Whirlpool WUI75X15HZ Manual

Whirlpool Isterningmaskine WUI75X15HZ

Læs gratis den danske manual til Whirlpool WUI75X15HZ (26 sider) i kategorien Isterningmaskine. Denne vejledning er vurderet som hjælpsom af 39 personer og har en gennemsnitlig bedømmelse på 4.6 stjerner ud af 20 anmeldelser. Har du et spørgsmål om Whirlpool WUI75X15HZ, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/26
1
How Your Ice Maker Works
When you rst start your ice maker, the water pan will ll and the
system will rinse itself before starting to make ice. The rinsing process
takes about 5 minutes.
Under normal operating conditions, the ice maker will cycle at preset
temperatures. The ice level sensor located in the ice storage bin will
monitor the ice levels.
IMPORTANT: If the water supply to the ice maker is turned off, be
sure to set the ice maker control to OFF.
The Ice Making Process
1. Water is constantly circulated over a freezing plate. As the water
freezes into ice, the minerals in the water are rejected. This
produces a sheet of ice with a low mineral content.
User Guide
Ice Maker
LEARN MORE
In an effort to conser e ma a cove natural resource ths, is ic ker incl es ud ndensed User Guide. A complete User Guide can
be downloaded at www.whirlpool.com/manuals. The mode number l is located on e inth side of th e mae ic ker.
In e th U.S.A., register your ice maker at www.w .comhirlpool .
In da register ur Cana , yo ice maker at www.whirlpool.ca.
Para a instun version de estas rucciones en español, visite www.whirlpool.com.
You can be killed or seriously injured if you don’t immediately f .ollow instructions
You ca be killed or seriously injured if u don’t llow instructions.n yo fo
All sa ty messages will tell you what the potential hazard is, tell you how to reduce the chance of injur and tell you what can happen if thefe y,
inst ctions are not llowed.ru fo
Your safety and the safety of othe are very important.rs
We ha provided ma impove ny rtant sa ty messages in this manual and on your appliancfe e. Al ys read and obey all sa ty messagewa fe s.
This is the sa ty alert symbol.fe
This symbol alerts you to potential hazards that can kill or hurt you and others.
All sa ty messages will ll the sa ty aler “DANGER” or “WARNINGfe fo ow fe t symbol and either the word .”
These words mean:
DANGER
WARNING
IMPORTANT SAFETY INSTRUCTIONS
WARN G IN : To reduce the risk of fire, electric shock, or injury when using your ice maker, follow these basic
precautions:
SAVE THESE INSTRUCTIONS
P glug into a rounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do ot se an extension cord.n u
Disconnect power before cleaning.
Disconnect power before servicing.
Replace al nelsl parts and pa before operating.
Use two or more people to move and install ice maker.
Stat of alifornia Propositio 65 rnings:e C n Wa
WARNING This produc contains one or more hemical kn to th Stat of California to cause cancer.: t c s own e e
WARNING This produc contains one or more hemical kn to th Stat of California to cause bi de ct or othe reproductiv ha .: t c s own e e rth fe s r e rm
OPERATING YOUR ICE MAKER
W11256912A
11 Jun 2018 15:29:29 EDT | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e g "W12345678" becomes "400012345678")
2
2. When the desired thickness is reached, the ice sheet is released
and slides onto a cutter grid. The grid divides the sheet into
individual cubes.
3. The water containing the rejected minerals is drained after each
freezing cycle.
4. Fresh water enters the machine for the next ice making cycle.
5. Cubes fall into the storage bin. When the bin is full, the ice maker
shuts off automatically and restarts when more ice is needed. The
ice bin is not refrigerated, and some melting will occur. The
amount of melting varies with room temperature.
NOTE: As the room and water temperatures vary, so will the amount
of ice produced and stored. This means that higher operating
temperatures result in reduced ice production.
Using the Controls
1. To start ice production, press ON/OFF.
2. To stop ice maker operation, press ON/OFF.
NOTES:
■
Pressing the ON/OFF button does not shut off power to the ice
maker.
■
Allow 24 hours to produce the rst batch of ice. Discard the rst 2
batches produced.
FAST ICE Mode
Select the FAST ICE feature when you have an upcoming need for a
large amount of ice and the ice bin is low or empty. FAST ICE mode
will produce a greater quantity of ice in a 24-hour period.
■
Press FAST ICE while the ice maker is on. The indicator light will
illuminate.
■
Press FAST ICE again to turn off the FAST ICE feature. The
indicator light will turn off.
■
The FAST ICE mode will be on when you rst turn on the product.
It will turn off after 24 hours. To turn FAST ICE back on,
press FAST ICE.
Clean
It is recommended that you clean the ice maker when the “Cleaning
Needed” light is illuminated or 9 months has elapsed, or ice
production decreases signicantly. To clean your ice maker, see
“Ice Maker System” in the “Cleaning” section.
Door Ajar Alarm
The Door Ajar Alarm feature sounds an alarm when the ice maker
door is open for 5 minutes. The alarm will repeat every 2 minutes.
Close the door to turn off. The feature then resets and will reactivate
when the door is left open again for 5 minutes.
Water Filtration System
Installing a Water Filter
1. Purchase a Whirlpool approved water lter.
2. Take the water lter out of its packaging and remove the cover
from the O-rings. Be sure the O-rings are still in place after the
cover is removed.
3. The water lter compartment is located in the right-hand side of
the ice maker controls.
4. Using the arrow pointing to the alignment pin on the side of the
lter and the arrow inside the control housing, align the alignment
pin with the cutout notch and insert the lter into the housing.
Do not use with ter that is microbiologically unsa or wa fe
of unknown quality without adequate disin ction before fe
or after the system. Systems certified r cyst reduction fo
may be used on disinfected ters that may contain wa
filterable cysts.
A B C D
A. Cover
B. O-rings
C. Alignment pin
D. Alignment arrow
A
C
B
D
E
F
A. Alignment pin
B. Unlocked symbol
C. Locked symbol
D. Cutout notch inside control housing
E. Arrow pointing to cutout notch
F. Arrow pointing to alignment pin
11 Jun 2018 15:29:29 EDT | RELEASED
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e g "W12345678" becomes "400012345678")

