Worx WG384.9 Manual

Worx Sav WG384.9

Læs gratis den danske manual til Worx WG384.9 (19 sider) i kategorien Sav. Denne vejledning er vurderet som hjælpsom af 32 personer og har en gennemsnitlig bedømmelse på 4.5 stjerner ud af 16.5 anmeldelser. Har du et spørgsmål om Worx WG384.9, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/19
Cordless Chain Saw
EN
F
ES
P02
P18
P31
2
WARNING: Some dust created by
power sanding, sawing, grinding, drilling
and other construction activities contains
chemicals known to the state of California
to cause cancer, birth defects or other
reproductive harm. Some examples of these
chemicals are:
• Lead from lead-based paints;
• Crystalline silica from bricks and cement
and other masonry products and
• Arsenic and chromium from chemically-
treated lumber.
Your risk from these exposures varies,
depending on how often you do this type
of work. To reduce your exposure to these
chemical:
Work in a well ventilated area, and
Work with approved safety equipment, such as
those dust masks that are specially designed
to filter out microscopic particles.
WARNING: This product can expose you
to chemicals including lead, phthalate or
bisphenol A which are known to the State of
California to cause cancer, birth defects or
other reproductive harm. Wash your hands
after use. For more information go to www.
P65Warnings.ca.gov.
WARNING: Read all safety warnings and
instructions. Failure to follow the warnings
and instructions may result in electric shock, fire and/
or serious injury.
Save all warnings and instructions for future
reference.
The term power tool in the warnings refer to your
electric (corded) power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with grounded power
tools. Unmodified plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with grounded surfaces
such as pipes, radiators, ranges and
refrigerators. There is an increased risk of
electric shock if your body is grounded.
c) Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d) Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the
power tool. Keep cord away from heat,
oil, sharp edges or moving parts. Damaged
or entangled cords increase the risk of electric
shock.
e) When operating a power tool outdoors, use
an extension cord suitable for outdoor use.
Use of a cord suitable for outdoor use reduces
the risk of electric shock.
f) If operating a power tool in a damp location
is unavoidable, use a residual current
device (RCD) protected supply. Use of an
RCD reduces the risk of electric shock.
3) Personal safety
a) Stay alert, watch what you are doing and
use common sense when operating a
power tool. Do not use a power tool while
you are tired or under the influence of
drugs, alcohol or medication. A moment of
inattention while operating power tools may
result in serious personal injury.
b) Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriate
conditions will reduce personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or battery
pack, picking up or carrying the tool.
Carrying power tools with your finger on the
switch or energizing power tools that have the
switch on invites accidents.
d) Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key
left attached to a rotating part of the power tool
may result in personal injury.
e) Do not overreach. Keep proper footing and
balance at all times. This enables better control
of the power tool in unexpected situations.
f) Dress properly. Do not wear loose clothing
or jewelry. Keep your hair, clothing and
gloves away from moving parts. Loose
clothes, jewelry or long hair can be caught in
moving parts.
g) If devices are provided for the connection
of dust extraction and collection facilities,
ensure these are connected and properly
used. Use of dust collection can reduce dust-related
hazards.
4) Power tool use and care
a) Do not force the power tool. Use the
correct power tool for your application.
The
correct power tool will do the job better and safer at

Produkt Specifikationer

Mærke: Worx
Kategori: Sav
Model: WG384.9

Har du brug for hjælp?

Hvis du har brug for hjælp til Worx WG384.9 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Sav Worx Manualer

Worx

Worx Nitro WG325.9 Manual

3 Juli 2025
Worx

Worx Nitro WG325.1 Manual

30 Juni 2025
Worx

Worx Nitro WG350 Manual

30 Juni 2025
Worx

Worx Nitro WG350.9 Manual

30 Juni 2025
Worx

Worx WA0163 Manual

29 Juni 2025
Worx

Worx WX526L.9 Manual

29 Juni 2025
Worx

Worx WA0167 Manual

29 Juni 2025
Worx

Worx Nitro WG325 Manual

29 Juni 2025
Worx

Worx Nitro WX501 Manual

25 Februar 2025
Worx

Worx Nitro WX501.9 Manual

25 Februar 2025

Sav Manualer

Nyeste Sav Manualer

Baumr-AG

Baumr-AG SMX120 Manual

1 August 2025
Scheppach

Scheppach KS1200 Manual

1 August 2025
RYOBI

RYOBI CS-1835 Manual

31 Juli 2025
Guede

Guede KS 450-55 Manual

31 Juli 2025
RYOBI

RYOBI CS-4016 Manual

31 Juli 2025
RYOBI

RYOBI RRS1801M Manual

31 Juli 2025
Skil

Skil 3540 CA Manual

31 Juli 2025
RYOBI

RYOBI One+ RPLS18X Manual

31 Juli 2025
RYOBI

RYOBI One+ RMS18254X Manual

31 Juli 2025
RYOBI

RYOBI RTBS18X Manual

31 Juli 2025