Vent-A-Hood AH12-242 Manual


Læs gratis den danske manual til Vent-A-Hood AH12-242 (6 sider) i kategorien Emhætte. Denne vejledning er vurderet som hjælpsom af 6 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 3.5 anmeldelser. Har du et spørgsmål om Vent-A-Hood AH12-242, eller vil du spørge andre brugere om produktet?

Side 1/6
Page 1L124 0908A
U
L
CUS
R
Read and Save These Instructions
All Hoods Must Be Installed By A Qualied Installer
INSTALLATION INSTRUCTIONS
AH12 WALL MOUNT HOOD
Read All Instructions Thoroughly Before Beginning Installation
WARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,
OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:
A. Installation work and electrical wiring must be done by qualied
person(s) in accordance with all applicable codes and standards,
including re-rated construction. Switch power off at service panel
and lock the service disconnecting means to prevent power from
being switched on accidentally during installation.
B. When cutting or drilling into wall or ceiling, do not damage electrical
wiring and other hidden utilities.
C. Ducted fans must always be vented to the outdoors.
D. Sufcient air is needed for proper combustion and exhausting
of gases through the ue (chimney) of fuel burning equipment to
prevent back drafting. Follow the heating equipment manufacturers
guideline and safety standards such as those published by the
National Fire Protection Association (NFPA), and the American
Society for Heating, Refrigeration and Air Conditioning Engineers
(ASHRAE), and local code authorities.
WARNING - TO REDUCE THE RISK OF FIRE, USE ONLY METAL
DUCTWORK


Produkt Specifikationer

Mærke: Vent-A-Hood
Kategori: Emhætte
Model: AH12-242

Har du brug for hjælp?

Hvis du har brug for hjælp til Vent-A-Hood AH12-242 stil et spørgsmål nedenfor, og andre brugere vil svare dig




Emhætte Vent-A-Hood Manualer

Emhætte Manualer

Nyeste Emhætte Manualer