Vemer Mini Time Manual

Vemer Ikke kategoriseret Mini Time

Læs gratis den danske manual til Vemer Mini Time (1 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 2 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 1.5 anmeldelser. Har du et spørgsmål om Vemer Mini Time, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/1

To configure the device using a smartphone, proceed as follows:

1. Start the and press the App “+” key

present on the Home page

2. Press the Bluetooth connection box and

select the Connect key

3. Find and select the “MINI TIME” device

in the list to connect to the timer

(the

green LED will start flashing quickly to

indicate that it has happened connection

between app and device).

Notes: all the Bluetooth devices detected

nearby are displayed: select the device to be

associated from the list. Each device is

identified by the product code (for example

VE798200) and by the serial number

(for example 12340003) and the name of the

model MINI TIME.

Warning: make sure that theMINI TIME is

mains powered, otherwise the Bluetooth

interface is not active and the device is not visible.

4. Confirm the double Bluetooth pairing notification received on your

phone by entering the password to pair the MINI TIME with your phone (if not

changed, the password is 123456) and wait for synchronization with the device.

5. After successfully completing the procedure, the app displays the initial page

of the selected MINI TIME.

From this page it is possible

a. Create new programs which will then be copied to the MINI TIME

b. Change the MINI TIME settings

c. View the parameters and associate an alias (name that identifies the

device, such as “external lights”) to the MINI TIME

d. Manually control the relay output and activate the random switching

function

Note: The communication between app and MINI TIME is point-to-point.

This means that, even in the presence of multiple devices, the app can

communicate with only one at a time.

Vemer S.p.A.

I - 32032 Feltre (BL) • Via Camp Lonc, 16

e-mail: info@vemer.it - web site: www.vemer.it

V3IS01186-010

Mod. Mini Time

Manuals

download

PDF

DIMENSION

DESCRIPTION

Key:

manual switching relay/reset

Green LED:

power supply/Bluetooth

connection status

Red LED:

relay status indication

CONNECTION DIAGRAM

04-2025

REFERENCE STANDARDS

EU CONFORMITY DECLARATION

Vemer declares that the device complies with the Communitary Directive

2014/53/UE (RED), 2011/65/UE and 2015/863/UE (ROHS)

• EN IEC 60730-2-7 • ETSI EN 301 489-1 • ETSI EN 301 489-17

• ETSI EN 300 328 • EN 62479 • EN IEC 63000

The full text of the EU Conformity Declaration is available at www.vemer.it address.

MOUNTING

• Apply the adapter corresponding to the civil series plate to be assemble

(see box 7)

• Connect the load and power supply (see connection diagram), insert the device

into the adapter

• Fix the supplied civil series plate

The adapters inside the box allow the assembly of the following plates:

ADAPTERS

Adapter

Plate

AM ABB: Mylos

A4 AVE: S44

BA BTICINO: Axolute, Axolute AIR

BL BTICINO: Light, Living International, LivingLight, LivingLight AIR

BM BTICINO: Matix

GC GEWISS: Chorus

VE VIMAR: Arké, Eikon, Eikon Evo

VP VIMAR: Plana

INSTALLATION AND PRELIMINARY OPERATIONS

KEYBOARD OPERATION

The key on the device, depending on the type of pressure exerted,

is used to perform the operations described in the table:

Pressure type Function

Short pressure Manual relay ON/OFF switching

Long pressure (> 3 sec) Lock (or unlock) the switching of the relay

Prolonged pressur (> 10 sec) Reset settings: reset all settings to factory default

NOTE: If the keyboard lock has been set by the app, all key presses will be

ignored. To unlock the device in case it is not possible to access the app,

you need to remove and reapply power to the timer and reset the device

(see Box 5). The keyboard remains unlocked for 30 seconds, which is

enough time to perform the procedure to restore default settings.

LED SIGNALS

The 2 LEDs on the device allow you to understand the operating status of the device, according to the types of switch on described in the table:

LED

Type of switch on

Operating status

GREEN

Steady on Normal operation

 Fast ashing Connection with smartphone successful

Short switch o Time or date not congured

RED

Steady on Relay status ON

O Relay status OFF

Short switch on

Relay status LOCK OFF

Short switch o Relay status LOCK ON



Fast ashing

Anomaly (reset the device see BOX 5)

GREEN + RED

Fast alternating ashing Device reboot

Simultaneous fast ashing Keypad lock enabled (displayed when the key is pressed)

Simultaneous slow ashing Anomaly (remove power from the device for at least 30 seconds and power it back on)

DEVICE RESET

Perform a reset to delete the settings and programs entered and return the

device to factory settings. To reset, hold down the button (at least 10

seconds) until the LEDs start to flash alternately.

: when the device is turned on for the first time or by performingImportant

a factory reset, the Bluetooth connection password is 123456

CONFIGURATION REMOTE CONTROL

information to users pursuant to art. 14 of the directive

2012/19 / EU of the european parliament and of the council

of 4 july 2012 on waste electrical and electronic equipment (WEEE)

If the crossed-out bin symbol appears on the equipment or packaging,

this means the product must not be included with other general waste

at the end of its working life.

