Velleman VTHD04 Manual

Velleman bore VTHD04

Læs gratis den danske manual til Velleman VTHD04 (18 sider) i kategorien bore. Denne vejledning er vurderet som hjælpsom af 20 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 10.5 anmeldelser. Har du et spørgsmål om Velleman VTHD04, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/18
VTHD04
HIGH-SPEED ELECTRIC DRILL & ENGRAVING SET
ELEKTRISCHE BOORMACHINE & GRAVEERSET
PERCEUSE ÉLECTRIQUE & JEU DE GRAVURE
TALADRO ELÉCTRICO DE ALTA VELOCIDAD & JUEGO DE GRABADO
ELEKTRISCHES BOHR- UND GRAVIERSET
PROFESJONALNA WIERTARKA ELEKTRYCZNA & ZESTAW DO
GRAWEROWANIA
BERBEQUIM ELÉCTRICO DE ALTA VELOCIDADE & KIT DE
GRAVAÇÃO
USER MANUAL 2
GEBRUIKERSHANDLEIDING 4
MODE D’EMPLOI 6
MANUAL DEL USUARIO 8
BEDIENUNGSANLEITUNG 10
INSTRUKCJA OBSŁUGI 12
MANUAL DO UTILIZADOR 14
.
VTHD04
V. 02 10/05/2016 2 ©Velleman nv –
USER MANUAL
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle
could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal
waste; it should be taken to a specialized company for recycling. This device should be returned
to your distributor or to a local recycling service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into
service. If the device was damaged in transit, do not install or use it and contact your dealer.
2. Safety Instructions
Keep the cord away from the moving parts of the machine.
Switch the machine off immediately if it jams and remove the plug from the mains.
Compare the max. number of revolutions for the accessories with the number of revolutions of the
device.
When you store the device, the engine must be switched off and all moving parts must have reached
a standstill.
Do not use collets with a piece of string or such attached to it.
Never engage the collet lock button while the device is in use.
Make sure the shaft diameter of the accessory matches that of the collet nut.
Secure the work piece with a clamping device. Always be careful when handling the device.
Keep your hands away from the work piece when using the drill.
Do not use the device in a damp or wet environment or near inflammable liquids or gases.
Always wear safety goggles and ear protection. Avoid wearing loose clothing or jewellery.
Inspect the power cord and the device before every use.
Keep the device away from children and unauthorized persons.
3. General Guidelines
Refer to the on the last pages of this manual. Velleman® Service and Quality Warranty
4. Contents
● ● ● ● 1x electric drill 10x grinder stone 2x diamond bit ● 3x connective post 8x cutting disc
● ● ● ● 4x polishing wheel 4x sanding band ● 2x drill bit 2x collet 1x wet stone ● 3x sanding paper
● 1x spanner
5. Mounting Accessories
Always remove the plug from the mains prior to assembly. Hold the collet lock button while unscrewing
the collet nut and screw the accessory in place. Hold the collet lock button while you are fastening the
collet nut. Do not operate the collet lock button while the device is still connected with the mains.
6. Operation
Switch on the device by engaging the -off switch. Set the desired speed with the speed dial. The on
engine can burn out if too high a load is used at low speed. Only put the device down when the engine
has stopped completely. Do not store the device in a dusty environment as dust particles may penetrate
the mechanics. Always wear safety goggles when using this device.
This device should be used at high speeds for: carving and drilling, working with glass, metals and
hardwood.
This device should be used at low speeds for: polishing, delicate work, most plastic materials.

Produkt Specifikationer

Mærke: Velleman
Kategori: bore
Model: VTHD04

Har du brug for hjælp?

Hvis du har brug for hjælp til Velleman VTHD04 stil et spørgsmål nedenfor, og andre brugere vil svare dig


bore Velleman Manualer

Velleman

Velleman VTHD0051 Manual

30 Juli 2024
Velleman

Velleman VTHD04 Manual

29 Juli 2024

bore Manualer

Nyeste bore Manualer

Einhell

Einhell BM-G1100 E Manual

14 Oktober 2024
Sun Joe

Sun Joe 24V-DDK-LTX-PNK Manual

14 Oktober 2024
DeWalt

DeWalt DWD450 Manual

14 Oktober 2024
Rupes

Rupes BH 252R Manual

13 Oktober 2024
Makita

Makita DHR263ZJ Manual

12 Oktober 2024
Makita

Makita HP2070 Manual

12 Oktober 2024
Makita

Makita DDA350RFJ Manual

7 Oktober 2024
Einhell

Einhell TE-ID 750/1 E Manual

7 Oktober 2024
Makita

Makita HP332D Manual

7 Oktober 2024
Makita

Makita M6501 Manual

6 Oktober 2024