Vivotek AW-IHT-1002 Manual

Vivotek bryter AW-IHT-1002

Læs gratis den danske manual til Vivotek AW-IHT-1002 (1 sider) i kategorien bryter. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Vivotek AW-IHT-1002, eller vil du spørge andre brugere om produktet?

Side 1/1
1. Install the switch in a ventilated and dry place that is free of electromagnetic source, vibration, moisture, and dust.
2. Make sure the ventilation openings on the switch are not blocked.
3. DC input (24V~56VDC). Follow the printed polarity for V+, V-, and Ground.
AW-IHT-0602 Industrial EN50155 M12 PoE Switch
Quick Installation Guide
The AW-IHT-0602 is a rugged M12 PoE switch designed for delivering a max. of 30 watts to powered devices. The uplink
port can be used to extend the connection to a remote site. With ruggedized and M12 connection design, it is t for IP
a wide range of operating temperatures ranging from -40°C to 75°C.
IMPORTANT:
INTRODUCTION
CONNECTION
* 1x PoE switch * 1x Quick Installation Guide
PACKAGE CONTENTS
WARNING - Always ground the power source to maintain a clean power input.
LAN/WAN
VDC 24~56
Alarm output
PW1 ON When V1+ and V1- are connected.
PW2 ON When V2+ and V2- are connected.
PW-FAIL
(Relay LED)
ON Either PW1 or PW2 is conncted.
OFF Both PW1 or PW2 are connected.
LAN
(Data LED)
ON Link port is detected.
OFF Link port is not detected.
Flashing Data is being transmitted or received.
PoE LED
- Green
ON PD is detected.
OFF PD is not detected.
Flashing Port is active, or current is over-loading.
LED DEFINITIONS


Produkt Specifikationer

Mærke: Vivotek
Kategori: bryter
Model: AW-IHT-1002

Har du brug for hjælp?

Hvis du har brug for hjælp til Vivotek AW-IHT-1002 stil et spørgsmål nedenfor, og andre brugere vil svare dig