Worx WA5042 Manual

Worx Sav WA5042

Læs gratis den danske manual til Worx WA5042 (19 sider) i kategorien Sav. Denne vejledning er vurderet som hjælpsom af 37 personer og har en gennemsnitlig bedømmelse på 5.0 stjerner ud af 19 anmeldelser. Har du et spørgsmål om Worx WA5042, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/19
Cordless Circular Saw EN
Scie circulaire sans fil F
Sierra circular inalámbrica ES
P02
P14
P23
2
WARNING: Some dust created by power
sanding, sawing, grinding, drilling
and other construction activit ies contains
chemicals known to the State of California
to cause cancer, birth defects or other
reproductive harm. Some examples of these
chemicals are:
• Lead from lead-based paints;
• Crystalline silica from bricks and cement
and other masonry products
• Arsenic and chromium from
chemically-treated lumber.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemicals, work in a well ventilated area,
and work with approved safety equipment,
such as those dust masks that are specially
designed to filter out microscopic particles.
WARNING: This product can expose you
to chemicals including lead, phthalate
or bisphenol A which are known to the State
of California to cause cancer, birth defects or
other reproductive harm. Wash your hands
after use. For more information go to www.
P65Warnings.ca.gov.
WARNING: Read all safety warnings,
instructions, illustrations and
specifications provided with this power tool.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term power tool in the warnings refers to your
electric (corded) power tool or battery-operated
(cordless) power tool.
1. WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2. ELECTRICAL SAFETY
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with grounded
power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
b) Avoid body contact with grounded
surfaces such as pipes, radiators, ranges
and refrigerators. There is an increased risk
of electric shock if your body is grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the risk
of electric shock.
e) When operating a power tool outdoors,
use an extension cord suitable for
outdoor use marked “W-A” or “W”. Use of
a cord suitable for outdoor use reduces the risk
of electric shock.
f) If operating a power tool in a damp
location is unavoidable,use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric shock.
3. PERSONAL SAFETY
a) Stay alert, watch what you are doing
and use common sense when operating
a power tool. Do not use a power tool
while you are tired or under the influence
of drugs, alcohol or medication. A moment
of inattention while operating power tools may
result in serious personal injury.
b) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal
injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or
battery pack, picking up or carrying the
tool. Carrying power tools with your finger on
the switch or energizing power tools that have
the switch on invites accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotating part
of the power tool may result in personal injury.
e) Do not overreach. Keep proper footing
and balance at all times. This enables
better control of the power tool in unexpected
situations.
f) Dress properly. Do not wear loose
clothing or jewellery. Keep your hair and
clothing away from moving parts. Loose
clothes, jewellery or long hair can be caught in
moving parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce
dust-related hazards.

Produkt Specifikationer

Mærke: Worx
Kategori: Sav
Model: WA5042

Har du brug for hjælp?

Hvis du har brug for hjælp til Worx WA5042 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Sav Worx Manualer

Worx

Worx WG350E.9 Manual

3 September 2025
Worx

Worx WG350E Manual

3 September 2025
Worx

Worx WX516 Manual

20 August 2025
Worx

Worx Nitro WG325.9 Manual

3 Juli 2025
Worx

Worx Nitro WG325.1 Manual

30 Juni 2025
Worx

Worx Nitro WG350 Manual

30 Juni 2025
Worx

Worx Nitro WG350.9 Manual

30 Juni 2025
Worx

Worx WA0163 Manual

29 Juni 2025
Worx

Worx WX526L.9 Manual

29 Juni 2025
Worx

Worx WA0167 Manual

29 Juni 2025

Sav Manualer

Nyeste Sav Manualer

Bosch

Bosch EasyCut 50 Manual

15 September 2025
Gardenline

Gardenline GL-CC 36 Li Manual

15 September 2025
Gardenline

Gardenline BG-PC 5045 Manual

15 September 2025
Gardenline

Gardenline GLPC 41 Manual

14 September 2025
Bosch

Bosch GST 90 E Professional Manual

14 September 2025
Bosch

Bosch PTS 10 T Manual

14 September 2025
Tanaka

Tanaka ECV-5601 Manual

13 September 2025
Tanaka

Tanaka TCS 33EB Manual

13 September 2025
Tanaka

Tanaka TCS 2800S Manual

13 September 2025
Tanaka

Tanaka TCS 33EDP Manual

13 September 2025