The user must take the worn product to a sorted waste center,

or return it to the retailer when purchasing a new one.

Products for disposal can be consigned free of charge (without any new purchase obligation)

to retailers with a sales area of at least 400 m

, if they measure less than 25 cm.

An efficient sorted waste collection for the environmentally friendly disposal of the used device, or its

subsequent recycling, helps avoid the potential negative effects on the environment and people’s health,

and encourages the re-use and/or recycling of the construction materials.

• Mini Time can be installed on all supports compatible with any of the plates

shown in BOX 7 using the specific adapter included in the package.

• First fix the adapter to the support and then insert Mini Time into the adapter.

• Install and connect the device respecting the connection diagrams shown

in this manual.

• Access the store of your smartphone, install and start the free memo – Vemer app.

• Check that the Bluetooth and the GPS of your smartphone are active and the

consent to the memo - Vemer App to be able to identify the position (GPS) is

enabled (adapt the settings on the smartphone such as to be able to perform

this tracking; for further information see the instructions of your smartphone).

5 A / 250 VacL N

User manual

TIME/ASTRONOMICAL SWITCH WITH BLUETOOTH

Read all instructions carefully

Electronic digital switch for the management of electrical loads over time

through the relay (channel) available on board. Allows time programming

(daily or weekly periodicity) or astronomical (from sunset to sunrise).

The Bluetooth interface allows it to be coupled with smartphone or tablet

thanks to the free app, available free of charge for Android and iOS devices.

The application allows complete management of the device, allowing you to

program and make settings directly on your smartphone, and then transfer all

the data to the time switch. The reverse procedure is also possible, i.e. to copy

the programming of a time switch on your mobile device.

Mini Time is an electronic device that perform actions of 1B type, intended to

operate in environments with overvoltage category III and pollution degree 2

according to the EN 60730-1 standard.

Code

Model Description

VE798200 Mini Time Bianco Bluetooth daily/weekly/astronomical time switch white

VE798300 Mini Time Grigio Bluetooth daily/weekly/astronomical time switch grey

SAFETY WARNINGS

During product installation and operation it is necessary to observe the

following instructions:

1) The product must be installed by a qualified person, strictly in observance

of the connection diagrams shown in this manual.

2) The product must be installed and activated in compliance with current

electric systems standards.

3) After installation inaccessibility to the terminals without using dedicated

tools must be guaranteed

4) Do not use the product for anything other than the indicated purpose.

5) In the supply network there must be a bipolar disconnection.

6) In the electrical system upstream of the product must be installed a protection

device against the overcurrents.

7) Before accessing the connection terminals, make sure that the leads are not

live.

8) Do not connect or feed the product if any part of it is damaged.

9) The product can be used in environments with Measurement Category III

and Pollution degree 2, according to the Standard EN 60730-1

TECHNICAL FEATURES

• Power supply: 230 Vac (-15% ÷10%) 50/60 Hz

• Assorbimento: 0,5 VA (0,2 W)

• Output: 1 changeover relay 5 A / 250 Vac

• Installation on flush-mounted box with height 45 mm (dimensions: 1 module)

• Terminal block for cables with maximum cables section of 1,5 mm²

• Storable programs: 120 events

• Bluetooth communication interface

(active with mains power)

• Operating frequency band: 2400-2483,5 MHz

• Maximum transmitted radiofrequency power: 4 dBm

• LED: 2 Operation status LED

• Keyboard: 1 key for configuring and forcing relay output ON/OFF

• Operating temperature: 0°C ÷ 50°C

• Operating humidity: 20 ÷ 90% non condensing

• Storage temperature: -20°C ÷ 65°C

• Actions of type: 1B

• Protection degree: IP40 (on accessible parts)

Produkt Specifikationer

Mærke:	Vemer
Kategori:	Ikke kategoriseret
Model:	Mini Time

Har du brug for hjælp?

Hvis du har brug for hjælp til Vemer Mini Time stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Vemer Manualer

Vemer Mini Time Manual

20 Juni 2025

Vemer TCR Manual

2 Oktober 2024

Vemer Set PC RF8 Manual

1 Oktober 2024

Vemer ADR-D Vision Manual

22 September 2024

Vemer ES Manual

10 September 2024

Vemer Thalos RF Manual

3 September 2024

Vemer VE 502E Manual

1 September 2024

Vemer Elettrosonda Z Manual

25 August 2024

Vemer VE LAN Manual

10 August 2024

Vemer LCR048 Manual

10 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Frigidaire STACKIT3G Manual

20 Juni 2025

Life On Products LCAWA011 Manual

20 Juni 2025

Icom IC-F6330D Manual

20 Juni 2025

Helix AMPLIFY 201 DIRECT Manual

20 Juni 2025

Tekron PTP Translator Manual

20 Juni 2025

Phoenix Gold ZDT-MB2 Manual

20 Juni 2025

OmniMount OCM Manual

20 Juni 2025

Parkside PASA 20-Li C2 Manual

20 Juni 2025

Levenhuk Zeno Desk D7 Manual

20 Juni 2025

OmniMount 75/100 FD Manual

20 Juni 2025