VDO Dayton CR 3100 Manual

VDO Dayton Bilradio CR 3100

Læs gratis den danske manual til VDO Dayton CR 3100 (22 sider) i kategorien Bilradio. Denne vejledning er vurderet som hjælpsom af 52 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 26.5 anmeldelser. Har du et spørgsmål om VDO Dayton CR 3100, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/22
Installation
Preparation ....................................................................................................................................................................... 2
Mounting ........................................................................................................................................................................... 5
Security ................................................................................................................................................................................ 6
Operation
Function Operation ...................................................................................................................................................... 7
Audio .................................................................................................................................................................................... 7
Radio – Tuning to a station ..................................................................................................................................... 9
Radio Data System (RDS) on FM ........................................................................................................................... 11
RDS Memory store ........................................................................................................................................................ 12
Cassette Player* .............................................................................................................................................................. 13
CD player* and CD changer (if connected) ................................................................................................... 15
Special Functions ........................................................................................................................................................... 18
Display Options ............................................................................................................................................................... 19
Initial Settings .................................................................................................................................................................. 20
Notes and Troubleshooting .................................................................................................................................... 22
Guarantee and Service ............................................................................................................................................... 68
Important note:
This product has been designed and constructed in accordance with applicable Safety
Regulations. Please read the instruction manual carefully and use the product only as intended.
2
* Depending on version Complies with 21 CFR 1040.10
CONTENTS
PREPARATION
USER INSTRUCTIONS English
INSTALLATION
For cars supplied with standard ISO connectors, you can directly mount the car radio (see
‘MOUNTING’). For cars with different connecting standards, your dealer can provide specific
adapter cables for a problem free installation (see table on separate installation card).
You can prepare the connection yourself (see ‘PREPARATION’).
Ensure all cables are installed so that they cannot be damaged by sharp edges or moving parts.
The set must be connected to a 12 V car battery with the negative terminal to earth (car chassis).
Installation in vehicles not fulfilling these requirements could result in malfunction, damage
or fire!
• To prevent short-circuiting, disconnect the negative car battery terminal until the set has
been mounted and connected (fig. 1. from separate installation card).
GB
3
CONNECTOR A (fig. 2)
■POWER SUPPLY CONNECTIONS
•Brown wire A8: Connect to an earthing point on the car body.
•Red wire A7: Connect to a 12 V supply. This is the main power supply.permanent
Ensure this connection can handle a current of 10 A.
•Yellow/red wire A4: Connect to the switched 12 V supply of the car ignition.
This connection set up will enable you to make full use of the ON/OFF LOGIC function of this
set limiting the use of the set to 1 hour after removal of the ignition key. If this feature does
not appear to be functioning as expected you may require an adapter cable. See reverse of
installation card.
■OPTIONAL CONNECTIONS FOR CONNECTOR A
ELECTRONIC / MOTOR AERIAL
•Connect the supply for an electronic aerial or the control wire for the relay of an automatic
motor aerial to pin A5. Use the small contact supplied.
Do not use this connection point for direct supply of the aerial motor!
PILOT LIGHT
When the car headlights are switched on, the backlight to the power key remains illuminated
(even when the radio is switched off). With this connection when the set is on, the brightness
of the display is reduced.
•Connect pin A6 to the dashboard illumination wiring of your car.
Use the small contact supplied.
CONNECTOR B for loudspeakers 4 x l(fig. 3)
-Only use loudspeakers that have an impedance of 4 ohms.
-Do not connect any of the loudspeaker wire to earth!
-Do not connect a booster/amplifier directly to the loudspeaker outputs!
-Do not connect loudspeakers via an external fader!
•Blue wire B1: Connect to Rear Right speaker (+).
•Blue/black wire B2: Connect to Rear Right speaker (–).
•Grey wire B3: Connect to Front Right speaker (+).
•Grey/black wire B4: Connect to Front Right speaker (–).
•Green wire B5: Connect to Front Left speaker (+).
•Green/black wire B6: Connect to Front Left speaker (–).
•White wire B7: Connect to Rear Left speaker (+).
•White/black wire B8: Connect to Rear Left speaker (–).
To check the loudspeaker connections keep the SOUND key pressed and switch on the set.
To cancel switch off the set.

Produkt Specifikationer

Mærke: VDO Dayton
Kategori: Bilradio
Model: CR 3100

Har du brug for hjælp?

Hvis du har brug for hjælp til VDO Dayton CR 3100 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Bilradio VDO Dayton Manualer

VDO Dayton

VDO Dayton cd 5206 x 24 v Manual

22 August 2024
VDO Dayton

VDO Dayton cd cr 2202 Manual

21 August 2024
VDO Dayton

VDO Dayton CD 4403 Manual

21 August 2024
VDO Dayton

VDO Dayton CD 2104 Manual

21 August 2024
VDO Dayton

VDO Dayton MR 4000 Manual

21 August 2024
VDO Dayton

VDO Dayton CD 2251 Manual

21 August 2024
VDO Dayton

VDO Dayton CD 441 Manual

21 August 2024
VDO Dayton

VDO Dayton CR 2252 Manual

21 August 2024
VDO Dayton

VDO Dayton cr 5206 x 24 v Manual

21 August 2024
VDO Dayton

VDO Dayton CD 1737 X Manual

20 August 2024

Bilradio Manualer

Nyeste Bilradio Manualer

Pioneer

Pioneer DEH-P2530R Manual

15 August 2025
Pioneer

Pioneer DVH-P430UB Manual

14 August 2025
Pioneer

Pioneer MVH-270DAB Manual

14 August 2025
Pioneer

Pioneer DEH-30MP Manual

14 August 2025
Pioneer

Pioneer DEH-P5630MP Manual

14 August 2025
Pioneer

Pioneer DEH-5000UB Manual

14 August 2025
Pioneer

Pioneer DEH-P6400R Manual

14 August 2025
Pioneer

Pioneer DEH-P5730MP Manual

14 August 2025
Pioneer

Pioneer DEH-1700UBG Manual

14 August 2025
Pioneer

Pioneer DEH-2820MP Manual

14 August 2025