Whirlpool WSFP 4O23 PF X Manual

Whirlpool Opvaskemaskiner WSFP 4O23 PF X

Læs gratis den danske manual til Whirlpool WSFP 4O23 PF X (19 sider) i kategorien Opvaskemaskiner. Denne vejledning er vurderet som hjælpsom af 31 personer og har en gennemsnitlig bedømmelse på 4.7 stjerner ud af 16 anmeldelser. Har du et spørgsmål om Whirlpool WSFP 4O23 PF X, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/19
EN
1
Before using the appliance carefully read Health and Safety guide.
APPLIANCE
PRODUCT DESCRIPTION
THANK YOU FOR BUYING A WHIRLPOOL PRODUCT.
In order to receive a more complete assistance, please register your appliance on:
www.whirlpool.eu/register
1. Upper rack
2. Cutlery rack
3. Foldable aps
4. Upper rack height adjuster
5. Upper spray arm
6. Lower rack
7. Power Clean® support
8. Lower spray arm
9. Filter Assembly
10. Salt reservoir
11. Detergent and Rinse Aid dispensers
12. Rating plate
13. Control panel
6 7 8 9 10 12 13 141 2 3 4 5 1615 17 18 2019
h
11
1. ON-OFF button
2. PREVIOUS button
3. NEXT button
4. Tablet Detergent (All-in-one) button
5. Multizone button / Key Lock
6. Multizone indicator lights
7. Eco program indicator light
8. Start Delay indicator light
9. Display
10. Program number and remaining time indicator
INSTRUCTION FOR USE
CONTROL PANEL
11. Key Lock indicator light
12. Closed water tap indicator light
13. Rinse Aid rell indicator light
14. Salt rell indicator light
15. Tablet Detergent (All-in-one) indicator light
16. Sani Rinse button with indicator light
17. Turbo button with indicator light
18. Power Clean® button with indicator light
19. Start Delay button with indicator light
20. START/Pause button with indicator light
7
1
3
4
5
6
8
10
9
13
2
0000 000 00000
Service:
1112
2
FIRST TIME USE
SETTING MENU AND SALT
ADVICE REGARDING THE FIRST TIME USE
After installation, remove the stoppers from the racks and the reta-
ining elastic elements from the upper rack.
SETTING MENU
1. Switch on the appliance by pressing the button.ON/OFF
2. Switch o the appliance by pressing the button.ON/OFF
3. Hold down START/Pause button for 5 seconds, until you hear a
beep.
4. The display shows the rst available setting (letter „A”), followed by
its value (for example: 3).
5. Press PREVIOUS/NEXT button to scroll the list of the available
settings and to see their value (see the below table), then press
START/Pause if you want to change the value of the displayed set-
ting: its value will start blinking.
6. Use PREVIOUS/NEXT button to change the blinking value of the
selected settings, then press START/Pause to save the new value:
it will stop blinking.
7. To change another settings repeat steps 5-6.
8. To exit settings menu - press button. ON/OFF
LETTER SETTING VALUES
(Default - in bold)
Water Hardness Level
(see “setting the water hardness”
and “water hardness table”)
1 | 2 | | 4 | 53
Rinse Aid Level
(see “ADJUSTING THE DOSAGE OF
RINSE AID”)
1 | 2 | 3 | 4 | 5
Start Program
To set the cycle to show at switch
on of the appliance.
“E”= Eco, “L”= Last cycle run
E | L
Brightness Level
To adjust the brightness
level of the display.
“Lo”=Low, “Hi”= High
Lo | Hi
Sound Level
To adjust the volume of the sounds.
“OF” = sounds o, “Lo” = low volume,
“Hi” = high volume.
OF | Lo | Hi
Factory Settings
To restore to the factory default all
the values of the settings included
in the settings menu. After the
activation of this setting (ON), the
machine switches OFF and restores
the factory settings.
“On” = On, “OF” = O
On | OF
FILLING THE SALT RESERVOIR
The use of salt prevents the formation of LIMESCALE on the dishes and
on the machine’s functional components.
• It is important that the salt reservoir be never empty.
• It is important to set the water hardness.
The salt reservoir is located in the lower part of the dishwasher
(see PRODUCT DESCRIPTION) and should be lled when the SALT REFILL
indicator light in the control panel is lit.
1. Remove the lower rack and unscrew the
reservoir cap (anticlockwise).
2. -Only the rst time you do this: ll the salt re
servoir with water.
3. Position the funnel (see gure) and ll the salt
reservoir right up to its edge (approximately
1 kg); it is not unusual for a little water to leak
out.
4. Remove the funnel and wipe any salt residue
away from the opening.
Make sure the cap is screwed on tightly, so that no detergent can get
into the container during the wash program (this could damage the
water softener beyond repair).
As soon as this procedure is complete, run a program without loading.
The “Pre-Wash” program alone is not sucient.
Residual saline solution or grains of salt can lead to corrosion, irrepara-
bly damaging the stainless steel components.
The guarantee is not applicable if faults are caused by such circu-
mstances.
After the salt has been poured into the machine, the SALT REFILL in-
dicator light switches o.
Only use salt that has been specically designed for dishwashers.
If the salt container is not lled, the water softener and the he-
ating element may be damaged as a result.
Whenever you need to add salt, it is mandatory to complete the
procedure before the beginning of the washing cycle.
SETTING THE WATER HARDNESS
To allow the water softener to work in a perfect way, it is essential that
the water hardness setting is based on the actual water hardness in
your house. This information can be obtained from your local water
supplier.
The factory setting is “3” for average water hardness.
To change, follow instructions in section “SETTING MENU”.
Water Hardness Table
Level °dH
German degrees
°fH
French degrees
1 Soft 0 - 6 0 - 10
2 Medium 7 - 11 11 - 20
3 Average 12 - 17 21 - 30
4 Hard 17 - 34 31 - 60
5 Very hard 35 - 50 61 - 90

