Waterstone 5600 Manual


Læs gratis den danske manual til Waterstone 5600 (7 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 14 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 7.5 anmeldelser. Har du et spørgsmål om Waterstone 5600, eller vil du spørge andre brugere om produktet?

Side 1/7
Model #s:
5500, 5600, 5610, 5200, 5210
TRADITIONAL PLP PULLDOWN FAUCET
INSTALLATION INSTRUCTIONS
5600
5500
5200
5610
5210
1 2 3 4
Turn o water supply. Observe all local
plumbing codes.
Inspect plumbing for signs of
damage. Replace as necessary.
DO NOT use petroleum based
products on this faucet.
REQUIRED TOOLS:
Phillips ScrewdriverAdjustable Wrench Channel Locks
BEFORE YOU BEGIN YOUR INSTALLATION:
F
COUNTER
OR SINK
1. 2. 3. 4.
A
B
C
DE
PULLDOWN FAUCET INSTALLATION
Remove the clamp nut (A) and
washer (B) from the threaded
shroud (C).
Slide washer and thread the
clamp nut onto threaded shroud.
Tighten nut snug to underside of
sink or counter.
Turn faucet to the desired handle
position. Securely tighten clamp
screws (F).
Fit exible hoses (D) and spray
connection tube (E) through hole
on counter or sink. (No plumbers
putty is required. O-ring seals base).
Waterstone faucets are designed to be installed in 3 dierent faucet
positions. Choose to have the handle on left, front or right. Your faucet is
factory congured for the most common positions - a front and right side
installation. To reverse this and have the handle positioned on the left,
connect the hose for cold water to the hot supply and the hose for hot water
to the cold supply. This will maintain the relationship of pulling the handle
for hot water or pushing for cold water. HANDLE ON LEFT HANDLE IN FRONT HANDLE ON RIGHT
HANDLE POSITION


Produkt Specifikationer

Mærke: Waterstone
Kategori: Ikke kategoriseret
Model: 5600

Har du brug for hjælp?

Hvis du har brug for hjælp til Waterstone 5600 stil et spørgsmål nedenfor, og andre brugere vil svare dig