WestBend 72002 Manual

WestBend Ikke kategoriseret 72002

Læs gratis den danske manual til WestBend 72002 (13 sider) i kategorien Ikke kategoriseret. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 3.8 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om WestBend 72002, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/13

WEST BEND®

ELECTRICAL SKILLET

Model No. 72000 through 72700

RECIPES AND INSTRUCTIONS

TO PREVENT PERSONAL INJURY OR PROPERTY DAMAGE, READ AND FOLLOW THE

INSTRUCTIONS AND WARNINGS IN THIS CARE AND USE INSTRUCTION MANUAL.

IMPORTANT SAFEGUARDS

Use electricity safely and wisely! Observe safety precautions when using your skillet including the following:

• Read all instructions before using.

• If the skillet features unassembled cover rest, knob or handle/legs, be sure they are assembled and fastened properly. See assembly

instructions later in this booklet.

• Always attach heat control to skillet first, then plug cord into wall outlet. After cooking and serving, turn heat control to “off” and

unplug from wall outlet. Let skillet cool before removing heat control. Do not leave skillet plugged in when not being used.

• Skillet should always be unplugged before cleaning.

• Do not let cord touch hot surfaces or hang over the edge of counter, table or other surface area.

• Your skillet and its heat control should not be used outdoors, placed near a hot gas or electric burner or placed in a heated oven.

• Do not immerse heat control, its cord and plug in water or other liquid.

• Do not touch skillet or its cover when they are hot. Use handles and knobs for lifting and carrying. Be very careful when moving skillet

if it contains hot liquid. Let cool before pouring out.

• Supervise closely when skillet is being used by or near children.

• Use your skillet only for cooking tasks described in this booklet. Do not use attachments with your skillet unless recommended by The

West Bend Company.

• Do not use your skillet if it or its cord or heat control has been damaged or if it is not working properly. Return your skillet, if it is

within the warranty period, to the West Bend Company for examination and/or repair.

SAVE THESE INSTRUCTIONS

Your skillet needs no special care other than cleaning. If servicing becomes necessary, within the warranty period, return your skillet to The

West Bend Company. See Warranty information for details. Do not attempt to repair it yourself.

WARNING: To prevent personal injury or property damage caused by fire, always unplug this and other appliances when not in use.

WARNING: This appliance may contain substances know to the State of California to cause cancer, birth defects or other reproductive

harm. FOR HOUSEHOLD USE ONLY

This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one

way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to

defeat this safety feature.

SPECIAL NOTE: This booklet contains instructions for electric skillets with different styles of covers and made of different materials such

as metal or glass. These different covers require special care and handling. Be sure to follow the correct care and handling instructions for

your particular skillet cover.

INSTRUCTIONS FOR CARE AND USE

• Clean Before Using

CAUTION: To prevent personal injury or electric shock, always remove heat control before immersing this product in water. Do not

immerse the heat control, its cord and plug in water or other liquid.

Wash skillet, cover, rack if included, in hot soapy water with a sponge or dishcloth to remove any manufacturing oils. Rinse thoroughly and

dry.

• Condition the Non-Stick Interior Surface

The non-stick surface must be conditioned to ensure stick-free cooking. Lightly wipe a teaspoon of cooking oil with paper toweling or

soft cloth over the entire surface. The skillet is now ready to use.

• Assemble Cover Knob or Strap Handle on Metal Cover.

Metal skillet cover will feature a knob or strap type handle which must be assembled before use. Follow directions below for assembly:

• Assemble Cover Knob

Parts Included: Tools Required:

Cover Knob Common Phillips Screwdriver

Phillips Screw

1. Remove screw form bottom of cover knob. Attach knob to cover with screw as shown in Diagram 1. Tighten with screwdriver

until secured, but do not over-tighten to prevent stripping of threads. Do not use cover without cover knob attached. See Diagram

below.

• Assemble Strap Handle

Parts Included: Tools Required:

Strap Handle Common Slotted Screwdriver

2 Slotted Screws

1. Remove handle and screws for plastic bag. Attached handle to cover with screws as shown in Diagram 2. Tighten with

screwdriver until secured, but do not over-tighten to prevent stripping of threads. Do not use cover without handles attached. See

Diagram 2.

• Assemble Handle/Leg Before Using (unassembled models only).

CAUTION: To prevent personal injury or property damage, be sure handles are securely attached before use. Never use skillet without

attached handle/legs. Make sure that screws are inserted straight into skillet mounting projections for proper assembly. To prevent stripping

of threads, do not over-tighten.

Parts Included:

2 Handle/Legs

4 Long Handle/Leg Screws

2 Leveling Washers

Tools Required:

Common Slotted Screwdriver

Handle/Leg Assembly:

1. Place the skillet upside down on tabletop or countertop.

2. Position one handle/leg on side of skillet with socket, lining up holes in handle with mounting projections on skillet. See Diagram

below.

3. Using appropriate screwdriver, securely attach handle with the screws provided (2 long screws per handle). See Diagram above.

Repeat steps 1 and 2 to assemble the second handle on the opposite side of the skillet.

4. To assure proper installation of skillet handles, place assembled unit right side up on a flat surface and lift item with handles.

Handles should feel tightly secured.

Produkt Specifikationer

Mærke:	WestBend
Kategori:	Ikke kategoriseret
Model:	72002

Har du brug for hjælp?

Hvis du har brug for hjælp til WestBend 72002 stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Ikke kategoriseret WestBend Manualer

WestBend Hershey's S'mores Maker 6203 Manual

31 August 2024

WestBend Cocoa Grande CL400BG Manual

31 August 2024

WestBend Food Strainer & Sauce Maker 220 Manual

31 August 2024

WestBend Stir Crazy Deluxe 82310CF Manual

31 August 2024

WestBend Waterbath Canner 35C Manual

31 August 2024

WestBend Hot Pot 53015 Manual

31 August 2024

WestBend Cocoa Latte 65032 Manual

31 August 2024

WestBend Grain Mill 555 Manual

31 August 2024

WestBend Cherry Stoner 63 Manual

31 August 2024

WestBend New Stir Crazy 82505 Manual

31 August 2024

Ikke kategoriseret Manualer

Nyeste Ikke kategoriseret Manualer

Metronic 451043 Manual

13 August 2025

Amaran Light Dome 60 Manual

13 August 2025

Sauermann CO 110 Manual

13 August 2025

Moulinex Virtuo IM1739 Manual

13 August 2025

Tefal Express Compact GV7315 Manual

13 August 2025

Cata X-MART 12 TIMER Manual

13 August 2025

Sauermann pH Safe 2 Manual

13 August 2025

Panduit WGCB24 Manual

13 August 2025

LD Systems U305 IEM Manual

13 August 2025

Watson VM-160-SE Manual

13 August 2025