CAUTION: To prevent electrical shock, ensure electricity has
been turned off at the circuit breaker before beginning.
- Read all instructions before installing.
-
System is intended for installation by a licensed
electrician in accordance with the National Electrical Code (NEC)
and local regulations.
-
When handling the fixture, do not apply pressure to
the LEDs. Hold the fixture by the base only.
- PIXELS CONFIGURABLE LED LIGHT SHEETS have
polarity for connection.
WARNING: All parts must be used as indicated in these
instructions. This product is designed for use only with the supplied
parts and/or accessories designated for use by WAC Lighting.
Substitution of parts or accessories not designated for use with this
product by WAC Lighting could result in personal injury or property
damage and will void the warranty. Contact an authorized dealer or
the manufacturer if any parts are damaged or missing.
PIXELS CCT SELECT LED LIGHT SHEETS
MISE EN GARDE: Pour éviter tout choc électrique, assurez-vous
que le disjoncteur soit mis hors tension avant de commencer.
- Lisez toutes les instructions avant l’installation.
-
Le système doit être installé par un électricien licensié
conformément au code national de l’électricité (NEC), et également
aux règlements locaux.
-
Lors de la manipulation du luminaire, n’appuyez pas sur les
LED. Tenez-le uniquement par la base.
- PIXELS CONFIGURABLE LED LIGHT SHEETS ont une
polarité pour la connexion.
ATTENTION:
Toutes les pièces doivent être utilisées comme
indiqué dans ces instructions. Ce produit est conçu pour être utilisé
seulement avec les pièces et/ou accessoires fournis pour être
utilisés avec les produits WAC Lighting. Remplacer des pièces ou
accessoires non conçus pour ce produit WAC Lighting pourrait
causer des dommages corporels ou matériels et pourrait également
causer l’annulation de la garantie. Veuillez contacter un revendeur
autorisé ou le fabricant si des pièces manquent ou sont
endommagées.
Determine the installation area and material. Different mounting accessories will be required depending on the mounting materials.
ACCESSORIES
2 inches Pixels to Pixels connector
Qty: 1pc