Produkt Specifikationer

Mærke: Whirlpool
Kategori: Opvaskemaskiner
Model: WSFP 4O23 PF X

Har du brug for hjælp?

Hvis du har brug for hjælp til Whirlpool WSFP 4O23 PF X stil et spørgsmål nedenfor, og andre brugere vil svare dig


Opvaskemaskiner Whirlpool Manualer

Whirlpool

Whirlpool WBC 3C26 X Manual

14 Januar 2025
Whirlpool

Whirlpool ADG 3556 IXM Manual

12 Januar 2025
Whirlpool

Whirlpool WFC 3C42 P X Manual

12 Januar 2025
Whirlpool

Whirlpool ADG 6450/1 NB Manual

14 Oktober 2024
Whirlpool

Whirlpool WSFP 4O23 PF X Manual

12 Oktober 2024
Whirlpool

Whirlpool WIC 3C22 P Manual

10 Oktober 2024
Whirlpool

Whirlpool ADG 7653 A+ NB Manual

8 Oktober 2024
Whirlpool

Whirlpool ADG 8517/1 WH Manual

14 Juli 2024
Whirlpool

Whirlpool WDT970SAKZ Manual

13 Juli 2024
Whirlpool

Whirlpool ADG 8340/2 WH Manual

12 Juli 2024

Opvaskemaskiner Manualer

Nyeste Opvaskemaskiner Manualer

Bosch

Bosch SKE52M75EU Manual

15 Januar 2025
Candy

Candy CDP 6853X/K Manual

15 Januar 2025
AEG

AEG F56529UM0 Manual

15 Januar 2025
Siemens

Siemens SN536S03ME Manual

15 Januar 2025
Miele

Miele G 5500 SCi Manual

15 Januar 2025
Amica

Amica ADF410WH Manual

15 Januar 2025
Hoover

Hoover DDY 65543FAM-S Manual

15 Januar 2025
Hotpoint Ariston

Hotpoint Ariston HFO 3O32 W C X Manual

15 Januar 2025
Bauknecht

Bauknecht GSIP 6198 AL Manual

15 Januar 2025
Zanussi

Zanussi ZDN11001WA Manual

15 Januar 2025