Western Digital VelociRaptor 300GB Manual

Western Digital Harddisk VelociRaptor 300GB

Læs gratis den danske manual til Western Digital VelociRaptor 300GB (5 sider) i kategorien Harddisk. Denne vejledning er vurderet som hjælpsom af 30 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 15.5 anmeldelser. Har du et spørgsmål om Western Digital VelociRaptor 300GB, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/5

Internal Desktop

WD VelociRaptor

Quick Install Guide

™

-1-

Congratulations on purchasing a WD VelociRaptor! This document was designed to

aid in the quick installation of your new SATA hard drive. If you experience problems

following these procedures or need further information regarding the installation and

use of your drive, visit our website at support.wdc.com to search our online

knowledge base for frequently asked questions and other common troubleshooting

tips.

Compatibility

Windows® XP/2000/Vista

Note: Compatibility may vary depending on your

hardware configuration and operating system.

System Requirements

• SATA interface connector on motherboard, or

SATA controller card (sold separately) installed in

an available 32-bit PCI expansion slot (2.1- or

2.2-compliant).

• 3.5-inch internal drive bay.

Unpacking & Drive Handling

WD hard drives are precision instruments and

should be handled with care during unpacking and

installation. Hard drives can be damaged by rough

handling, shock and vibration, or electrostatic

discharge (ESD). Be aware of the following

precautions:

• This product contains no user-serviceable parts;

refer servicing to WD-authorized personnel only.

• Do not unpack your hard drive until you are ready

to install it. Your hard drive is packaged in an anti-

static bag.

• To avoid ESD problems, ground yourself by

touching the metal chassis of the computer before

handling the hard drive. Articles of clothing

generate static electricity. Do not allow clothing to

come in direct contact with the hard drive or

circuit board components.

• Handle the hard drive by its sides only. Avoid

touching the circuit board components on the

bottom of the hard drive.

• Do not drop, shake, or knock down the hard drive.

• Do not stack hard drives or stand your WD hard

drive on its edge.

Getting Started

1. Gather these materials and tools: WD hard drive

kit; computer system manual; operating system

manual and DVD or CD; SATA host controller

drivers (if applicable);Phillips and flat-blade

screwdrivers.

2. Before performing any hardware installation, back

up your existing data.

3. Before handling the hard drive or any other

components, discharge static electricity by

touching the metal chassis of your computer or by

using an anti-static wrist strap.

4. Locate and record your WD hard drive serial

number, model number, and date code on the

label on top of your drive.

5. Power off the computer and unplug the power

cord.

6. Remove the system cover (refer to your system

manual for instructions).

Kit Contents

WD Hard Drive*

Documentation

Mounting screws

SATA cable

*Important: The 2.5-inch WD VelociRaptor is

enclosed in a 3.5-inch mounting frame heat sink that

maintains drive temperature. Disassembling these

components will void the warranty.

ENG

Produkt Specifikationer

Mærke:	Western Digital
Kategori:	Harddisk
Model:	VelociRaptor 300GB
Bredde:	101.6 mm
Dybde:	147 mm
Højde:	26.1 mm
Vægt:	489 g
Brugervejledning:	Ja
Opbevaringstemperatur (T-T):	-40 - 70 °C
Relativ luftfugtighed ved drift (H-H):	5 - 95 %
Relativ luftfugtighed ved opbevaring (H-H):	5 - 95 %
Strømforbrug (standby):	4.53 W
Driftstemperatur (T-T):	0 - 60 °C
Strømforbrug (slukket):	0.42 W
HDD kapacitet:	300 GB
Driftshøjde:	-305 - 3050 m
Ikke-drift højde:	-305 - 12200 m
Kompatible operativsystemer:	Windows Vista/XP/2000
Grænseflade:	Serial ATA II
Intern:	Ja
Plug and play:	Ja
Driftsspænding:	5 V
HDD-størrelse:	2.5 "
HDD hastighed:	10000 rpm
Driftsvibrationer:	20-300 Hz, 0.75G G
Ikke-drift vibration:	20-500 Hz, 4.0G G
Gennemsnitlig ventetid:	5.5 ms
Lagringsdrev buffer størrelse:	16 MB
Start/stop-cyklusser:	50000
Skriv søgetid:	4.7 ms
Læs søgetid:	4.2 ms
Spor-til-spor søgetid:	0.7 ms
Bytes pr. sektor:	512
Emission af akustisk tryk:	36 dB
Drev klar tid:	10 sek./side