Waves L2—UltraMaximizer Manual

Waves Ikke kategoriseret L2—UltraMaximizer

Læs gratis den danske manual til Waves L2—UltraMaximizer (18 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 44 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 22.5 anmeldelser. Har du et spørgsmål om Waves L2—UltraMaximizer, eller vil du spørge andre brugere om produktet?

Side 1/18
Waves L2 software guide page 1 of 18
L2—UltraMaximizer
Software audio processor
User's Guide
Waves L2 software guide page 2 of 18
Chapter 1 - About the L2
The L2-Ultramaximizer is the third-generation software processor, combining
an advanced peak limiter, level maximizer and a high performance re-
quantizer and dithering system called IDR (Increased Digital Resolution). In
addition, the L2 software processor includes Waves' ARC Auto-Release
Control system, and ninth-order noise-shaping in the IDR implementation.
Processing in the L2 is 48-bit (double precision) processing, offering
improvements for all resolutions, and the opportunity to dither to a 24-bit
output for archives and DVD. The L2 offers superb requantization for all bit-
depths, including 24, 22, 20, 18, and 16-bit outputs. The development of L2’s
lookahead peak limiter provides the mastering engineer with the capability to
increase sound file resolution and production master levels with precise
control and dithering options.
Waves IDR™ process brings more choices, greater control, and unmatched
compatibility to the mastering environment, whether for high-resolution CD or
low-resolution multimedia. IDR offers two dither types and three noise-
shaping curves for optimal processing in a wide variety of applications and
with a wide choice of source material.
While the operation of conventional limiters is well understood, the limiter
section of the L2-Ultramaximizer is capable of a very fast, overshoot-free
response, and once the limiter threshold has been set, the user can then go
on to define the actual peak level that the processed signal will reach. Once
set, limiting and level re-scaling becomes a one-shot process.
For mastering purposes, the peak level of the processed signal would
normally be set to 0dB, or just below 0dB. Because a typical digital audio file
of music contains many high intensity, short duration peaks, simple
normalization of the file may still result in a low average signal level. Using the
L2-Ultramaximizer however, it is generally possible to significantly increase
the average signal level of a typical audio file without introducing any audible
side effects. In the event that a deliberately limited sound is required however,
there is more than adequate range of the limiter parameters to recreate
‘vintage’ effects such as level pumping or severely limited dynamic range.
The Ultramaximizer is specifically designed for mastering, digital editing,
multimedia, and any application that requires limiting and/or requantization of
the digital signal with highest quality. In order to ensure the maximum possible
resolution of a processed signal, it is very highly recommended that the L2 be
used last in the processing chain. Failure to observe this will not prevent L2
from working, but you should be aware that both the absolute brickwall limiting
AND the benefits of IDR requantization will be compromised and will need re-
limiting to maintain the original level.
The L2 is available as a stereo processor only. It will not show under mono
inserts and to process mono data you will have to make it stereo or bus it to a
stereo Auxiliary input.


Produkt Specifikationer

Mærke: Waves
Kategori: Ikke kategoriseret
Model: L2—UltraMaximizer

Har du brug for hjælp?

Hvis du har brug for hjælp til Waves L2—UltraMaximizer stil et spørgsmål nedenfor, og andre brugere vil svare dig




Ikke kategoriseret Waves Manualer

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer