Velbon ULTRA 555 Manual

Velbon Fotokamera med stativ ULTRA 555

Læs gratis den danske manual til Velbon ULTRA 555 (11 sider) i kategorien Fotokamera med stativ. Denne vejledning er vurderet som hjælpsom af 28 personer og har en gennemsnitlig bedømmelse på 4.4 stjerner ud af 14.5 anmeldelser. Har du et spørgsmål om Velbon ULTRA 555, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/11

Operating Manual

Identification of main parts

Thank you very much for choosing Velbon Tripod.

Please carefully read this manual before starting use so that you can handle this product correctly.

1563mm

60.47inch.

1288mm

50.71inch.

248mm

9.76inch.

124mm

4.88inch.

372mm

14.65inch.

30/27/24/21/18.2mm

1.18/1.08/0.94/0.83/0.72inch.

1480g

3.26lbs.

3000g

6.61lbs.

1558mm

61.34inch.

1312mm

51.65inch.

246mm

9.69inch.

132mm

5.20inch.

370mm

14.57inch.

27/24/21/18.2/15.4mm

1.08/0.94/0.83/0.72/0.61inch.

1307g

2.88lbs.

2500g

5.51lbs.

ULTRA 655(A)/ULTRA 555(A)

ULTRA 655(A)

SPECIFICATIONS

ULTRA 555(A)

※

The manufacturer reserves the right to change specification, design, and size without prior notice.

5 5

Lower column

(Detached elevator lower section)

＜Low angle position＞

Full extended height(Inc. EV)

Extended height(Excl. EV)

Elevator slide

Minimum height

Folded length

Leg diameters

Number of section

Weight

Suggested loading weight

Direct contact pipe

New development of the technology

enables to lock/unlock the pipes and

to extend/fold quickly by twisting

approximately a half of rotation.

Camera screw

Leg tip

Elevator stopper

Elevator

Leg adjusting grip

Leg angle

adjusting knob

Center end

ULTRA 655(A)/ULTRA 555(A)

Hold Rubber foot tightly and rotate it towards unlock

direction and feel 4 clicks. This means that each leg

section becomes loosen.

Extend legs till the end and twist them towards lock

direction firmly. When closing legs, do this procedure in

reverse order.

In order to adjust length of leg, hold Adjustment grip of

second leg and unlock by rotating it anti-clockwise. Then

extend leg and find desired length.

Then lock it by rotating leg by clockwise firmly.

While closing leg slowly whose position is

low-position(shown as above picture), Leg angle selector

slides towards left automatically making a click sound.

This position is semi low-position.

Lower part of Elevator which is divided is called Lower

column.

Remove Center end by turning anti-clockwise and screw it

into the part devided. This prevents dirt and so on.

Do not lose removed Lower column.

If closing leg further, Leg angle selector slides automati-

cally making a click sound. This makes standard position.

※

※ ※

※

Lock

Unlock

Extending along with

the groove till the end

Closing

Screw in

Center End

When changing panhead, tighten all the stoppers such as

Panning handle, Side tilting handle, Panning stopper and

Elevator stopper firmly.

Then turn the whole panhead anti-clockwise and detach it

from tripod. Other panheads such as ball socket head can

be set up.

Loosening Elevator stopper enables Elevator to go up and

down. When the desired position is found, tighten Elevator

stopper.

While operating Elevator, make sure to hold your

camera securely.

While closing legs, slide Leg angle selector towards right

completely until you hear click sound.

Then opening legs fully realizes low-position. While

Elevator stopper is tightened, turn lower part of Elevator

anti-clockwise.

Then Elevator is divided in two parts.

When Leg angle selector is slid by mistake, push

down cancel-buttun. Leg angle selector returns to

original position.

Click!

Tripod screw socket=UNIC1/4

Elevator stopper

(Tighten firmly)

Elevator stopper

Cancel-button

Leg angle selector

Split

Open the leg

Leg angle selector returns

towards left automatically

making sound of clicks.

Leg angle selector moves

towards left automatically

making a click sound.

When holding Rubber foot, do not soil

your hands. Do not pinch your fingers

and hands between Rubber foot and

legs.

When setting up your equipments on

tripod, make sure that strength of

leg-locking is good enough by

suppressing from top of the tripod.

Adjustment

Rubber foot

1.How to change panhead 2.How to use Elevator 3-1.How to adjust leg angle

3-2.How to adjust leg angle 3-3.How to adjust leg angle 4.Lower column

5.How to extend leg and lock How to adjust length of leg

Lower column

Remove

Back and forth

Operating Manual

Produkt Specifikationer

Mærke:	Velbon
Kategori:	Fotokamera med stativ
Model:	ULTRA 555

Har du brug for hjælp?

Hvis du har brug for hjælp til Velbon ULTRA 555 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Fotokamera med stativ Velbon Manualer

Velbon EX-447 Video Manual

5 Oktober 2024

Velbon Sherpa 5470D Manual

5 Oktober 2024

Velbon Sherpa E5300D Manual

23 September 2024

Velbon ULTRA VOXi L-A Manual

23 September 2024

Velbon DV-7000N Manual

20 September 2024

Velbon ULTRA 555 Manual

20 September 2024

Velbon Ultra 355 Manual

17 September 2024

Velbon PH157Q Manual

17 September 2024

Velbon EX-547 Video Manual

15 September 2024

Velbon FHD-53D Manual

22 August 2024

Fotokamera med stativ Manualer

Nyeste Fotokamera med stativ Manualer

Easypix GoXtreme Gimbal GX3 Manual

26 August 2024

Rollei Compact Traveler No 1 Carbon Manual

25 August 2024

Vizu VEXGIMBAL Manual

23 August 2024

Sony ACC-SHA Manual

4 Juli 2024