Vimtag P1 Manual

Vimtag Overvågningskamera P1

Læs gratis den danske manual til Vimtag P1 (2 sider) i kategorien Overvågningskamera. Denne vejledning er vurderet som hjælpsom af 34 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 17.5 anmeldelser. Har du et spørgsmål om Vimtag P1, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/2

Lens

IR LEDS

Light Sensor

Speaker

Microphone

Adapter

Micro SD

Card Slot

Micro SD Card Slot

FN Button

RESET

Infrared light adjustment.

Audio from the APP side.

Supply light under low-light condition

To connect Ethernet and Power.

Transfer the voice to vimtag APP.

Reserved function key.

Support Micro SD Card Storage ( up to 64G).

Long press RESET button when device is running

normal and after hear the hint tone, device will restore

factory settings and restart

Product Diagram

Adapter

RESET

RESRT

DC 5V

Cloud IP Camera

P1 Series

Quick Installation Guide

Description Introduction Description Introduction

Thank you for using Vimtag Cloud IP Camera, Please

follow these steps.

Ethernet Indicator

Light

Wi-Fi Indicator

Light

Green light flashes 3 times that shows Ethernet

connection successfully.

Green light flashes 3 times that shows Wi-Fi

connection successfully.

Ethernet Indicator

Light

Wi-Fi Indicator

Light

Reset needle For clicking the reset hole

Reset needle

‘Vimtag’ APP Installation

A.Scan 'Vimtag' APP QR code.

B. Download 'Vimtag' APP from APP Store(iOS ) or Play Store(Android).

Note: PC users pls download it as：http://vimtag.com/download/

Add Camera to APP

Power

Router

Phone

Router

Power

1. Connect cable and click the Ethernet icon.

2. When Ethernet indicator light flashes three times in green every three seconds,

which means the camera is connected to network successfully.

Method 1: Ethernet connection

Method 2: Wi-Fi connection

Network Connection

V1.1

Click the Wi-Fi connection icon, operate it uder the APP instrutions.

Note: please press RESET button for 1 second before operate, then can enter

the Wi-Fi configuration mode.

1. Assemble the camera and connect to power, download the Vimtag APP, then

2. Enter 'Device List' and click '+' icon at the top of left corner. Then scan the QR

code (or enter the ID code in the lable directly) to finish the 'add devices'.

About

SD card

Schedule recording

Network

Motion and Notiﬁcation

Check the camera's

software version and ID number.

Support up to 64G SD card storage.

Set the recording schedule

start and end time.

Can set up the camera W i-Fi

connection.

Set the motion detection alarm.

Could be storaged with

Cloud Box.

Storage Device

Add device

Alarm messages

Add your cloud camera to

your account through the icon.

When camera has set the motion

detection alarm, you can receive

the alarm message.

Device list View the video

Check the video and alarm message

Create Username & Sign in

Click to register the username.

Local video

Screen setting

Two-way audio

Photograph

View the video records

and alarm messages

Voice

Take a video for the monitoring

screen,when returning to the

monitoring video, that is the

end of the recording.

Speak when pressing the

two-way audio button.

Can take a real time photo when

viewing the video.

Click the icon to view the video

recording and alarm message.

Turn on the mic and speaker

then speak .

Device settings

It provides personalized

settings.

Adjust the camera mode,

brightness, contrast,

saturation, sharpness.

Device settings

Enter into the interface of ‘information and video viewing’ can see the alarm

information and video of storage device (Micro SD or cloud box), users can

quickly search the information and video by choose the time or category.

New Account - Select ‘Sign up’ from the Home Screen, input a username

and password of your choice, conﬁrm the password. Select ‘Sign up’.

Existing Account – Input existing Username and password. Press ‘Sign in’.

When you login to the account and access the device list, it will show multiple

cameras you have added at the same time. You can also use 'Add device' setting

and check the 'alarm message' on the interface.

Click the camera icon so that you can view the camera video, after you login to

the device list, you can skip the screen to control horizontal and vertical rotation.

You can also operate the 'video photo', 'Two-way audio' and 'setting'.

Access the settings interface, you can set all speciﬁcations and functions

of the camera. Such as: check camera details, change your password or

conﬁgure the camera network. You can manage the speciﬁcations and

functions based on your requirements.

Time

Quickly search record time.

Produkt Specifikationer

Mærke:	Vimtag
Kategori:	Overvågningskamera
Model:	P1

Har du brug for hjælp?

Hvis du har brug for hjælp til Vimtag P1 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Overvågningskamera Vimtag Manualer

Vimtag P1-S Manual

29 August 2024

Vimtag P1 Manual

29 August 2024

Overvågningskamera Manualer

Nyeste Overvågningskamera Manualer

Speco Technologies O4LB2 Manual

9 Oktober 2025

Vaddio ZoomSHOT 20 SE AVBMP Manual

9 Oktober 2025

Speco Technologies O8VB3 Manual

9 Oktober 2025

Caliber HWC202PT Manual

9 Oktober 2025

Speco Technologies N8NSP6TB Manual

8 Oktober 2025

Speco Technologies O5D1G Manual

8 Oktober 2025

Speco Technologies O4TDD1M Manual

8 Oktober 2025

Speco Technologies ZIPT471 Manual

8 Oktober 2025

Caliber HWC 404 Manual

8 Oktober 2025

Speco Technologies O4BLP2M Manual

8 Oktober 2025