T370 SERIES SIP Telephone
Copyright
Copyright Vogtec Technology Co., Ltd, all rights reserved.
Without the written permission of the Company, no unit or individual may copy or duplicate the
contents of this document without authorization and may not disseminate it in any form.
According to the law, reproduction includes translation into other languages or into other
formats.
When this document is disseminated in the network media, Vogtec Technology Co., Ltd allows
downloading or printing for private use.
No part of the document is allowed to be modified or used for commercial purposes. Vogtec
Technology Co., Ltd will not be liable for any damage or loss caused by illegal modification or
conversion of the document.
Ensure
Information on this guide is subject to change without notice. This Guide provides the most
accurate statements, information and suggestions as far as possible and does not guarantee any
express or implied composition. Users should take full responsibility for the application of
products.
Vogtec Technology Co., Ltd does not guarantee any of these guidelines, including, but is not
limited to, implied warranties of marketability and specific purposes. Vogtec Technology Co., Ltd
shall not be liable for any indirect or incidental losses arising from the misuse of this Guide.
Statement
The equipment meets the basic requirements of CE, FCC
and other relevant regulations.
The equipment complies with EU Security Directive 2006/95/EC and EMC Directive 2004/108/EC.
FCC Regulations Part 15
The equipment meets Part 15 of the FCC Regulations and shall comply with the following two
requirements when working:
1 The equipment will not produce harmful interference.
2 The equipment must accept any interference received, including interference that may result
in accidental operation.
Class B digital equipment or peripheral equipment:
Note: This equipment belongs to Class B digital equipment. According to the regulation of Article
15 of FCC, this kind of equipment is suitable for residential installation. If not installed or used
according to the instructions, the device may produce interference radiation affecting wireless
communication. However, this does not guarantee that interference will not occur in some
special installation methods. If the radio or television reception signal is disturbed when the
device is turned on or off, users can try the following measures to improve it:
1.Adjust or reinstall the radio or television receiving antenna.
2.Increase the distance between the device and the receiver.
