Worx WX473.1 Manual

Worx Stiksave WX473.1

Læs gratis den danske manual til Worx WX473.1 (24 sider) i kategorien Stiksave. Denne vejledning er vurderet som hjælpsom af 56 personer og har en gennemsnitlig bedømmelse på 4.9 stjerner ud af 28.5 anmeldelser. Har du et spørgsmål om Worx WX473.1, eller vil du spørge andre brugere om produktet?

Download PDF
Side 1/24
Jigsaw WX473 WX473.1 WX474
SAFETY AND OPERATING MANUAL
ORIGINAL INSTRUCTIONS
Jigsaw WX473 WX473.1 WX474
GENERAL POWER TOOL
SAFETY WARNINGS
WARNING: Read all safety
warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury.
SAVE ALL WARNINGS AND
INSTRUCTIONS FOR FUTURE
REFERENCE.
The term “power tool” in the warnings refers
to your electric (corded) power tool or battery-
operated (cordless) power tool.
1) WORK AREA SAFETY
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in
explosive atmospheres, such as in the
presence of flammable liquids, gases
or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose control.
2) ELECTRICAL SAFETY
a) Power tool plugs must match the
outlet. Never modify the plug in
any way. Do not use any adapter
plugs with grounded power tools.
Unmodified plugs and matching outlets
will reduce risk of electric shock.
b) Avoid body contact with grounded
surfaces, such as pipes, radiators,
ranges and refrigerators. There is an
increased risk of electric shock if your body
is grounded.
c) Do not expose power tools to rain or
wet conditions. Water entering a power
tool will increase the risk of electric shock.
d) Do not abuse the cord. Never use
the cord for carrying, pulling or
unplugging the power tool. Keep cord
away from heat, oil, sharp edges or
moving parts. Damaged or entangled
cords increase the risk of electric shock.
e) When operating a power tool
outdoors, use an extension cord
suitable for outdoor use. Use of a cord
suitable for outdoor use reduces the risk of
electric shock.
f) If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected
supply. Use of an RCD reduces the risk of
electric shock.
3) PERSONAL SAFETY
a) Stay alert, watch what you are
doing and use common sense when
operating a power tool. Do not use
a power tool while you are tired or
under the influence of drugs, alcohol
or medication. A moment of inattention
while operating power tools may result in
serious personal injury.
b) Use personal protective equipment.
Always wear eye protection. Protective
equipment such as dust mask, non-
skid safety shoes, hard hat, or hearing
protection used for appropriate conditions
will reduce personal injuries.
c) Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or
battery pack, picking up or carrying
the tool. Carrying power tools with your
finger on the switch or energising power
tools that have the switch on invites
accidents.
d) Remove any adjusting key or wrench
before turning the power tool on. A
wrench or a key left attached to a rotating
part of the power tool may result in
personal injury.
e) Do not overreach. Keep proper
footing and balance at all times. This
enables better control of the power tool in
unexpected situations.
f) Dress properly. Do not wear loose
clothing or jewellery. Keep your
hair, clothing and gloves away from
moving parts. Loose clothes, jewellery or
long hair can be caught in moving parts.
g)
If devices are provided for the
connection of dust extraction and
collection facilities, ensure these are
connected and properly used. Use of dust
collection can reduce dust-related
hazards.

Produkt Specifikationer

Mærke: Worx
Kategori: Stiksave
Model: WX473.1

Har du brug for hjælp?

Hvis du har brug for hjælp til Worx WX473.1 stil et spørgsmål nedenfor, og andre brugere vil svare dig


Stiksave Worx Manualer

Worx

Worx WX473.1 Manual

7 Oktober 2024

Stiksave Manualer

Nyeste Stiksave Manualer

Vonroc

Vonroc JS502AC Manual

14 Juli 2024
Makita

Makita 4304T Manual

13 Juli 2024
FERM

FERM JSM1034 Manual

13 Juli 2024
Vonroc

Vonroc JS501DC Manual

13 Juli 2024
FERM

FERM JSM1032 Manual

12 Juli 2024
Hilti

Hilti WSJ 110-ET Manual

8 Juli 2024
Black And Decker

Black And Decker KS700PE Manual

5 Oktober 2022
Metabo

Metabo STE 140 Plus Manual

5 Oktober 2022
Skil

Skil 4381 AG Manual

5 Oktober 2022
Maktec

Maktec MT431 Manual

5 Oktober 2022