Vollrath VPP16 Manual

Vollrath Vakuum pakkemaskine VPP16

Læs gratis den danske manual til Vollrath VPP16 (16 sider) i kategorien Vakuum pakkemaskine. Denne vejledning er vurderet som hjælpsom af 23 personer og har en gennemsnitlig bedømmelse på 4.3 stjerner ud af 12 anmeldelser. Har du et spørgsmål om Vollrath VPP16, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/16
ENGLISH
Operator’s Manual
Item No. 26134-1 Rev 5/12/15
VACUUM PACKING MACHINE WITH DUAL 16” SEALING BARS
AND ADVANCED CONTROL SYSTEM (ACS)
Thank you for purchasing this Vollrath Vacuum Packing machine. Before operating the equipment, read and familiarize yourself with
the following operating and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Save the original box and
packaging. Use this packaging to ship the equipment if repairs are needed.
Item Model Description Voltage HZ Amps Plug
40834 VPP16
Vacuum Packaging Machine with Dual 16"
Sealing Bars and ACS
120 60 13 5-20P
Safety PrecautionS
To ensure safe operation, read the following statements and
understand their meaning. This manual contains safety precautions
which are explained below. Please read carefully.
WARNING
Warning is used to indicate the presence of a hazard that will or
can cause severe personal injury or death.
CAUTION
Caution is used to indicate the presence of a hazard that will or
can cause minor or major personal injury if the caution is ignored.
NOTICE is used to note information that is important but not
hazard-related.
These precautions should be followed at all times. Failure to follow
these precautions could result in injury to yourself and others.
■ Unplug when not in use.
■ Keep the machine and power cord away from open ames,
electric burners or excessive heat.
■ Do not operate unattended.
■ Do not operate if unit has been damaged or is malfunctioning
in any way.
function and PurPoSe
This machine is intended to vacuum seal food products in a
commercial kitchen environment. It is not intended for household,
industrial or laboratory use.
table of contentS
Section Page
Overview ............................................................................................... 2
Installation ............................................................................................ 2
Set the Time and Date .......................................................................... 2
Vacuum Pack a Product ....................................................................... 3
Packing Liquid Products ................................................................... 4
Create Custom Programs and Labels .................................................. 4
Create Programs and Labels Using the Online ACS Congurator .. 4
Create Programs Using the Control Panel ...................................... 8
Name the Programs ..................................................................... 9
Create Labels ............................................................................. 9
HACCP Data Log ................................................................................. 10
Daily Cleaning ...................................................................................... 11
Maintenance ......................................................................................... 11
Troubleshooting .................................................................................... 14
OperatOr’s Manual
2
ENGLISH
clearance requirementS
■ 6” (15 cm) clearance on all sides.
■ 12” (30.5 cm) above the machine to allow the lid to open.
■ Ambient temperature must be between 41-86 °F (5-30 °C). Never locate
the machine near a heat source. This can damage the lid.
inStallation
NOTICE: Do NOT tilt the machine. Tilting could enable oil to ow out of
the pump and cause damage to the machine.
1. Remove all packing material and tape, as well as any protective plastic
from the equipment.
2. Clean any glue residue left by the plastic or tape.
3. Place the vacuum pack machine on a at, level surface.
4. Install the included 4” (10.2 cm) legs. ETL Sanitation requires machine to
be used with included legs.
5. Check the oil gauge window on the side of the machine. Verify the oil level
is between the minimum and maximum ll lines.
NOTICE: Running the machine without oil or insufcient oil will
damage the machine and void the warranty.
6. Plug the power cord into a grounded electrical outlet that matches the
nameplate rated voltage.
NOTICE: Using a voltage other than the nameplate rated voltage will
cause damage to the unit. Incorrect voltage, modication to
the power cord or electrical components can damage the
unit and will void the warranty.
7. Run the Pump Conditioning program. See “Daily Cleaning” on page 11.
Set the time and date
The default time on the machine may not match your local time. If you plan
to use HACCP logging it is important to set the correct time. There are also
several date formats from which to choose. Both of these can be changed in
the Settings menu.
1. Turn on the machine.
Press and release the On/Off button. Allow approximately 7-10 seconds
for the display to load. The start-up screen will display information about
the software, time and date. For example:
1. Press ◄ until is highlighted. Press .
2. Enter the owner password 1324. Press .
(Press ▲to select a number. Press ►to enter to the next number.)
3. Press to enter the Settings menu.
4. Press ▼to 1.3 Date and Time. Press .
overview
machine overview
A
D
C
B
E
G
B
F
A
Lid
E
Oil Inspection Window
B
Seal Bars
F
Lid Retainer (not pictured)
C
Chamber
G
Seal Pad
D
Control Panel
control Panel overview
E
B
A
C
D
A
On/Off Button
D
Navigation Buttons
B
Stop Button
E
Enter Button
C
Display
PaSSword controlled acceSS
The machine has two levels of password controlled access - owner mode
and user mode. The machine will arrive in owner mode. This allows full-
access to all settings and programs. User mode locks the settings and
programs so they cannot be changes. To switch to user mode, login to the
machine using the user code.
Login As Access To Password
User Run programs and adjust printer settings 0000
Owner Change settings and edit programs 1324
NOTICE: The machine will remember the last password used. To
prevent unauthorized changes log in as user after changing
settings.

Produkt Specifikationer

Mærke: Vollrath
Kategori: Vakuum pakkemaskine
Model: VPP16

Har du brug for hjælp?

Hvis du har brug for hjælp til Vollrath VPP16 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Vakuum pakkemaskine Vollrath Manualer

Vollrath

Vollrath 40851 Manual

30 September 2025
Vollrath

Vollrath VP12 Manual

13 Juni 2025
Vollrath

Vollrath 40858 Manual

12 Juni 2025
Vollrath

Vollrath VPP16 Manual

11 Juni 2025
Vollrath

Vollrath VP16 Manual

11 Juni 2025

Vakuum pakkemaskine Manualer

Nyeste Vakuum pakkemaskine Manualer

Electrolux

Electrolux EVGB1 Manual

1 Oktober 2025
Chefman

Chefman RJ45-VS Manual

23 September 2025
Alfa

Alfa Force Manual

23 September 2025
Catler

Catler VS 813 Manual

23 September 2025
RGV

RGV Fresh Quality Magnet 110760 Manual

22 September 2025
Eta

Eta Aspira 7762 90000 Manual

22 September 2025
Eta

Eta 0028 99040 Manual

21 September 2025
Eta

Eta Caza 5762 90000 Manual

21 September 2025
Eta

Eta Atmos II 6762 90000 Manual

21 September 2025
Eta

Eta Vital Pump 0762 90010 Manual

21 September 2025