cross bar to horizontality, and secure the hex nut.
3. Make wire connections with wire nuts:
---Connect the black wire from xture to the black wire from power source.
---Connect the white wire from xture to the white wire from power source.
---Attach the grounding wire and the house grounding wire to the cross
bar with a green grounding screw.
Carefully tuck wires back into the wall box.
4. Attach the xture to the cross bar, align the holes of the wall bracket with
the holes of cross bar, and secure the xture rmly with the set screws.
5.Install a bulb. (Please do not exceed the maximum capacity, which is
recommended on the package.)
6.Turn on the power at fuse or circuit box.


Produkt Specifikationer

Mærke: Vaxcel
Kategori: Ikke kategoriseret
Model: Yosemite OW33483

Har du brug for hjælp?

Hvis du har brug for hjælp til Vaxcel Yosemite OW33483 stil et spørgsmål nedenfor, og andre brugere vil svare dig