Produkt Specifikationer

Mærke: Whirlpool
Kategori: Isterningmaskine
Model: WUI75X15HZ

Har du brug for hjælp?

Hvis du har brug for hjælp til Whirlpool WUI75X15HZ stil et spørgsmål nedenfor, og andre brugere vil svare dig


Isterningmaskine Whirlpool Manualer

Whirlpool

Whirlpool ADN108 Manual

18 April 2024
Whirlpool

Whirlpool ADN 102 Manual

25 December 2022
Whirlpool

Whirlpool WUI75X15HZ Manual

8 December 2022
Whirlpool

Whirlpool WZC5216LW Manual

25 November 2022

Isterningmaskine Manualer

Nyeste Isterningmaskine Manualer

Hoshizaki

Hoshizaki KM-161BWJ Manual

19 Juni 2025
Hoshizaki

Hoshizaki KM-1301SRJ3 Manual

19 Juni 2025
Hoshizaki

Hoshizaki KM-160BWJ Manual

19 Juni 2025
Hoshizaki

Hoshizaki KM-515MWJ Manual

19 Juni 2025
Hoshizaki

Hoshizaki KM-901MAH50 Manual

19 Juni 2025
Hoshizaki

Hoshizaki KMD-705MRJ Manual

19 Juni 2025
Hoshizaki

Hoshizaki KM-340MWJ Manual

19 Juni 2025
Hoshizaki

Hoshizaki KML-451MWH Manual

19 Juni 2025
Hoshizaki

Hoshizaki KM-80BAJ Manual

19 Juni 2025
Hoshizaki

Hoshizaki KM-1601SWH3 Manual

19 Juni 2025