Vollrath VP12 Manual

Vollrath Vakuum pakkemaskine VP12

Læs gratis den danske manual til Vollrath VP12 (6 sider) i kategorien Vakuum pakkemaskine. Denne vejledning er vurderet som hjælpsom af 5 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 3 anmeldelser. Har du et spørgsmål om Vollrath VP12, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/6
ENGLISH
Operator’s Manual
Item No. 26131-1 Rev 2/23/15
Vacuum Packing machine with 12" Sealing Bar
Thank you for purchasing this Vollrath Vacuum Packing Machine. Before operating the equipment, read and familiarize yourself with
the following operating and safety instructions. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE. Save the original box and
packaging. Use this packaging to ship the equipment if repairs are needed.
Item Model Description Voltage Hz Amps Plug
40831 VP12
with 12" Sealing Bar
120 60 8.5
NEMA
5-15P
S Pafety recautionS
To ensure safe operation, read the following statements and understand
their meaning. This manual contains safety precautions which are
explained below. Please read carefully.
warning
Warning is used to indicate the presence of a hazard that will or can cause
severe personal injury or death.
cautiOn
Caution is used to indicate the presence of a hazard that will or can cause
minor or major personal injury if the caution is ignored.
NOTICE is used to note information that is important but not hazard-
related.
These precautions should be followed at all times. Failure to follow these
precautions could result in injury to yourself and others.
Unplug when not in use.
Keep unit and power cord away from open ames, electric burners or
excessive heat.
Do not operate unattended.
Do not operate if unit has been damaged or is malfunctioning in any
way.
f Punction and urPoSe
This unit is intended to vacuum seal food products in a commercial kitchen
environment. It is not intended for household, industrial or laboratory use.
OperatOr s anual’ M
2
ENGLISH
inStallation
c rlearance equirementS
The minimum clearance is 6 inches (15 cm) on all sides of the machine and
30 inches (76.2 cm) inches above the machine.
Ambient temperature must be between 41-86 °F (5-30 °C). Never locate the
machine near a heat source. This can damage the lid.
1. Remove all packing material and tape, as well as any protective plastic
from the equipment.
2. Clean any glue residue left by the plastic or tape.
3. Place the vacuum pack machine on a at, level surface.
4. Check the oil gauge window at the back of the machine. Verify the oil
level is between the minimum and maximum ll lines.
NOTICE: Running the machine without oil or insufcient oil will
damage the machine and void the warranty.
5. Plug the power cord into a grounded electrical outlet that matches the
nameplate rated voltage.
NOTICE: Using a voltage other than the nameplate rated voltage will
cause damage to the unit. Incorrect voltage, modication
to the power cord or electrical components can damage
the unit and will void the warranty.
6. Run the Pump Conditioning program. See “Pump Conditioning program”
on page 4 in this manual.
overview
a
B
D
c
e
c
F
a
Lid - Seals the chamber during the vacuum cycle
B
Chamber - Products are placed in the chamber with the
opening of the vacuum seal bag laid over the seal bar
c
Seal Bar - Seals the vacuum bag
D
Control Panel - Selects and programs functions
e
Seal Pad - Provides counter-pressure on the sealing bar
F
Lid Retainer - Holds lid closed when machine is not in use.
c Pontrol anel
B
a c e g h
D F
a
On/Off Button - Turns the machine On and Off.
B
Function Select Button - Selects vacuum or seal functions.
c
Oil Cleaning Program Button - Activates the pump cleaning
program.
D
Display - Shows the current value of the active function during
the program cycle or the set value of the selected function
when the machine is idle
e
Function LEDs - The LED for the function illuminates when
the function is active during the program cycle or when the
function is selected in the programming mode.
F
Increase Time / Vacuum Stop Button - During a packing
cycle, stops the current function and continues to the next step
in the program. In programming mode, increases the time of
the selected function.
g
Decrease Time / Stop Button - During a packing cycle,
interrupts all functions and cancels the cycle. In programming
mode, decreases the time of the selected function.
h
Vacuum Gauge - Shows the pressure value in the vacuum
chamber. A value of -1 bar is the equivalent of 99% vacuum.
oPeration
cautiOn
Do not touch the sealing bar when placing vacuum bags in the
chamber
Burn Hazard.
Sealing bar may become hot after repeated use.
NOTICE: Never pack products that can be damaged by vacuum
packaging.
Avoid packing warm products to reduce condensation and
corrosion risks for the pump.
Special instructions apply for packing liquid products. See
“Packing Liquid Products” on page 3.
The machine is designed for a maximum use of 5 hours per
day.
This machine is not designed for continuous use. Allow 15
seconds between packing cycles. Do not exceed a vacuum
time of 60 seconds.
If the machine has been in use for one hour, stop the
machine and allow it to cool to ambient temperature.
The machine must be moved or transported in an upright
position. The machine may NOT be tilted because this can
cause damage to the pump.
1. Press the power button to turn on the machine. The display shows codes
for the software revision. For example:
2. If the machine has not been used for a while, run the Pump Conditioning
Program. See “Pump Conditioning program” on page 4.
3. Place food product in a vacuum sealing bag.

Produkt Specifikationer

Mærke: Vollrath
Kategori: Vakuum pakkemaskine
Model: VP12

Har du brug for hjælp?

Hvis du har brug for hjælp til Vollrath VP12 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Vakuum pakkemaskine Vollrath Manualer

Vollrath

Vollrath VP12 Manual

13 Juni 2025
Vollrath

Vollrath 40858 Manual

12 Juni 2025
Vollrath

Vollrath VPP16 Manual

11 Juni 2025
Vollrath

Vollrath VP16 Manual

11 Juni 2025

Vakuum pakkemaskine Manualer

Nyeste Vakuum pakkemaskine Manualer

Gourmia

Gourmia GVS455 Manual

13 Juni 2025
Henkelman

Henkelman Aero 42 XL Manual

13 Juni 2025
Vacmaster

Vacmaster VP800 Manual

13 Juni 2025
Vacmaster

Vacmaster VP600 Manual

13 Juni 2025
VacPak-It

VacPak-It VMC12OP Manual

12 Juni 2025
Gourmia

Gourmia GVS445 Manual

11 Juni 2025
VacPak-It

VacPak-It VMC10DPU Manual

11 Juni 2025
Gourmia

Gourmia GVS415 Manual

11 Juni 2025
Gourmia

Gourmia GVS435 Manual

11 Juni 2025
Gourmia

Gourmia GVS425 Manual

10 Juni 2025