AP-7 Cold Shoe Flash Adapter
Instructions continued on back >>
Wimberley, Inc. - - - Phone: 1 434 529 8385
1750 Broadway St Toll Free: 1 2746 -888-665-(USA & Canada)
Charlottesville, VA
22902 USA www.tripodhead.com info@tripodhead.com
5 Year Warranty – See www.tripodhead.com/warranty.cfm for complete details
About the AP 7-
The is a universal Flash Adapter which securely AP-7
holds most flashes, shoe cords or shoe adapters attached
to other devices.
Weight: .705 oz (adapter only)
Dimensions (Overall L x W x H): 1.8” x 0.75” x 0.55”
Materials: Anodized 6061 Aluminum, stainless steel, Nylon knob
Package Contents:
• Flash Adapter: 7 Universal Cold Shoe (Qty 1)AP-
• Thumb Screw: 1/4 20 x Length Thumbscrew (Qty 1)-7/16”
• Hex Key: 3/32 (Qty 1)
Nylon Thumbscrew
A large durable Nylon thumbscrew
engages the Stainless Steel Clamp-
ing Pusher. It is captivated by the
Stainless Stud. Withstands extreme
abuse (tested)
The Wimberley
Cold Shoe
Mounting Thumbscrew
A 1/4 20 Stainless Steel screw with plastic knob is -
included to allow attachment to 3rd Party Flash Brackets.
Stainless Pusher
The spring loaded pusher clamps
the foot in the cold shoe.
Mounting Hole
A standard female 1/4 20 thread is used to mount the cold shoe -
onto your desired bracket, adapter or fastener.
Anti Rotation Set Screw-
This set screw is useful for more permanent
installations to keep the shoe from loosening or
becoming misaligned (use included hex key)
The screw has a nylon patch to prevent it from
inadvertently loosening.
Flash Contact Cutout
The clamp has a channel cut in the top face with
ample clearance to avoid contact with the flash
pins and clamp body
Slide the off camera shoe cord or remote trigger equipped -
flash into the Flash Adapter until it stops and tighten the
knob.
Made in USA
