Viking E-60-SS-IP Manual

Viking Intercomsystem E-60-SS-IP

Læs gratis den danske manual til Viking E-60-SS-IP (23 sider) i kategorien Intercomsystem. Denne vejledning er vurderet som hjælpsom af 38 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 19.5 anmeldelser. Har du et spørgsmål om Viking E-60-SS-IP, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/23

Features Applications

Specifications

www.VikingElectronics.com

Information: 715-386-8861

VoIP Entry Phones in 4 Attractive Finishes that

Mount in Standard Double Gang Electrical Boxes

• Compact: Front panel is the size of a typical double gang mid-size wall plate

• Mounting: Flush mounts in a double gang electrical box (2.25” deep x 3.65” wide x

2.84” tall minimum) or surface mounts in an optional (see ) for VE-5x5 DOD 424

mounting to a wall, post or Gooseneck Pedestal (EWP recommended) VE-GNP

• Available in 4 standard faceplate finishes: Brushed Stainless Steel, Oil Rubbed Bronze,

Textured Black and Satin White

• PNL-60 faceplates: Replacement faceplates with matching screws available in all four

standard finishes

• Self diagnostic reports via email (testing com, microphone, speaker, and switch)

• Automatic polling and programming software included

• 2 Amp relay contacts for door / gate or strobe light control SL-2

• Blue LED indicator

• SIP compliant (see page 2 for compatible SIP servers and IP phone systems)

• Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging

• PoE powered (class 1, <4 Watts)

• Automatic Noise Canceling (ANC) for proper operation in noisy environments

• VoIP eliminates the need for “Push to Talk” mode

• Network downloadable firmware

• Can be used with optional Secure Relay Controller ( ) RC-4A DOD 582

• Handsfree operation

• 304 stainless steel prevents corrosion on the stainless steel models

• Programmable to dial up to 5 numbers on busy or ring no answer

• Cycles through backup phone numbers on busy or no-answer

• Optional Enhanced Weather Protection (EWP), EWP products are designed to meet

IP66 Ingress Protection Rating, see DOD 859

• Hangs up on busy signal, time-out or touch tone command

• Remotely programmable

• Extended temperature range (-40°F to 140°F)

• Volume adjustments for microphone and speaker

• Optional Polling System available ( ) PB-100 DOD 232

• Optional or strobe light kit available ( and )SL-2 BLK-4-EWP DOD 242 653

Power: PoE class 1 (<4 Watts)

Maximum Sound Pressure: 89 dB SPL @ 1 m

Dimensions: Faceplate: 123.8 mm x 125.4 mm x 4.3 mm (4.875” x 4.938”

x 0.17”), Phone: 72 mm x 46 mm x 42 mm (2.84” x 1.8” x 1.65”)

Shipping Weight: 0.55 kg (1.2 lbs)

Operating Temperature: -40°C to 60°C (-40°F to 140°F)

Humidity - Standard Products: 5% to 95% non-condensing

Humidity - EWP Products: Up to 100%

Audio Codecs: G711u, G711a, G722

Network Compliance: IEEE802.3af PoE, SIP 2.0 RFC3261, 100BASE- TX

with auto cross over

Regulatory Compliance: FCC Part 15, CE, and Canada ICES-3 Class A

Connections: (1) RJ45 10/100 Base-T, (3) gel-filled butt connectors

Installation requires the assistance of a Network Administrator / IT Technician.

The E-60-IP Series are compact, vandal resistant VoIP Entry Phones designed to

provide quick and reliable handsfree communication for SIP VoIP phone systems

with PoE. The Series entry phones can be programmed from any TouchE-60-IP

Tone phone, PC, or remotely using a static IP address. The Entry phones can dial up

to 5 programmable numbers. On-board 2 Amp relay contacts are provided for

activating doorstrikes or gate controllers. An optional Secure Relay ControllerRC-4A

can also be used.

The E-60-IP’s compact size allows it to be mounted in a standard double gang

electrical box. The is available in four different attractive finishes to matchE-60-IP

your door hardware, light fixtures, etc. Replacement faceplates ( ) can beE-60 PNL60

purchased separately and are available in all four standard finishes. The E-60-IP’s

blue LED continually provides light for locating the push button in dark locations,

flashes during dialing and automatically lights again when the call is answered. All

programming parameters, including phone numbers and location numbers, are stored

in non-volatile memory, requiring no batteries. All units are PoE powered.

The E-60-IP-EWP Series IP Series shares all the features of the E-60- in addition to

Enhanced Weather Protection (EWP) for outdoor installations where the unit is exposed

to precipitation or condensation. EWP products are designed to meet IP66 standards

and may feature foam rubber gaskets, sealed connections, gel-filled butt connectors,

as well as potted circuit boards with internally sealed, field-adjustable trim pots and DIP

switches for easy on-site programming. For more information on EWP, see .DOD 859

• Gate Entrance

• Parking ramps/lots

• ATM machines

• Medical centers

• Lobbies

• Entryways

• Stadiums

• Convention centers

• Public access areas

E-60-SS-IP

“Brushed Stainless Steel”

(similar to Brushed Nickel)

Shown with optional surface VE-5x5

mount box & (not included)VE-LIGHT

E-60-BN-IP

“Oil Rubbed Bronze”

(satin dark brown powder

paint with fine copper metallic)

E-60-WH-IP

“White”

(satin white powder paint)

E-60-BK-IP

“Black”

(fine texture black powder paint)

PRODUCT

MANUAL

Designed, Manufactured and Supported in the USA E-60-IP Series

Double Gang Mount

VoIP Entry Phones

September 28, 2021

SECURITY & COMMUNICATION

VIKING

VoIP SIP System Compatibility

For compatibility and vendor specific detailed configuration instructions, see the Viking VoIP

SIP System Compatibility List, DOD 944. To open and download this PDF file:

1. Go to www.vikingelectronics.com

and enter in the search box 944

2. Click Application Note (DOD 944)

to open and download the PDF

Scan the QR code below to open

and download the Viking VoIP

SIP System Compatibility List - OR -

Important: Exclusion from this list means only that compatibility has not been verified, it does not mean

incompatibility. If you have questions, please call Viking Electronics at 715-386-8861.

Produkt Specifikationer

Mærke:	Viking
Kategori:	Intercomsystem
Model:	E-60-SS-IP
Kode for international beskyttelse (IP):	IP66
Bredde:	125.4 mm
Dybde:	4.3 mm
Højde:	123.8 mm
Vægt:	550 g
Produktfarve:	Rustfrit stål
Driftstemperatur (T-T):	-40 - 60 °C
Husmateriale:	Rustfrit stål
Dimensioner (BxDxH):	125.4 x 4.3 x 123.8 mm
Støjniveau:	89 dB
Forbindelsesteknologi:	Ledningsført
Certificering:	CE\nCanada ICES\nFCC Part 15\nSIP
Placering:	Væg
Netværksstandarder:	IEEE 802.3af
Nem at installere:	Ja
Antal knapper:	1
Antal udendørs enheder:	1
Strøm over Ethernet (PoE):	Ja
Stiktype:	RJ-45
Udendørsenhed inkluderet:	Ja
Godkendelsestype:	Adgangschip/kort