(Product model: HJ819)
1. As shown in Figure 1, press the battery cover latch backward with your thumb as shown by arrow 1, and at the
same time, use upward force as shown by arrow 2 to open the battery cover.
2. Insert the positive and negative electrodes of the battery into the battery compartment in the direction shown in
Figure 2, and then cover the battery cover.
3. When turning on the power switch of the remote control, do not simultaneously pull the remote accelerator trigger
and steering wheel to ensure that the startup detection function is normal.
Figure 1 Figure 2
Please read the product manual carefully before use. The pictures in the manual may differ from
the actual product, and the actual product shall prevail.
1. This product uses 2.4G automatic frequency matching technology and has strong anti-interference ability, enabling multiple
people to play simultaneously.
2. The speedboat is equipped with circular dazzling lights, making it quickly become the focus of observation. At night, you can
also see the direction clearly and play freely.
3. Off water induction: After the speedboat leaves the water surface, it will automatically cut off the power supply to avoid injury
from touching the high-speed rotating propeller.
4. Anti overturning function: In case of accidental capsizing during navigation, the speedboat can be quickly overturned through
the remote control to ensure normal navigation.
5. Low voltage protection function: When the battery of the speedboat is low during play, the lights of the speedboat quickly
flash, the green light of the remote control quickly flashes, and the speedboat is forced to drive at low speed, effectively
ensuring that the speedboat returns to shore.
6. The speedboat adopts full proportional control, with delicate and sensitive operation, making navigation more enjoyable.
7. The speedboat uses two130 strong magnetic motor, which is more powerful and can travel at a maximum speed of up
to 12km/h.
8. The speedboat adopts a 3.7V lithium-ion rechargeable battery to increase upgrade capacity and provide longer range.
9. The remote control is equipped with steering fine adjustment to ensure fast and convenient adjustment of the speedboat's
straight travel.
10. The remote control is equipped with a high and low speed switching function, allowing beginners to play happily.
11. The remote control is equipped with a power reminder function. When the red light on the remote control slowly flashes,
it indicates that the remote control has insufficient power. Please replace the battery in a timely manner.
12. Ultra long distance reminder function, when the speedboat exceeds the controllable signal range or environmental signal
interference, the green light on the remote control will slowly flash to prompt, ensuring that the speedboat is sailing within
the effective control range.
1 2 3 4 5
Product Plan Illustration
Packing list
Insert the lithium rechargeable battery configured for the
product into a USB charger (compatible with the buckle
and slot), and then plug the USB charger into the built-in
5V charger adapter or a powered on computer USB port.
At this time, a red light in the USB will light up to indicate
that the battery is charging (charging time is about 2 hours),
and a red light off to indicate that the charging is complete.
Please disconnect all connections
5
1
2
3
4
6
7
8
9
1
2
Length
Product
parameter
Width Height Frequency
Control
distance
High speed
driver time
Low speed
driver time
Max speed
250mm 80mm 70mm 2.4G ≈50m ≈45min ≈1.5hours ≈12km/h
3.7V Lithium
battery
4×1.5V AA
1. Remote control
4.
Speedboat battery
7. M2 nut
2, Speedboat
5,
Left propeller
8, Wrench
3,
Charging cable
6,
Right propeller
9, Display stand
Power switch
Remote control status indicator light
Receiving signal indicator light
Left trimming button
Right trimming button
Direction wheel
Throttle trigger
Battery compartment
Battery required
in the yacht
Battery required
in the transmitter
Function keys
(Click to transform the light)
(Double click on high / low speed)
(Long press to flip automatically)
Right propeller
M2 nut
Tail
Ship cover
Deck
Hull bottom
Left propeller
M2 nut
Ship cover knob
Technical Support and E-Warranty Certificate
EC REP: E-CrossStu GmbH
Mainzer Landstr.69, 60329 Frankfurt am Main
www.vevor.com/support
Manufacturer: Shantou Hongxunjie electronic technology Co., LTD
Address: No.6, south side of Dengfeng Road, Guangyi Street, Chenghai
Districtd,Shantou City, Guangdong Province
.
UK REP: YH CONSULTING LIMITED.
C/O YH Consulting Limited Office 147, Centurion House, London Road,
Staines-upon-Thames, Surrey, TW18 4AX
Imported to AUS
: SIHAO PTY LTD.
1 ROKEVA STREETEASTWOOD NSW 2122 Australia
Imported to USA: Sanven Technology Ltd.
Suite 250, 9166 Anaheim Place, Rancho Cucamonga, CA 91730
We continue to be committed to provide you tools with competitive price.
"Save Half", "Half Price" or any other similar expressions used by us only represents an
estimate of savings you might benefit from buying certain tools with us compared to the
major top brands and does not necessarily mean to cover all categories of tools offered
by us. You are kindly reminded to verify carefully when you are placing an order with us
if you are actually saving half in comparison with the top major brands.
This is the original instruction, please read all manual instructions carefully before
operating. VEVOR reserves a clear interpretation of our user manual. The appearance
of the product shall be subject to the product you received. Please forgive us that we
won't inform you again if there are any technology or software updates on our product.
Remote Control Boat Model: HJ819
FCC Information（
FCC ID: 2AW7820200807）:
CAUTION: Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate the
equipment!
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
1) This product may cause harmful interference.
2)This product must accept any interference received, including interference that
may cause undesired operation.
WARNING: Changes or modifications to this pr
oduct not expressly approved by
the party responsible for compliance could void the user's authority to operate the
product.
Note: This product has been tested and found to comply with the limits for a Class
B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation.
This product generates, uses, and can radiate radio frequency energy, and if not
installed an
d used in accordance with the instructions, it may cause harmful
interference to radiocommunications. However, there is no guarantee that
interference will not occur in a particular installation. If this product does cause
harmful interference to radio or television reception, which can be determined by
turning the product off and on, the user is encouraged to try to correct the
interference by one or more of the following measures.
· Reorient or relocate the receiving a
ntenna.
· Increase the distance between the product and the receiver.
· Connect the product to an outlet on a circuit different from that to which the
receiver is connected.
· Consult the dealer or an experienced radio/TV technician for assistance.
