Veloretti V1 Manual

Veloretti Cykel V1

Læs gratis den danske manual til Veloretti V1 (2 sider) i kategorien Cykel. Denne vejledning er vurderet som hjælpsom af 15 personer og har en gennemsnitlig bedømmelse på 3.6 stjerner ud af 8 anmeldelser. Har du et spørgsmål om Veloretti V1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Assembly Manual

Thank you and congratulations on your purchase of an original Veloretti. The following guide is to

assist with the setting up your bike. Please read this document carefully.

IN THE

IN THEIN THE BOX:

BOX:

BOX: BOX:

The bike has been carefully wrapped to ensure there will be no damage in transit. Start by

removing all cardboard, foam and cable ties and laying out all loose parts clearly.

The bicycle is already 85% assembled. All you need to do is complete a few simple assembly

steps. In just 10 minutes you can cycle through your city streets.

IMPO

IMP OIMP O RTAN

RTAN

RTANRTAN T:

T: T:

This manual contains important safety, performance and service information. Read it before you

take the first ride on your Veloretti, and keep it for reference. If you have any questions or do not

understand something, take responsibility for your safety and consult us at:

Tel: +31 20 7710282(0) -

Mail: info@veloretti.com!

Skype: veloretti

ASSEM

ASSEMASSEMBLY CHECKLIST:

BLY CHECKLIST:

BLY CHECKLIST: BLY CHECKLIST:

1 Front wheel & Fender

2 Handlebar

3 Pedals

4 Seat & Seat post

5 Reflector set

TOOLS:

TOOLS:TOOLS:

• Wrench set

• Allen key

• Scissor

If you need more information please see the assembly steps or video at:

http://veloretti.com/assembly/ If something is still not clear please call or email our customer

service. We are always there to help.

LET’S START:

LET’S START:LET’S START:

Step 1

Step 1Step 1

Take your new Veloretti out of the cardboard box and remove the protective cardboard carefully.

Cut the zip ties that hold the parts together.

Step 2

Step 2Step 2

Install the front fender on to the fork and use the chrome bottom brackets to get the fender in

line with the wheel that will be installed next. Put the front wheel into the front fork, align the

wheel proper and tighten the bolts.

Step 3

Step 3Step 3

Place the handlebar stem in the steer tube of the fork. Align the stem so that it is straight with

the front wheel and use an Allen key Additionally the handlebar to tighten it in the right position.

needs to be tightened into the right position with an Allen key. Never ride a bicycle with a loose

stem, handlebar or wheel as this may cause accidents. Please double check if the bolts are

tightened 100% securely.

Step 4

Step 4Step 4

Install the pedals by beginning to thread he right pedal into the right crank arm and turn the

pedal axle clockwise (this pedal is marked with an “R” on the axle). Once both left and right

pedal threads are engaged, use the no.15 wrench for final tightening.

Step 5

Step 5Step 5

Finally the seat post needs to be adjusted. A good starting point is to raise the saddle to about

hip- height and try if it is comfortable to you. When you have found the perfect position please

tighten it securely with an Allen key Please extra tighten the bolt under the saddle, as this . could

get loose after intensive use.

Step 6

Step 6Step 6

Almost there! Pump up your tires to the amount of pressure that you like best. A small nut must

inside the valve needs to be unscrewed to permit airflow. After the tire is inflated please tighten

the small nut again. We recommend putting enough air in your tires, as this will improve your ride

enormously.

Step 7

Step 7 Step 7

Double check if all the bolts are tight securely and if all components are undamaged. Finally,

please install the reflectors set in order meet the . supplied safety regulations

Step 7

Step 7Step 7

Congratulations you have made it! You are now ready to conquer the city streets.

If you like to share your first bike experience with us please use your

own

Instag

Insta gInsta g ram

ram

ramram and tag

us with #velor

#velor

#velor#veloretti

etti

ettietti We love to see you together with your new bike! Your picture will appear on

our website automatically.

Happy cycling! !

Produkt Specifikationer

Mærke:	Veloretti
Kategori:	Cykel
Model:	V1

Har du brug for hjælp?

Hvis du har brug for hjælp til Veloretti V1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Cykel Veloretti Manualer

Veloretti V1 Manual

1 Oktober 2024

Veloretti Maxi Manual

13 August 2024

Veloretti V4 Manual

26 Juli 2024

Cykel Manualer

Nyeste Cykel Manualer

Urban Glide Bike 120 Pro Manual

29 Juni 2025

Kinderkraft Tove Manual

24 Juni 2025

Coboc Iseo Manual

23 Juni 2025

Coboc Bristol DMT Manual

23 Juni 2025

Coboc Bristol TPZ Manual

23 Juni 2025

Nils Fun RB002 Manual

16 Juni 2025

Sun Baby Molto Strada Manual

9 Juni 2025

Sun Baby Evo 360 Manual

8 Juni 2025

Spirit Fitness CR1000ENT Manual

7 Juni 2025

Scott Solace eRIDE Manual

28 Marts 2025