Ventus W185 Manual


Læs nedenfor 📖 manual på dansk for Ventus W185 (4 sider) i kategorien Vejrstation. Denne guide var nyttig for 23 personer og blev bedømt med 4.6 stjerner i gennemsnit af 12 brugere

Side 1/4
W185. WIRELESS VFD WEATHER STATION Owners Manual
Name and Functions of Buttons:
Press Functions Hold 3 seconds
CHANNEL/SNOOZE Toggle Indoor & channel 1, 2, 3, auto-scroll Search for remote sensor
Trigger snooze alarm & extend backlight
CLOCK Read time, calendar and day-of-the-week Set Clock & Calendar
ALARM Read alarm time; enable/disable alarm Alarm time setting
UP 1 step forward in setting Fast advance
Down 1 step backward in setting Fast backward
MEM Read max/min readings Clear memory record
HEAT INDEX/ Read heat index & dew point
DEW POINT
C/F Toggle degree C & F unit
Slide Switch
BACKLIGHT (AUTO/ HIGH / LOW / OFF) Display brightness setting
(*** AUTO mode is recommended to adjust the brightness automatically)
BATTERY & ADAPTER INSTALLATION
Home Receiver Unit:
Main Power Source: Plug in the 7.5V adapter into the adapter socket at the back for basic operation
Backup Power: 2 pieces of LR44 lithium batteries are included in the unit to backup the time & calendar
setting. Pull out the plastic insulation sheet from the back casing to operate.
To replace the batteries, loosen the screw on the battery cover, replace 2 pieces of LR44
lithium batteries according to the polarity indicated, close the battery cover.
Remote Sensor: Loosen the screws on the battery door with a small screwdriver, insert 2 pieces of AAA
batteries according to the polarity indicated. Replace the cover and tighten the screws.
SETTING UP THE WIRELESS THERMO-HYGROMETER:
Place the main unit away from metal & source of interference such as mobile phones, appliances, TV etc.
For the first installation, always turn on the home unit and then the remote sensor. Set Channel 1 for the
first remote sensor. Set channel 2 and channel 3 for the 2
nd
and 3
rd
sensor.
Press and hold [CHANNEL/SNOOZE] button on main unit until a beep is sound to search for remote
sensor.
Press the [TX] button on the back of remote sensor to transmit RF signal.
When RF connection is established, the respective temperature & humidity of the selected channel will
appear on the main unit.
NOTE: If low battery indicator ” appears on the remote sensor’s display, the RF transmission range will
drop and it may fail to connect with the main unit. Replace the batteries if necessary to ensure successful RF
connection.
WEATHER FORECAST & BAROMETRIC PRESSURE BAR CHART
The unit predicts weather condition of the next 12 – 24 hours based on the change of atmospheric pressure.
The coverage area is around 30 – 50 km. The weather forecast is based on atmospheric pressure change and
is about 70-75% correct. As weather conditions cannot be 100% correctly forecasted, we cannot be
responsible for any loss caused by an incorrect forecast.
SUNNY PARTLY CLOUDY CLOUDY RAINY STORMY
IN/OUT TEMPERATURE & HUMIDITY
Press [CHANNEL/SNOOZE] button to select indoor, Ch1, Ch2, Ch3 and auto-channel scrolling display
modes.
Press [C/F] button to select temperature unit C/ F.
To search for remote sensor, hold [CHANNEL/SNOOZE] on the main unit until a beep is sound. Then press [TX]
on the remote sensor to transmit RF signal to the receiver. When RF connection is established, the respective
temperature & humidity of the selected channel will appear on the main unit
IN/OUT HEAT INDEX
Heat Index combines the effects of heat and humidity. It is the apparent temperature of how hot the
heat-humidity combination makes it feels.
Press [Heat Index/Dew Point] button once to show the respective indoor or outdoor heat index. “HEAT INDEX
icon will appear.
IN/OUT DEW POINT
Dew point is the saturation point of the air, or the temperature to which the air has to be cooled in order to get


Produkt Specifikationer

Mærke: Ventus
Kategori: Vejrstation
Model: W185

Har du brug for hjælp?

Hvis du har brug for hjælp til Ventus W185 stil et spørgsmål nedenfor, og andre brugere vil svare dig