Ventus K0382 Manual

Ventus Vejrstation K0382

Læs nedenfor 📖 manual på dansk for Ventus K0382 (20 sider) i kategorien Vejrstation. Denne guide var nyttig for 18 personer og blev bedømt med 4.6 stjerner i gennemsnit af 9.5 brugere

Download PDF

Side 1/20

INSTRUCTION MANUAL OF K0382

Wireless Indoor and Outdoor Thermometer- Clock with Weather Station

QUICK START

1. Slide open the battery cover at the back of your wireless thermometer-clock.

2. Insert 2 x AAA batteries into the battery compartment by observing the correct + / -

polarity signs inside the battery compartment.

3. Replace the battery cover. In few seconds the LCD shows the default time, calendar

and the current indoor temperature and it starts to search for outdoor temperature

signal.

4. Then insert 2 x AAA batteries into the outdoor sensor. The outdoor temperature will

be displayed with “CH1” shown on the lower line of the LCD. Your Thermometer-

clock will be synchronized with outdoor sensor at Channel 1, the outdoor

temperature will be displayed.

Remarks:

Keep in mind that your outdoor sensor has a 100-feet open air transmission with no

obstructions. Actual transmission range will vary depending on what is in the path of the signal.

Each obstruction (roof, walls, floors, ceilings, thick trees, etc.) will effectively cut signal range in

half.

TO SET CALENDAR, 12/24 TIME AND TIME

1. Press and hold SET / ALM SET for 2 seconds, time digits change to year “2008 YR”

and flash. Press + / - to set year.

2. Then press SET / ALM SET once again, month digits flash. Press +/- button to set

month.

3. Then press SET / ALM SET once again, date digits flash. Press +/- button to set

date.

4. Press SET / ALM SET once again, time digits change “24 Hr”, press +/- to select “12

Hr” time format or “24 Hr” time format. When “12 Hr” is selected, AM / PM icon will

be displayed.

5. Then press SET / ALM SET once again, time digits “0:00” show up and the hour

digits flash. Press +/- to set the hours.

6. Then press SET / ALM SET once again, minute digits flash. Press +/- button to set

the minutes.

7. Press SET / ALM SET to return to normal mode, or it will return to normal mode in

around 8 seconds if no press of any other buttons.

TO SET ALARM TIME

Press SET / ALM SET once, time digits change to alarm time digits “AM 7:00 AL”. Then press

and hold SET / ALM SET for 2 seconds, the hour digits flash. Press +/- to set your desired

hours of alarm time.

Press SET / ALM SET again, alarm minute digits flash. Press +/- to set alarm minutes.

Press SET / ALM SET again, time digits change to “05” and flash. Press +/- to set the snooze

duration from 1 to 20 minutes.

Press SET / ALM SET to return to normal mode, or it will return to normal mode in around 30

seconds if no further press of any other buttons.

TO TURN ON OR OFF YOUR ALARM

Press SET / ALM SET once to display the alarm time. When alarm time is displayed, press + to

turn on / off the daily alarm. When the alarm function is turned on, the icon appears

between the hour and minute digits.

TO USE SNOOZE ALARM

When time reaches your set alarm time, your clock will give beep sound to wake you up. The

icon will flash.

1) Press SNOOZE once to stop the alarm temporarily, the icon keeps flashing. The

alarm will beep again in 5 minutes.

Produkt Specifikationer

Mærke:	Ventus
Kategori:	Vejrstation
Model:	K0382

Har du brug for hjælp?

Hvis du har brug for hjælp til Ventus K0382 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Vejrstation Ventus Manualer

14 Januar 2025

21 December 2024

31 August 2024

31 August 2024

31 August 2024

31 August 2024

17 August 2024

8 Juli 2024

8 Juli 2024

8 Juli 2024

Vejrstation Manualer

Nyeste Vejrstation Manualer

Bresser VentAir V Manual

14 Marts 2025

9 Marts 2025

9 Marts 2025

9 Marts 2025

9 Marts 2025

9 Marts 2025

9 Marts 2025

9 Marts 2025

9 Marts 2025

9 Marts 2025