Wesco 273230 Manual

Wesco Ikke kategoriseret 273230

Læs gratis den danske manual til Wesco 273230 (5 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 3 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 2 anmeldelser. Har du et spørgsmål om Wesco 273230, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

Description

Thank you for purchasing a Wesco Long Deck Scissors Lift

Table. This table is designed for horizontal lifting and

transportation of loads. Please carefully read these

instructions before use and keep it on file for reference.

This product is distributed by:

Wesco Industrial Products, LLC

1250 Welsh Road

North Wales, PA 19454

Tel: 215-699-7031 Fax: 215-699-3836

Contact the factory for parts information and ordering.

Visit us on the web at www.wescomfg.com

Unpacking

When unpacking the Wesco Product, check carefully for

shipping damage and missing parts. If damage has occurred

or any parts are missing, file a claim with the delivering carrier

within 24 hours and notify the dealer from whom the unit was

purchased.

Warranty Repairs

If the unit does not work properly, contact your dealer or the

factory (215-699-7031) for units less than one year.

Non-Warranty Service

If units are older than one year, repairs can be made easily

on site with factory supplied parts.

NOTE: Do not send units to the factory for service without

first obtaining a “Return Merchandise Authorization” (RMA)

number from the customer service department. We will not

be responsible for merchandise returned without proper

authorization.

To Purchase Parts

To Order Parts contact Customer Service at:

Phone: 215-699-031

Fax: 215-699-3836

Specifications

Part Number 273230

Model Number LDT-3080

Capacity 2200 lbs

Table Size 30” Width x 80” Length

Raised Height 53.5”

Lowered Height 14.2”

Wheel Size 7” x 2”

Caster Size 3” x 1-1/2” (Swivel)

Weight 435 lbs

80” Long Deck Scissors Lift Tables

(Part # 273230)

Operating Instructions and Parts Manual

ATTENTION: TO INSURE SAFE AND EASY USE OF YOUR WESCO LIFT TABLE, READ THESE INSTRUCTIONS BEFORE USING.

General Safety Information

Warning: The Wesco Lift Tables are designed for a wide

range of uses. To insure safe use, the following instructions

must be adhered to.

1) Read these instructions carefully before operation and

get to know the performance and operation requirements

of the lift table.

2) Do not overload the hydraulic lift table. Overloading can

result in damage to the table and could cause injury.

3) Do not stand or sit on the table during operation.

4) Do not insert hands or feet under a lowering table.

5) Brake the table when loading goods to prevent it from

moving.

6) When loading, goods should be distributed uniformly over

the table’s top surface.

7) Loose or unstable goods are not permitted to be loaded.

Do not load and/or raise loose or unstable goods for fear

of injury.

8) Do not move table while lifting a load.

9) The table can only be moved on flat and hard ground, do

not use on sloped or rugged ground;

10) The safety valve only works in the hoisting process, if the

table has been hoisted, and then has overweight load on

it, the safety valve will not work (also possibly damaging

the unit).

11) When loading and unloading goods on hoisted table,

don’t drag goods in cross direction, which may cause

serious off-set loading and make the table turn over.

12) When maintaining and repairing the table, the stand bar

should be used to support fork arm in order to prevent

table from falling (there should be no load on the table).

Operation Instructions

Braking

Engage the brakes to prevent movement of the table and lift

and lower loads.

1) Press down on both brake pedals, situated above the

casters

2) Release the brakes by applying pressure to the other side

of the release pedals.

Lifting

Warning: Do not place load on side or end of table or

overload the lift table. Stay within its rated capacity shown

below.

Model

LDT-3080

Part Number

273230

Max Capacity (lbs)

2200

1) Press foot pedal to raise loads.

2) Use release lever to lower loads

3) Use locking pins to prevent lowering of loads.

ure 1

80” Long Deck Scissors Lift Tables

(Part # 273230)

Operating Instructions and Parts Manual

MAINTENANCE INFORMATION

Lubrication Points

Apply lubrication to these areas monthly.

REPLACEMENT PART INFORMATION

Frame Part Diagram

Roller Surface

(

Grease

)

Pedal Linkage Point

(

Oil

)

Cylinder Fitting

(

Oil

)

Produkt Specifikationer

Mærke:	Wesco
Kategori:	Ikke kategoriseret
Model:	273230

Har du brug for hjælp?

Hvis du har brug for hjælp til Wesco 273230 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret Wesco Manualer

18 September 2025

17 September 2025

17 September 2025

17 September 2025

17 September 2025

17 September 2025

17 September 2025

17 September 2025

17 September 2025

17 September 2025

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Aguilar TLC Compressor Manual

18 September 2025

Heissner F1-00 Manual

18 September 2025

ServIt 423SDW5H Manual

18 September 2025

Vestil CART-800-D-TS Manual

18 September 2025

Canarm AX10 Manual

18 September 2025

Vestil EXGATE-30-C Manual

18 September 2025

Vestil D-33-HD Manual

18 September 2025

Cadco Mobileserv CBC-GG-B4 Manual

18 September 2025

Cambro VBRTHD6158 Manual

18 September 2025

Valley Craft F88566C6 Manual

18 September 2025