Workshop WS0900VA Manual

Workshop Støvsuger WS0900VA

Læs gratis den danske manual til Workshop WS0900VA (18 sider) i kategorien Støvsuger. Denne vejledning er vurderet som hjælpsom af 18 personer og har en gennemsnitlig bedømmelse på 4.8 stjerner ud af 9.5 anmeldelser. Har du et spørgsmål om Workshop WS0900VA, eller vil du spørge andre brugere om produktet?

Download PDF

Side 1/18

FOR QUESTIONS OR INFORMATION CONTACT US AT:

1-888-455-8724 from the US and Canada

www.WORKSHOPvacs.com

Part No. SP6863 Printed in Mexico

OWNER’S MANUAL

• Español - página 15

• Français - page 29

SAVE THIS MANUAL FOR FUTURE REFERENCE

WARNING:

To reduce the risk of injury, the user must read and understand the

owner’s manual before using this product.

• Wet/Dry Vac

• 6 U.S. Gallon/

22.5 Liter

• WS0600VA0

• 9 U.S. Gallon/

34.1 Liter

• WS0900VA0

SP6863-1 Workshop 6 9 GALLON:SP6439-3_ES.qxd 8/19/13 2:09 PM Page 1

Removal and Installation

of the Qwik Lock™ Filter

Filter Removal:

1. Hold the Filter tabs of the Qwik Lock™

Filter in each hand.

2. With one thumb on the Qwik Lock™

stud, which protrudes through the

integrated Filter plate, lift up on the

Filter tabs while pushing down on the

stud.

3. This action will cause the Filter to

release from the Filter cage. Slide

Filter off cage.

Filter Installation:

1. Carefully slide the Qwik Lock™ Filter

over the Filter cage and press down

on the outside edge of the Filter until

the rubber gasket on the bottom of the

Filter seats securely around the base

of the Filter cage and against the lid.

2. Align the small center hole in the top

of the Filter over the Qwik Lock™ stud

on the Filter cage. Press firmly on top

of the Filter near the stud to allow the

Filter to snap over the ball on the end

of the stud. The Filter is now attached.

Lid

Filter

Cage

Qwik

Lock™

Stud

Filter

Tabs (2)

Integrated Filter

Plate with Center

Hole

PUSH

DOWN

PULL

Rubber

Gasket at

Bottom of

Filter

(cutaway

view)

NOTE: Failure to properly seat the

bottom gasket could result in debris

bypassing the Filter.

WARNING: Do not operate

without Filter cage and float, as they

prevent liquid from entering the

impeller and damaging the motor.

FILTER REMOVAL & INSTALLATION

SP6863-1 Workshop 6 9 GALLON:SP6439-3_ES.qxd 8/19/13 2:09 PM Page 5

Produkt Specifikationer

Mærke:	Workshop
Kategori:	Støvsuger
Model:	WS0900VA

Har du brug for hjælp?

Hvis du har brug for hjælp til Workshop WS0900VA stil et spørgsmål nedenfor, og andre brugere vil svare dig

Dit navn*

Din email*

Skriv dit spørgsmål her

Støvsuger Workshop Manualer

Workshop WS0400DE Manual

30 August 2024

Workshop WS1200VA Manual

30 August 2024

Workshop WS1400CA Manual

30 August 2024

Workshop WS1200DE Manual

30 August 2024

Workshop WS0900VA Manual

30 August 2024

Workshop WS0600VA Manual

30 August 2024

Workshop WS1600VA Manual

30 August 2024

Workshop WS1600SS Manual

30 August 2024

Støvsuger Manualer

Nyeste Støvsuger Manualer

Domo DO250SC Manual

14 Juni 2025

I-Vac Animal S50 Manual

14 Juni 2025

Pullman AS5 Evolution Manual

14 Juni 2025

Work Hero WD20LSS Manual

14 Juni 2025

Pullman PV14 Manual

13 Juni 2025

Goodway DV-2-MET Manual

13 Juni 2025

Kärcher Sensor Bp Manual

13 Juni 2025

Pullman M7P Manual

13 Juni 2025

Makita XLC02 Manual

13 Juni 2025

Goodway AV-1200 Manual

13 Juni 2025